3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA293B3IDBVR
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA293B3IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage pin; the absolute maximum output range is GND - 0.3 V to Vs + 0.3 V. |
| 2 | GND | power_in | Ground reference pin; the zero-current output sits at a maximum of GND + 20 mV. |
| 3 | Vs | power_in | Power supply pin; the operating supply range is 2.7 V to 20 V, with an absolute maximum of -0.3 V to 22 V. |
| 4 | IN+ | input | Positive shunt resistor sense input; the common-mode range is -4 V to 110 V, with absolute maximum common-mode limits of -20 V to 120 V. |
| 5 | IN- | input | Negative shunt resistor sense input; the common-mode voltage at both IN+ and IN- must stay within -4 V to 110 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vs | -0.3 | 22 | V | 4 | ||
| Analog inputs differential voltage | VIN+, VIN- | -12 | 12 | V | Differential (VIN+), (VIN-), All others | 4 | |
| Analog inputs common-mode voltage | VIN+, VIN- | -20 | 120 | V | Common - mode | 4 | |
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | -4 | 48 | 110 | V | 5 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 5 | |
| Differential sense input range | VSENSE | 0 | V | 5 | |||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Common-mode input range | VCM | -4 | 110 | V | TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio, input referred | CMRR | 140 | 160 | dB | -4 V ≤ VCM ≤ 110 V, TA = -40°C to +125°C | 5 | |
| Offset voltage, input referred (INA293x3) | Vos | -50 | 10 | 50 | µV | INA293x3 | 5 |
| Offset voltage drift (INA293x1, x2, x3) | dVos/dT | -0.5 | 0.05 | 0.5 | µV/℃ | TA = -40℃ to +125℃, INA293x1, INA293x2, INA293x3 | 5 |
| Power supply rejection ratio, input referred (INA293x2, x3) | PSRR | -3 | 0.3 | 3 | µV/V | INA293x2, INA293x3, 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C | 5 |
| Input bias current IB+ | IB+ | 10 | 20 | 30 | uA | IB+, VSENSE = 0 V | 5 |
| Input bias current IB- | IB- | 10 | 20 | 30 | uA | IB-, VSENSE = 0 V | 5 |
| Gain error | GERR | -0.15 | 0.02 | 0.15 | % | GND + 50 mV ≤ VOUT ≤ VS, 200 mV | 6 |
| Gain drift | GERR | -10 | 1 | 10 | ppm/°C | TA = -40°C to +125°C | 6 |
| Maximum capacitive load | 500 | pF | No sustained oscillations, no isolation resistor | 6 | |||
| Swing to ground | 0.005 | 0.02 | V | RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40°C to +125°C | 6 | ||
| Supply voltage | Vs | 2.7 | 20 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 1.5 | 2 | mA | 6 | ||
| Quiescent current over temperature | IQ | 2.25 | mA | TA = -40°C to +125°C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 184.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 105.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 47.2 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ΨJT | 21.5 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ΨJB | 46.9 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
INA293B3IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina293b3idbvr-etched.step/ina293b3idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina293b3idbvr.step/ina293b3idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
48c5dc22a03325c7, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).