Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADM6306D331ARJZ-R7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM6306D331ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active-low, open-drain reset output that asserts when a monitored supply falls below its threshold and remains valid as long as VCC exceeds 0.9 V.
2 GND power_in Ground reference pin for the device.
3 MR input Manual reset input that asserts RESET when driven low, has an internal 63.5 kΩ pull-up (32 kΩ to 100 kΩ range) so it is high when unconnected, and ignores negative transients up to 0.1 µs typical.
4 RST IN input Adjustable reset comparator input with a 1.23 V threshold on this part (ADM6306D331ARJZ-R7) and ±25 nA input leakage; connect it to VCC if unused.
5 VCC power_in Power supply input that is monitored by the ADM6306 against the factory-trimmed 3.08 V reset threshold for this part, with VCC specified up to 5.5 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC operating voltage range VCC1 0.9 5.5 V 0.9 V VCC that guarantees valid output 3
Input current ICC 5 16 µA VCC = 5.5 V, TA = −40°C to +85°C 3
Input current ICC 5 20 µA VCC = 5.5 V, TA = −40°C to +125°C 3
VCC reset threshold (reset threshold number 31) VTH 3.034 3.08 3.126 V TA = 25°C 9
VCC reset threshold (reset threshold number 31) VTH 3.003 3.157 V TA = −40°C to +125°C 9
VCC threshold tolerance (ADM6306) VTH -1 1 % TA = 25°C 3
VCC threshold tolerance (ADM6306) VTH -1.5 1.5 % TA = −40°C to +85°C 3
VCC threshold tolerance (ADM6306) VTH -2.5 2.5 % TA = −40°C to +125°C 3
Reset timeout period (ADM630xD3) tRP 140 200 280 ms TA = −40°C to +125°C 3
Reset output voltage VOL VOL 0.4 V VCC > 4.25 V, ISINK = 3.2 mA 3
Reset output voltage VOL VOL 0.3 V VCC > 2.5 V, ISINK = 1.2 mA 3
MR minimum input pulse width 1 µs TA = 0°C to +70°C 3
MR minimum input pulse width 1.5 µs TA = −40°C to +125°C 3
MR glitch rejection 0.1 µs 3
MR pull-up resistance 32 63.5 100 kΩ 3
RST IN input threshold (1.23 V option) VRSTH 1.22 1.23 1.24 V TA = 25°C 3
RST IN input threshold (1.23 V option) VRSTH 1.211 1.23 1.249 V TA = −40°C to +85°C 3
RST IN input threshold (1.23 V option) VRSTH 1.2 1.26 V TA = −40°C to +125°C 3
RST IN input current IRST INx -25 25 nA 0 V < VRST IN < VCC, 0.3 V, TA = −40°C to +85°C 3
VCC VCC -0.3 6 V 4
Input/output current 20 mA 4
Rate of rise, VCC 100 V/µs 4
Storage temperature range -65 160 °C 4
Operating temperature range -40 125 °C 4
Lead temperature 300 °C 10 sec 4
Junction temperature 150 °C 4
Thermal resistance, junction-to-ambient (5-lead SOT-23) θJA 240 °C/W 5-lead SOT-23 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM6306D331ARJZ-R7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm6306d331arjz-r7-etched.step / adm6306d331arjz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm6306d331arjz-r7.step / adm6306d331arjz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 1b87ea4aa8571382, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF