component
LP4069B6F
Public Made by Adomby adom
LOWPOWER Battery Management, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP4069B6F
LOWPOWER · Battery Management · SOT-23-6
LP4069B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output that is pulled low by an internal NMOS while the battery is charging and can be pulled high by an external resistor when the charge cycle completes. |
| 2 | GND | power_in | Connection to system ground. |
| 3 | BAT | power_out | Connection to the battery, which needs a 10µF tantalum capacitor for stability when no battery is attached and only a 1µF ceramic capacitor when a battery is attached. |
| 4 | VIN | power_in | Input power source to connect to a wall adapter, with the charger automatically disabled when the input rises above the 7V OVP threshold and the part rated to 28V input. |
| 5 | FULL | output | Open-drain charge status output that can be pulled high by an external resistor while charging and is pulled low by an internal N-channel MOSFET when the charge cycle completes. |
| 6 | ISET | passive | Charge current programming pin, where the charge current is set by connecting a 1% resistor (RISET) to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input Voltage | VIN | 4.5 | 5 | 6 | V | 5 | |
| Regulated Output (Float) Voltage | VFLOAT | 4.158 | 4.2 | 4.242 | V | IBAT=40mA, | 5 |
| Input Voltage to GND | -0.3 | 28 | V | 4 | |||
| BAT Voltage GND | -5 | 15 | V | 4 | |||
| Other pin to GND | -0.3 | 6.5 | V | 4 | |||
| Maximum Soldering Temperature | 260 | ℃ | at leads, 10 sec | 4 | |||
| Operating Junction Temperature Range | TJ | -20 | 85 | ℃ | 4 | ||
| Storage Temperature | -65 | 165 | ℃ | 4 | |||
| IIN Input Supply Current | IIN | 80 | uA | IBAT=4.2V | 5 | ||
| VIN Under Voltage Lockout Threshold | VUV | 3.5 | V | From VIN Low to High | 5 | ||
| Input Voltage OVP | VOVP | 7 | V | VIN Rising | 5 | ||
| OVP Hysteresis | VOVP_HYS | 150 | mV | 5 | |||
| BAT Pin Current (RISET=3.4k) | IBAT | 500 | mA | RISET=3.4k, Current Mode | 5 | ||
| BAT Pin Current (RISET=17k) | IBAT | 100 | mA | RISET=17k, Current Mode | 5 | ||
| BAT Pin Current (VBAT=4.2V) | IBAT | 1 | uA | VBAT=4.2V (VIN=float or 0V) | 5 | ||
| Trickle Charge Current | ITRIKL | 10 | %IBAT | VBAT<VTRIKL, RISET=10k, Current Mode | 5 | ||
| Trickle Charge Threshold Voltage | VTRIKL | 2.6 | V | VBAT Rising | 5 | ||
| Trickle Charge Hysteresis Voltage | VTRHYS | 150 | mV | 5 | |||
| Termination Current Threshold | ITERM | 10 | %IBAT | 5 | |||
| ISET Pin Voltage | VISET | 1 | V | RISET=10k, Current Mode | 5 | ||
| CHRG/FULL Pin Weak Pull-Down Current | ICHRG | 5 | uA | VCHRG=5V | 5 | ||
| CHRG/FULL Pin Output Low Voltage | VCHRG | 0.5 | V | ICHRG=5mA | 5 | ||
| Recharge Battery Threshold Voltage | ΔVRECHRG | 150 | mV | VFLOAT-VRECHRG | 5 | ||
| EN Logic-Low Voltage Threshold | VEN_ON | 0.4 | V | 5 | |||
| EN Logic-High Voltage Threshold | VEN_OFF | 1.4 | V | 5 | |||
| Junction Temperature in Constant Temperature Mode | TLIM | 125 | °C | 5 | |||
| Thermal Resistance (SOT23-6, θJA) | θJA | 200 | ℃/W | 4 | |||
| ESD HBM (Human Body Model) | 2 | KV | Human Body Mode | 4 | |||
| ESD MM (Machine Model) | 200 | V | Machine Mode | 4 |
CAD (KiCad official)
- Symbol:
LP4069B6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lp4069b6f-etched.step/lp4069b6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp4069b6f.step/lp4069b6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (8 pp, sha256
9986abea42da0b2c, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).