component
TPS25820DSSR
Public Made by Adomby adom
Texas Instruments USB Converters, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS25820DSSR
Texas Instruments · USB Converters · WSON-12-EP(2x3)
TPS25820DSSR from Texas Instruments, in a WSON-12-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Device input supply for the VBUS internal power switch, and for the VCONN switch on the TPS25820; the recommended supply range is 4.5 V to 5.5 V. |
| 2 | IN | power_in | Device input supply for the VBUS internal power switch, and for the VCONN switch on the TPS25820; the recommended supply range is 4.5 V to 5.5 V. |
| 3 | CHG | input | Charge logic input that selects between standard USB and 1.5-A Type-C current sourcing ability; the input range is 0 to 5.5 V, with VIH of at least 2 V and VIL of at most 0.8 V. |
| 4 | EN | input | Logic input that turns the device on and off; the input range is 0 to 5.5 V, with VIH of at least 2 V and VIL of at most 0.8 V. |
| 5 | FAULT | output | Open-drain logic output that asserts during overtemperature and/or VBUS current-limit conditions; the pull-up voltage is 0 to 5.5 V and the sink current is limited to 10 mA. |
| 6 | SINK | output | Open-drain logic output that asserts when a Type-C Sink is identified on the CC lines; the pull-up voltage is 0 to 5.5 V and the positive sink current is limited to 5 mA (100 ms moving average). |
| 7 | POL | output | Open-drain logic output that asserts when the CC2 pin is connected to the cable CC line, giving the information needed to mux the SuperSpeed lines; the pull-up voltage is 0 to 5.5 V and the positive sink current is limited to 5 mA (100 ms moving average). |
| 8 | REF | input | Analog input for the current reference; connect a 0.5%, 100-ppm, 100-kΩ resistor between this pin and GND. |
| 9 | CC1 | bidirectional | Analog input/output that connects to the Type-C receptacle CC1 pin; absolute maximum pin voltage is 6 V, and the TPS25820 can source up to 250 mA on CC1 or CC2 when supplying VCONN. |
| 10 | GND | power_in | Ground reference for the device; all voltages are specified with respect to this pin. |
| 11 | CC2 | bidirectional | Analog input/output that connects to the Type-C receptacle CC2 pin; absolute maximum pin voltage is 6 V, and the TPS25820 can source up to 250 mA on CC1 or CC2 when supplying VCONN. |
| 12 | OUT | power_out | VBUS power switch output rated for a positive source current of 1.5 A, with an absolute maximum sink current of 2.5 A while applying VBUS. |
| 13 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-12-EP(2x3) |
| Category | Interface |
| Pins | 13 |
CAD (KiCad official)
- Symbol:
TPS25820DSSR - Footprint:
Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 - 3D model: WSON-12-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps25820dssr-etched.step/tps25820dssr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps25820dssr.step/tps25820dssr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
d6bec2609091145a, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).