component
SL8088AAC
Public Made by Adomby adom
Slkor SLKORMICRO Elec DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL8088AAC
Slkor SLKORMICRO Elec · DC-DC Converters · SOT-23-5
SL8088AAC from Slkor SLKORMICRO Elec, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Chip enable pin: drive EN above 1.2V to turn the part on and below 0.6V to turn it off, and do not leave it floating. |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | SW | output | Power switch output connected to the inductor, tied to the drains of the internal P-ch and N-ch MOSFET switches. |
| 4 | IN | power_in | Power supply input (2.5V to 5.5V per the recommended operating range), which must be closely decoupled to GND with a 10µF or greater ceramic capacitor. |
| 5 | FB | input | Output voltage feedback pin; an internal resistive divider scales the output voltage down for comparison to the 0.6V internal reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage | VIN | -0.3 | 6 | V | 3 | ||
| EN voltage | VEN | -0.3 | 6 | V | 3 | ||
| SW voltage | VSW | -0.3 | V | Printed max is VIN+0.3V; not expressible as a number | 3 | ||
| SW voltage (10ns transient) | VSW | -5 | 8 | V | 10ns transient | 3 | |
| FB voltage | VFB | -0.3 | 6 | V | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10sec. | 3 | |||
| ESD Human Body Model (HBM) | V(ESD-HBM) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001-2014, Class 2 | 3 | |
| ESD Charged Device Mode (CDM) | V(ESD-CDM) | -200 | 200 | V | ANSI/ESDA/JEDEC JS-002-2014, Class C0b | 3 | |
| Latch-up current | ILATCH-UP | -150 | 150 | mA | JEDEC STANDARD NO.78E | 3 | |
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 3 | ||
| Operating temperature range | TA | -40 | 85 | °C | 3 | ||
| Input voltage | VIN | 2.5 | 5.5 | V | 3 | ||
| Output current | 0 | 1 | A | 3 | |||
| Input Voltage Range | 2.5 | 5.5 | V | 4 | |||
| Supply Current (Quiescent) | IQ | 40 | 80 | µA | VEN =3.0V | 4 | |
| Supply Current (Shutdown) | ISHUTDOWN | 0.1 | 1 | µA | VEN =0 or EN = GND | 4 | |
| Feedback Voltage | VFB | 0.585 | 0.6 | 0.615 | V | 4 | |
| Over Voltage Protection Threshold | VOVP | 6.1 | 6.3 | 6.5 | V | 4 | |
| Wake up VIN Under-Voltage Lockout Threshold Voltage | VUVLO | 2.3 | 2.45 | V | 4 | ||
| Shutdown VIN Voltage | 1.75 | 1.9 | V | 4 | |||
| High-Side Switch On-Resistance | RDS(ON)_HS | 300 | mΩ | ISW=100mA | 4 | ||
| Low-Side Switch On-Resistance | RDS(ON)_LS | 200 | mΩ | ISW=-100mA | 4 | ||
| Upper Switch Current Limit | 1.5 | A | 4 | ||||
| Switching Frequency | fSW | 1.5 | MHz | 4 | |||
| EN Rising Threshold | VEN_RISING | 1.2 | V | 4 | |||
| EN Falling Threshold | VEN_FALLING | 0.6 | V | 4 | |||
| EN Threshold Hysteresis | 100 | mV | 4 | ||||
| Hysteresis VIN voltage | 400 | mV | 4 | ||||
| Soft Start | 1 | mS | 4 | ||||
| Thermal Shutdown | 160 | ℃ | 4 | ||||
| Thermal Hysteresis | 30 | ℃ | 4 | ||||
| Junction-to-ambient thermal resistance | RθJA | 180 | °C/W | JESD 51-7, 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 130 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 45 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 35 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 45 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
SL8088AAC - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sl8088aac-etched.step/sl8088aac-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl8088aac.step/sl8088aac.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (13 pp, sha256
b39533057ced4c26, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).