component
LT6654BIS6-2.5#TRMPBF
Public Made by Adomby adom
Analog Devices Voltage References, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT6654BIS6-2.5#TRMPBF
Analog Devices · Voltage References · TSOT-23-6
LT6654BIS6-2.5#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Internal-function ground pin that must be tied to ground near Pin 2. |
| 2 | GND | power_in | Primary device ground. |
| 3 | DNC | unconnected | Do Not Connect; connected internally, and leakage current from this pin to VIN or GND should be kept to a minimum. |
| 4 | VIN | power_in | Power supply input, to be bypassed with a 0.1µF capacitor to ground; operates up to 36V (absolute maximum 38V). |
| 5 | DNC | unconnected | Do Not Connect; connected internally, and leakage current from this pin to VIN or GND should be kept to a minimum. |
| 6 | VOUT | power_out | Output voltage pin; an output capacitor of 1µF minimum is required for stable operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (LT6654B) | -0.1 | 0.1 | % | LT6654B, TA=25°C | 6 | ||
| Output Voltage Accuracy (LT6654BI) | -0.35 | 0.35 | % | LT6654BI, full operating temperature range | 6 | ||
| Output Voltage Temperature Coefficient | 10 | 20 | ppm/°C | LT6654B (Note 3) | 6 | ||
| Line Regulation (25°C) | 1.2 | 5 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 36V, LT6654-2.5 | 6 | ||
| Line Regulation (full temp) | 10 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 36V, LT6654-2.5, full temperature range | 6 | |||
| Load Regulation Sourcing (25°C) | 3 | 8 | ppm/mA | IOUT(SOURCE) = 10mA, LT6654-2.5 | 6 | ||
| Load Regulation Sourcing (full temp) | 15 | ppm/mA | IOUT(SOURCE) = 10mA, LT6654-2.5, full temperature range | 6 | |||
| Load Regulation Sinking (25°C) | 9 | 20 | ppm/mA | IOUT(SINK) = 10mA, LT6654-2.5 | 6 | ||
| Load Regulation Sinking (full temp) | 30 | ppm/mA | IOUT(SINK) = 10mA, LT6654-2.5, full temperature range | 6 | |||
| Dropout Voltage | VIN, VOUT | 55 | 100 | mV | ΔVOUT = 0.1%, IOUT = 0mA, full temperature range | 6 | |
| Supply Current | IQ | 350 | 600 | µA | No Load; max over full temperature range | 6 | |
| Output Short-Circuit Current to GND | 40 | mA | Short VOUT to GND | 6 | |||
| Output Short-Circuit Current to VIN | 30 | mA | Short VOUT to VIN | 6 | |||
| Output Voltage Noise 0.1Hz to 10Hz | 1.5 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz, LT6654-2.5 | 6 | |||
| Output Voltage Noise 10Hz to 1kHz | 2 | ppmRMS | 10Hz ≤ f ≤ 1kHz | 6 | |||
| Turn-On Time | 150 | µs | 0.1% Settling, CLOAD = 1µF | 7 | |||
| Long-Term Drift of Output Voltage | 60 | ppm/√kHr | LT6654S6 (Note 7) | 7 | |||
| Hysteresis S6 | 30 | ppm | S6, ΔT = -40°C to 85°C | 7 | |||
| Hysteresis S6 | 15 | ppm | S6, ΔT = 0°C to 70°C | 7 | |||
| Input Voltage | VIN | -0.3 | 38 | V | VIN to GND | 2 | |
| Output Voltage | VOUT | -0.3 | V | -0.3V to VIN + 0.3V | 2 | ||
| Operating Temperature Range | -55 | 125 | °C | 2 | |||
| Specified Temperature Range (I-Grade) | -40 | 85 | °C | I-Grade | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | Note 2 | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | S6 package | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 192 | °C/W | S6 package, 6-lead TSOT-23 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | Plastic mould compounds absorb water. With changes in | 18 |
CAD (KiCad official)
- Symbol:
LT6654BIS6-2.5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lt6654bis6-2-5-trmpbf-etched.step/lt6654bis6-2-5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6654bis6-2-5-trmpbf.step/lt6654bis6-2-5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
7793895f1475d122, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).