Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

S-LMUN5211T1G

LRC · Digital Transistors · SC-70

S-LMUN5211T1G from LRC, in a SC-70. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base terminal of the NPN bias resistor transistor, which has a monolithic bias resistor network with R1 = 10 kΩ and R2 = 10 kΩ.
2 EMITTER passive Emitter terminal of the NPN bias resistor transistor; the device is rated for a collector-emitter voltage VCEO of 50 V and a continuous collector current IC of 100 mA.
3 COLLECTOR passive Collector terminal of the NPN bias resistor transistor; the device is rated for a collector-base voltage VCBO of 50 V and a continuous collector current IC of 100 mA.

Key specifications

Parameter Value
Manufacturer LRC
Package SC-70
Category Transistors/Thyristors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Emitter Breakdown Voltage VBR(CEO) 50 V IC = 2.0 mA, IB = 0 2
Collector-Base Breakdown Voltage VBR(CBO) 50 V IC = 10 μA, IE = 0 2
Collector-Base Cutoff Current ICBO 100 nA VCB = 50 V, IE = 0 2
Collector-Emitter Cutoff Current ICEO 500 nA VCE = 50 V, IB = 0 2
Emitter-Base Cutoff Current IEBO 0.5 mA VEB = 6.0 V, IC = 0 2
DC Current Gain HFE 35 60 220 IC = 5.0 mA, VCE = 10 V 2
Collector-Emitter Saturation Voltage VCE(sat) 0.25 V IC = 10 mA, IB = 0.3 mA 2
Output Voltage(on) VOL 0.2 V VCC = 5.0 V, VB = 2.5 V, RL = 1.0 KΩ 2
Output Voltage(off) VOH 4.9 V VCC = 5.0 V, VB = 0.5 V, RL = 1.0 KΩ 2
Input Voltage(on) VIN(on) 3 V VCE = 0.3 V, IC = 10 mA 2
Input Voltage(off) VIN(off) 0.5 V VCE = 5 V, IC = 100 μA 2
Input Resistor R1 7 10 13 KΩ 2
Resistor Ratio R1/R2 0.8 1 1.2 2
Collector-Emitter Voltage VCEO 50 V Ta = 25ºC 1
Collector-Base Voltage VCBO 50 V Ta = 25ºC 1
Collector Current, Continuous IC 100 mA Ta = 25ºC 1
Input voltage (device marking/resistor table) Vin -10 40 V 1
Total Device Dissipation, FR-5 Board (Note 1) PD 202 mW TA = 25ºC, FR-5 @ Minimum Pad 1
Thermal Resistance, Junction-to-Ambient (Note 1) RΘJA 618 ºC/W FR-5 @ Minimum Pad 1
Junction and Storage temperature TJ,Tstg -55 150 ºC 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: S-LMUN5211T1G
  • Footprint: Package_TO_SOT_SMD:SOT-323_SC-70
  • 3D model: SC-70, generated on the KiCad land (body 1.3 x 2.05 mm, terminals on the pads, 0.95 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: s-lmun5211t1g-etched.step / s-lmun5211t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); s-lmun5211t1g.step / s-lmun5211t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (6 pp, sha256 d8c94146c4c2ede5, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF