3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM4128AQ1MF4.1
Texas Instruments · Voltage References · SOT-23-5
LM4128AQ1MF4.1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin; leave floating. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Enable pin; the datasheet gives a maximum low input level of 35 %V and a minimum high input level of 65 %V, and with EN = 0 V the supply current in shutdown is 3 µA typical (7 µA max). |
| 4 | VIN | power_in | Input supply pin; maximum input supply voltage is 5.5 V and the reference requires VIN of VREF + 400 mV to 5.5 V at 10 mA load. |
| 5 | VREF | power_out | Voltage reference output, which supplies loads up to 20 mA maximum load current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Initial Accuracy (A Grade, LM4128A-4.1) | VREF | -0.1 | 0.1 | % | 8 | ||
| Temperature Coefficient (LM4128A-4.1) | TCVREF / °C | 75 | ppm / °C | 8 | |||
| Supply Current | IQ | 60 | 100 | µA | VIN = 5V, ILOAD = 0A | 8 | |
| Supply Current in Shutdown | IQ_SD | 3 | 7 | µA | EN = 0V | 8 | |
| Load Regulation | ΔVREF/ΔILOAD | 25 | 120 | ppm / mA | 0 mA ≤ ILOAD ≤ 20 mA | 8 | |
| Dropout Voltage | VIN - VREF | 175 | 400 | mV | ILOAD = 10 mA | 8 | |
| Enable Pin Maximum Low Input Level | VIL | 35 | %V | 8 | |||
| Enable Pin Minimum High Input Level | VIH | 65 | %V | 8 | |||
| Maximum Input Supply Voltage | 5.5 | V | 2 | ||||
| Maximum Load Current | 20 | mA | 2 | ||||
| Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Maximum Voltage on any input | -0.3 | 6 | V | 2 | |||
| Power Dissipation | 350 | mW | TA = 25°C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature Soldering | 260 | °C | 10 s | 2 | |||
| Lead Temperature Vapor Phase | 215 | °C | 60 s | 2 | |||
| Lead Temperature Infrared | 220 | °C | 15 s | 2 | |||
| ESD Susceptibility Human Body Model | 2 | kV | Human body model, 100 pF through 1.5 kΩ | 2 | |||
| Junction-to-Ambient Thermal Resistance (SOT-23) | θJ-A | 220 | °C/W | SOT-23 package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Susceptibility(3) Human Body Model 2 kV (1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM4128AQ1MF4.1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm4128aq1mf4-1-etched.step/lm4128aq1mf4-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm4128aq1mf4-1.step/lm4128aq1mf4-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
dba8a4a80be91bcb, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).