component
XC6209F502MR-G
Public Made by Adomby adom
Torex Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6209F502MR-G
Torex Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25-5
XC6209F502MR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet gives an input voltage range of 2V to 10V (VIN minimum is VOUT(T)+1.0V for 2.0V and above outputs), with an absolute maximum rating of 12.0V referenced to VSS. |
| 2 | VSS | power_in | Ground pin; all voltages in the datasheet are referenced to VSS, and VIN and VSS wiring should be kept low-impedance. |
| 3 | CE | input | ON/OFF control input; for type F (the active-high, no pull-down type) H enables the output and L turns it off, with VCEH minimum 1.6V and VCEL maximum 0.25V, and the datasheet warns that operation becomes unstable with the CE pin open. |
| 4 | NC | unconnected | No connection pin. |
| 5 | VOUT | power_out | Regulated output pin; for the 5.0V nominal output the datasheet gives 4.900V to 5.100V accuracy at 30mA (±2%), and the type F maximum output current is 300mA, with the current limit depending on the set output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Output Current | IOUTMAX | 300 | mA | VIN=E-3 (*7) | 8 | ||
| Load Regulation | ΔVOUT | 15 | 50 | mV | 1mA< IOUT <100mA | 8 | |
| Load Regulation 2 | ΔVOUT2 | 100 | mV | 1mA< IOUT <300mA | 8 | ||
| Dropout Voltage 1 | Vdif1 | 50 | 70 | mV | IOUT=30mA (5.0V output, 2% product) | 10 | |
| Dropout Voltage 2 | Vdif2 | 160 | 210 | mV | IOUT=100mA (5.0V output, 2% product) | 10 | |
| Supply Current (Type F) | IDD | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V; When VOUT≦0.95V, VCE=VIN=2.0V | 8 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS; When VOUT≦0.95V, VCE=VIN=2.0V | 8 | |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA; When VOUT≦1.75V, IOUT=10mA | 8 | |
| Input Voltage | VIN | 2 | 10 | V | 8 | ||
| CE 'H' Level Voltage | VCEH | 1.6 | V | 8 | |||
| CE 'L' Level Voltage | VCEL | 0.25 | V | 8 | |||
| CE 'H' Level Current (Type F) | ICEH | -0.1 | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V; When VOUT≦0.95V, VIN=VCE=2.0V | 8 | |
| CE 'L' Level Current | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS; When VOUT≦0.95V, VIN=2.0V | 8 | |
| Input Voltage (absolute maximum) | VIN | 12 | V | 5 | |||
| Output Current | IOUT | 500 | mA | IOUT≦Pd/(VIN-VOUT) (*1) | 5 | ||
| Power Dissipation SOT-25 | Pd | 250 | mW | 5 | |||
| Power Dissipation SOT-25 (PCB mounted) | Pd | 600 | mW | PCB mounted (*2) | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Thermal Resistance (SOT-25) | 166.67 | ℃/W | Board mount, natural convection, Ta=25℃ (reference board, 600mW point) | 25 |
CAD (KiCad official)
- Symbol:
XC6209F502MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files:
xc6209f502mr-g-etched.step/xc6209f502mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6209f502mr-g.step/xc6209f502mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (30 pp, sha256
c8d4c88259ea584e, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).