component
TMS320F28052FPNT
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMS320F28052FPNT
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-80(12x12)
TMS320F28052FPNT from Texas Instruments, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO22 | bidirectional | General-purpose I/O 22, muxed with EQEP1S and SCITXDB. |
| 2 | GPIO32 | bidirectional | General-purpose I/O 32, muxed with SDAA (I2C data), EPWMSYNCI and EQEP1S. |
| 3 | GPIO33 | bidirectional | General-purpose I/O 33, muxed with SCLA (I2C clock), EPWMSYNCO and EQEP1I. |
| 4 | GPIO24 | bidirectional | General-purpose I/O 24 with internal pullup enabled by default, muxed with ECAP1 and EPWM7A. |
| 5 | GPIO42 | bidirectional | General-purpose I/O 42 with internal pullup enabled by default, muxed with EPWM7B, SCITXDC and CTRIPM1OUT. |
| 6 | VDD | power_in | CPU and logic digital power pin; with internal VREG place one 1.2-µF capacitor between each VDD pin and ground. |
| 7 | VSS | power_in | Digital ground pin. |
| 8 | XRS | bidirectional | Open-drain device reset input and watchdog reset output with internal pullup; place 2.2 kΩ to 10 kΩ between XRS and VDDIO and any filter capacitor 100 nF or smaller. |
| 9 | TRST | input | JTAG test reset with internal pulldown; active high, must be held low during normal operation with an external pulldown (2.2 kΩ generally adequate). |
| 10 | ADCINA5 | input | ADC Group A, channel 5 input. |
| 11 | ADCINA4 | input | ADC Group A, channel 4 input. |
| 12 | ADCINA3 | input | ADC Group A, channel 3 input (op-amp). |
| 13 | ADCINA2 | input | ADC Group A, channel 2 input. |
| 14 | ADCINA1 | input | ADC Group A, channel 1 input (op-amp). |
| 15 | M1GND | power_in | Ground pin for amplifier (channels A1, A3, B1). |
| 16 | ADCINB2 | input | ADC Group B, channel 2 input. |
| 17 | ADCINB1 | input | ADC Group B, channel 1 input (op-amp). |
| 18 | ADCINA0/VREFOUT | input | ADC Group A, channel 0 input, shared with the buffered DAC voltage reference output VREFOUT. |
| 19 | VREFHI | input | ADC external reference used in ADC external reference mode and as the VREFOUT reference. |
| 20 | VDDA | power_in | Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin. |
| 21 | VSSA | power_in | Analog ground pin. |
| 22 | VREFLO | input | ADC low reference, always tied to ground. |
| 23 | ADCINA6 | input | ADC Group A, channel 6 input (op-amp). |
| 24 | ADCINA7 | input | ADC Group A, channel 7 input. |
| 25 | ADCINB3 | input | ADC Group B, channel 3 input. |
| 26 | ADCINB4 | input | ADC Group B, channel 4 input (op-amp). |
| 27 | M2GND | power_in | Ground pin for amplifier (channels A6, B4, B6). |
| 28 | ADCINB5 | input | ADC Group B, channel 5 input. |
| 29 | ADCINB6 | input | ADC Group B, channel 6 input (op-amp). |
| 30 | ADCINB0 | input | ADC Group B, channel 0 input. |
| 31 | ADCINB7 | input | ADC Group B, channel 7 input (op-amp). |
| 32 | PFCGND | power_in | Ground pin for amplifier (channel B7). |
| 33 | GPIO27 | bidirectional | General-purpose I/O 27, muxed with SCITXDC. |
| 34 | GPIO31 | bidirectional | General-purpose I/O 31 with internal pullup enabled by default, muxed with CANTXA, SCITXDB and EPWM7B. |
| 35 | GPIO30 | bidirectional | General-purpose I/O 30 with internal pullup enabled by default, muxed with CANRXA, SCIRXDB and EPWM7A. |
| 36 | GPIO9 | bidirectional | General-purpose I/O 9, muxed with EPWM5B and SCITXDB. |
| 37 | VSS | power_in | Digital ground pin. |
| 38 | VDDIO | power_in | Digital I/O buffer and flash power pin; single supply source when VREG is enabled, with a decoupling capacitor on each pin. |
| 39 | TEST2 | unconnected | Test pin reserved for TI; must be left unconnected. |
| 40 | GPIO26 | bidirectional | General-purpose I/O 26, muxed with SCIRXDC. |
| 41 | GPIO29 | bidirectional | General-purpose I/O 29, muxed with SCITXDA, SCLA (I2C clock), TZ3 and CTRIPPFCOUT. |
| 42 | GPIO28 | bidirectional | General-purpose I/O 28, muxed with SCIRXDA, SDAA (I2C data) and TZ2. |
| 43 | GPIO18 | bidirectional | General-purpose I/O 18, muxed with SPICLKA, SCITXDB and XCLKOUT. |
| 44 | GPIO17 | bidirectional | General-purpose I/O 17, muxed with SPISOMIA, EQEP1I, TZ3 and CTRIPPFCOUT. |
| 45 | GPIO8 | bidirectional | General-purpose I/O 8, muxed with EPWM5A and ADCSOCAO. |
| 46 | GPIO25 | bidirectional | General-purpose I/O 25 (other mux options reserved). |
| 47 | GPIO16 | bidirectional | General-purpose I/O 16, muxed with SPISIMOA, EQEP1S and TZ2. |
| 48 | GPIO12 | bidirectional | General-purpose I/O 12, muxed with TZ1, CTRIPM1OUT and SCITXDA. |
| 49 | GPIO7 | bidirectional | General-purpose I/O 7, muxed with EPWM4B and SCIRXDA. |
| 50 | GPIO6 | bidirectional | General-purpose I/O 6, muxed with EPWM4A, EPWMSYNCI and EPWMSYNCO. |
| 51 | X2 | output | On-chip crystal oscillator output; connect crystal or resonator across X1 and X2, leave unconnected if unused. |
| 52 | X1 | input | On-chip 1.8-V crystal oscillator input; connect crystal or resonator across X1 and X2, tie to GND if unused. |
| 53 | VSS | power_in | Digital ground pin. |
| 54 | VDD | power_in | CPU and logic digital power pin; with internal VREG place one 1.2-µF capacitor between each VDD pin and ground. |
| 55 | GPIO19 | bidirectional | General-purpose I/O 19, muxed with XCLKIN, SPISTEA, SCIRXDB and ECAP1. |
| 56 | GPIO39 | bidirectional | General-purpose I/O 39, muxed with SCIRXDC and CTRIPPFCOUT. |
| 57 | GPIO38/TCK/XCLKIN | bidirectional | General-purpose I/O 38 shared with JTAG test clock TCK (internal pullup) and external oscillator input XCLKIN. |
| 58 | GPIO37/TDO | bidirectional | General-purpose I/O 37 shared with JTAG test data output TDO (8 mA drive). |
| 59 | GPIO35/TDI | bidirectional | General-purpose I/O 35 shared with JTAG test data input TDI (internal pullup). |
| 60 | GPIO36/TMS | bidirectional | General-purpose I/O 36 shared with JTAG test-mode select TMS (internal pullup). |
| 61 | GPIO11 | bidirectional | General-purpose I/O 11, muxed with EPWM6B and SCIRXDB. |
| 62 | GPIO5 | bidirectional | General-purpose I/O 5, muxed with EPWM3B, SPISIMOA and ECAP1. |
| 63 | GPIO4 | bidirectional | General-purpose I/O 4, muxed with EPWM3A. |
| 64 | GPIO40 | bidirectional | General-purpose I/O 40 with internal pullup enabled by default, muxed with EPWM7A. |
| 65 | GPIO10 | bidirectional | General-purpose I/O 10, muxed with EPWM6A and ADCSOCBO. |
| 66 | GPIO3 | bidirectional | General-purpose I/O 3, muxed with EPWM2B and SPISOMIA. |
| 67 | GPIO2 | bidirectional | General-purpose I/O 2, muxed with EPWM2A. |
| 68 | GPIO1 | bidirectional | General-purpose I/O 1, muxed with EPWM1B and CTRIPM1OUT. |
| 69 | GPIO0 | bidirectional | General-purpose I/O 0, muxed with EPWM1A. |
| 70 | VDDIO | power_in | Digital I/O buffer and flash power pin; single supply source when VREG is enabled, with a decoupling capacitor on each pin. |
| 71 | VREGENZ | input | Internal voltage regulator enable with internal pulldown; tie to VSS to enable the internal 1.8-V VREG or to VDDIO to use an external 1.8-V supply. |
| 72 | VSS | power_in | Digital ground pin. |
| 73 | VDD | power_in | CPU and logic digital power pin; with internal VREG place one 1.2-µF capacitor between each VDD pin and ground. |
| 74 | GPIO34 | bidirectional | General-purpose I/O 34, muxed with CTRIPPFCOUT. |
| 75 | GPIO15 | bidirectional | General-purpose I/O 15, muxed with TZ1, CTRIPM1OUT and SCIRXDB. |
| 76 | GPIO13 | bidirectional | General-purpose I/O 13, muxed with TZ2. |
| 77 | GPIO14 | bidirectional | General-purpose I/O 14, muxed with TZ3, CTRIPPFCOUT and SCITXDB. |
| 78 | GPIO20 | bidirectional | General-purpose I/O 20 with internal pullup enabled by default, muxed with EQEP1A, EPWM7A and CTRIPM1OUT. |
| 79 | GPIO21 | bidirectional | General-purpose I/O 21 with internal pullup enabled by default, muxed with EQEP1B and EPWM7B. |
| 80 | GPIO23 | bidirectional | General-purpose I/O 23, muxed with EQEP1I and SCIRXDB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDIO supply voltage (I/O and flash) wrt VSS | VDDIO | -0.3 | 4.6 | V | 16 | ||
| VDD supply voltage wrt VSS | VDD | -0.3 | 2.5 | V | 16 | ||
| Analog voltage VDDA wrt VSSA | VDDA | -0.3 | 4.6 | V | 16 | ||
| Input voltage (3.3 V) | VIN | -0.3 | 4.6 | V | VIN (3.3 V) | 16 | |
| Input voltage (X1) | VIN | -0.3 | 2.5 | V | VIN (X1) | 16 | |
| Output voltage | VO | -0.3 | 4.6 | V | 16 | ||
| Digital input clamp current | IIK | -20 | 20 | mA | VIN < VSS or VIN > VDDIO | 16 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDDIO | 16 | |
| Junction temperature (abs max) | TJ | -40 | 150 | °C | 16 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 16 | ||
| Device supply voltage, I/O | VDDIO | 2.97 | 3.3 | 3.63 | V | 17 | |
| Device supply voltage CPU | VDD | 1.71 | 1.8 | 1.995 | V | When internal VREG is disabled and 1.8 V is supplied externally | 17 |
| Analog supply voltage | VDDA | 2.97 | 3.3 | 3.63 | V | 17 | |
| Device clock frequency (system clock) | 2 | 60 | MHz | 17 | |||
| High-level input voltage | VIH | 2 | V | 3.3 V; max VDDIO + 0.3 | 17 | ||
| Low-level input voltage | VIL | 0.8 | V | 3.3 V; min VSS, 0.3 | 17 | ||
| High-level output source current, all GPIO | IOH | -4 | mA | VOH = VOH(MIN), All GPIO pins | 17 | ||
| High-level output source current, Group 2 | IOH | -8 | mA | VOH = VOH(MIN), Group 2 | 17 | ||
| Low-level output sink current, all GPIO | IOL | 4 | mA | VOL = VOL(MAX), All GPIO pins | 17 | ||
| Low-level output sink current, Group 2 | IOL | 8 | mA | VOL = VOL(MAX), Group 2 | 17 | ||
| Junction temperature, T version | TJ | -40 | 105 | °C | T version | 17 | |
| High-level output voltage | VOH | 2.4 | V | IOH = IOH MAX | 21 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = IOL MAX | 21 | ||
| Input current low level, GPIO pullup enabled | IIL | -205 | -140 | -80 | μA | Pin with pullup enabled, VDDIO = 3.3 V, VIN = 0 V, All GPIO pins | 21 |
| Input current low level, XRS pin | IIL | -375 | -300 | -230 | μA | Pin with pullup enabled, VDDIO = 3.3 V, VIN = 0 V, XRS pin | 21 |
| Input current low level, pullup disabled | IIL | -2 | 2 | μA | Pin with pullup disabled, VDDIO = 3.3 V, VIN = 0 V | 21 | |
| Input current high level, pulldown disabled | IIH | -2 | 2 | μA | Pin with pulldown disabled, VDDIO = 3.3 V, VIN = VDDIO | 21 | |
| Input current high level, pulldown enabled | IIH | 28 | 50 | 80 | μA | Pin with pulldown enabled, VDDIO = 3.3 V, VIN = VDDIO | 21 |
| Output current, pullup or pulldown disabled | IOZ | -2 | 2 | μA | VO = VDDIO or 0 V | 21 | |
| Supervisor reset release delay time | 400 | 800 | μs | Time after BOR/POR/OVR event is removed to XRS release | 21 | ||
| Input capacitance | CI | 2 | pF | 21 | |||
| VDDIO BOR trip point | 2.78 | V | Falling VDDIO | 21 | |||
| VDDIO BOR hysteresis | 35 | mV | 21 | ||||
| VREG VDD output | 1.9 | V | Internal VREG on | 21 | |||
| Junction-to-case thermal resistance | RΘJC | 14.2 | °C/W | Air flow 0 lfm | 22 | ||
| Junction-to-board thermal resistance | RΘJB | 21.9 | °C/W | Air flow 0 lfm | 22 | ||
| Junction-to-free air thermal resistance | RΘJA | 49.9 | °C/W | High k PCB, air flow 0 lfm | 22 |
CAD (KiCad official)
- Symbol:
TMS320F28052FPNT - Footprint:
Package_QFP:LQFP-80_12x12mm_P0.5mm - 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
tms320f28052fpnt-etched.step/tms320f28052fpnt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tms320f28052fpnt.step/tms320f28052fpnt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (157 pp, sha256
3c41721233f1415c, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).