component
1N5368BRLG
Public Made by Adomby adom
onsemi Zener Diodes, DO-27. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown1N5368BRLG
onsemi · Zener Diodes · DO-27
1N5368BRLG from onsemi, in a DO-27. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode terminal, indicated by the polarity band; positive side when the zener is reverse biased to regulate at VZ (44.65 V min, 47 V nom, 49.35 V max at IZT = 25 mA for 1N5368B). |
| 2 | Anode | passive | Anode terminal at the end opposite the polarity band; forward voltage VF is 1.2 V max at IF = 1.0 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DO-27 |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Zener Voltage | VZ | 44.65 | 47 | 49.35 | V | @ IZT = 25 mA, TA = 25°C | 3 |
| Maximum Zener Impedance | ZZT | 25 | Ω | @ IZT = 25 mA | 3 | ||
| Maximum Zener Impedance | ZZK | 210 | Ω | @ IZK = 1 mA | 3 | ||
| Leakage Current | IR | 0.5 | µA | @ VR = 35.8 V | 3 | ||
| Maximum Surge Current | Ir | 2.7 | A | PW = 8.3 ms, TA = 25°C | 3 | ||
| Voltage Regulation | ΔVZ | 0.8 | V | VZ measured at 10% and 50% of IZM | 3 | ||
| Maximum DC Zener Current | IZM | 100 | mA | TL = 25°C at 3/8 in from body | 3 | ||
| Forward Voltage | VF | 1.2 | V | @ IF = 1.0 A | 2 | ||
| Max. Steady State Power Dissipation | PD | 5 | W | @ TL = 25°C, Lead Length = 3/8 in | 1 | ||
| Power Derating above 25°C | 40 | mW/°C | Derate above 25°C | 1 | |||
| Operating and Storage Temperature Range | TJ, Tstg | -65 | 200 | °C | Max operating temperature for DC is 150°C; 200°C for pulsed low duty cycle or non-repetitive | 1 | |
| Junction-to-Lead Thermal Resistance | θJL | 25 | °C/W | 1 | |||
| Maximum Lead Temperature for Soldering | 260 | °C | 1/16 in. from case for 10 seconds | 1 | |||
| Zener Voltage Tolerance | -5 | 5 | % | B suffix JEDEC type | 2 | ||
| Test Current | IZT | 25 | mA | 3 |
CAD (KiCad official)
- Symbol:
1N5368BRLG - Footprint:
Diode_THT:D_DO-27_P15.24mm_Horizontal - 3D model: DO-27 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (7 pp, sha256
3f6fc7bbfc757336, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).