component
FU6831L
Public Made by Adomby adom
Fortior Tech Fortior Technol, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFU6831L
Fortior Tech · Fortior Technol · LQFP-48(7x7)
FU6831L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.2/C2M/A2M | bidirectional | GPIO P2.2 with optional INT1 interrupt input and optional 4.7K pull-up; also the differential Hall2/BEMF2 negative input and AMP2 negative input. |
| 2 | P2.3/AD1/A2O | bidirectional | GPIO P2.3 with optional INT1 interrupt input; ADC channel 1 input for the phase-current 2 amplified signal and AMP2 output. |
| 3 | P2.4/AD2 | bidirectional | GPIO P2.4 with optional INT1 interrupt input; ADC channel 2 input for the bus voltage signal. |
| 4 | P2.5/AD3 | bidirectional | GPIO P2.5 with optional INT1 interrupt input; ADC channel 3 input. |
| 5 | P2.6/C3M | bidirectional | GPIO P2.6 with optional INT1 interrupt input; overcurrent reference input, negative input of CMP3. |
| 6 | P2.7/AD4/C3P/A0O | bidirectional | GPIO P2.7 with optional INT1 interrupt input; ADC channel 4 input for the amplified bus current, positive input of CMP3 for overcurrent detection, and AMP0 output. |
| 7 | P3.0/A0M | bidirectional | GPIO P3.0; AMP0 negative input for amplifying the bus current signal. |
| 8 | P3.1/A0P | bidirectional | GPIO P3.1; AMP0 positive input for amplifying the bus current signal. |
| 9 | P3.2/AD5/TIM0/VHALF | bidirectional | GPIO P3.2; over-temperature signal input, ADC channel 5 input, advanced timer channel 4 output, and 1/2 VDD5 or 1/2 VREF reference output requiring an external 1μF capacitor. |
| 10 | P3.3/AD6/RXD2/IR_RXD2 | bidirectional | GPIO P3.3; ADC channel 6 input, UART2 receive and IR receive when function is transferred. |
| 11 | P3.4/AD7/TXD2/IR_TXD2 | bidirectional | GPIO P3.4; analog speed control input on ADC channel 7, UART2 transmit and IR transmit when function is transferred. |
| 12 | P3.5/VREF | bidirectional | GPIO P3.5; ADC external reference voltage input or internal VREF output, requiring an external 1μF capacitor. |
| 13 | AVSS | power_in | Analog ground. |
| 14 | AVDD5 | power_in | Analog power input, connected externally to VDD5, with a 1μF capacitor to AVSS. |
| 15 | P3.6/XIN/ECLK | bidirectional | GPIO P3.6; fast clock crystal input for a 24MHz crystal or external fast clock input. |
| 16 | P3.7/XOUT | bidirectional | GPIO P3.7; fast clock crystal output for a 24MHz crystal. |
| 17 | P0.0/SDA | bidirectional | GPIO P0.0 with optional INT0 interrupt input; I2C SDA open-drain output with optional 4.7K pull-up. |
| 18 | P0.1/SCL/TIM4 | bidirectional | GPIO P0.1; I2C SCL clock open-drain output with optional 4.7K pull-up, and Timer4 input or output. |
| 19 | P0.2/LXIN | bidirectional | GPIO P0.2; 32768Hz crystal input. |
| 20 | P0.3/LXOUT | bidirectional | GPIO P0.3; 32768Hz crystal output. |
| 21 | P0.4/NSS | bidirectional | GPIO P0.4; SPI slave select port. |
| 22 | P0.5/MOSI/TXD/IR_TXD | bidirectional | GPIO P0.5; SPI MOSI (master output or slave input), with UART1 transmit and IR transmit when function is transferred. |
| 23 | P0.6/MISO/RXD/IR_RXD | bidirectional | GPIO P0.6; SPI MISO (master input or slave output), with UART1 receive and IR receive when function is transferred. |
| 24 | P0.7/SCLK/TIM5/CXO | bidirectional | GPIO P0.7; SPI clock, Timer5 capture input or PWM output, and comparator output test pin. |
| 25 | P1.0/TIM2 | bidirectional | GPIO P1.0 with optional INT1 interrupt input; Timer2 capture input or PWM output. |
| 26 | P1.1/TIM3 | bidirectional | GPIO P1.1 with optional INT1 interrupt input; Timer3 capture input or PWM output. |
| 27 | NC | unconnected | No connection pin as listed in the FU6831L LQFP48 pin table. |
| 28 | H_PU | output | 3P3N mode Predriver high-side U-phase voltage output with internal 47K pull-up. |
| 29 | H_PV | output | 3P3N mode Predriver high-side V-phase voltage output with internal 47K pull-up. |
| 30 | H_PW | output | 3P3N mode Predriver high-side W-phase voltage output with internal 47K pull-up. |
| 31 | L_U | output | 3P3N mode Predriver low-side U-phase voltage output with internal 47K pull-down. |
| 32 | L_V | output | 3P3N mode Predriver low-side V-phase voltage output with internal 47K pull-down. |
| 33 | L_W | output | 3P3N mode Predriver low-side W-phase voltage output with internal 47K pull-down. |
| 34 | VBB | power_out | 10V LDO output for the predriver, requiring an external 1μF to 4.7μF capacitor. |
| 35 | VCC | power_in | Power input: 5V to 24V in single-supply high-voltage mode (VCC_MODE=0), or 5V to 36V in dual-supply mode (VCC_MODE=1); requires 10μF or larger filter capacitor. |
| 36 | VSS | power_in | Digital ground. |
| 37 | VDD5 | power_in | Medium-voltage power input or internal 5V LDO output, depending on VCC_MODE; requires an external 1μF to 4.7μF capacitor. |
| 38 | VCC_MODE | input | Power mode control input selecting single-supply high-voltage or dual-supply operation as described for the VCC pin. |
| 39 | RSTN/FICEK | input | External reset input with internal pull-up; also the FICE debug interface clock. |
| 40 | VDD18 | power_out | 1.85V LDO output, requiring an external 1μF to 4.7μF capacitor. |
| 41 | P1.2/FICED | bidirectional | GPIO P1.2 with optional INT1 interrupt input; FICE debug interface data port. |
| 42 | P1.3/HBIAS/A3O | bidirectional | GPIO P1.3; Hall bias supply switched internally from VDD5 for high-current output, and AMP3 output. |
| 43 | P1.4/C0P/A3M | bidirectional | GPIO P1.4 with optional INT1 interrupt input and optional 4.7K pull-up; differential Hall0/BEMF0 positive input, Timer1 switch Hall0 input, and AMP3 negative input. |
| 44 | P1.5/C0M/A3P | bidirectional | GPIO P1.5 with optional INT1 interrupt input and optional 4.7K pull-up; differential Hall0/BEMF0 negative input and AMP3 positive input. |
| 45 | P1.6/C1P/A1P | bidirectional | GPIO P1.6 with optional INT1 interrupt input and optional 4.7K pull-up; differential Hall1/BEMF1 positive input, Timer1 switch Hall1 input, and AMP1 positive input for phase-current 1. |
| 46 | P1.7/C1M/A1M | bidirectional | GPIO P1.7 with optional 4.7K pull-up; differential Hall1/BEMF1 negative input and AMP1 negative input. |
| 47 | P2.0/AD0/A1O | bidirectional | GPIO P2.0 with optional INT1 interrupt input; ADC channel 0 input for the amplified phase-current 1 signal and AMP1 output. |
| 48 | P2.1/C2P/A2P | bidirectional | GPIO P2.1 with optional INT1 interrupt input and optional 4.7K pull-up; differential Hall2/BEMF2 positive input, Timer1 switch Hall2 input, and AMP2 positive input for phase-current 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
FU6831L - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6831l-etched.step/fu6831l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6831l.step/fu6831l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (292 pp, sha256
d5a21e4e7fe9a48c, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).