Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS62170QDSGRQ1

Texas Instruments · Global Sourcing Parts · WSON-8-EP(2x2)

TPS62170QDSGRQ1 from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground return path.
2 VIN power_in Supply voltage input with operating range from 3V to 17V.
3 EN input Enable input; High state enables device operation, Low state disables; internal pull-down resistor of approximately 400 kΩ.
4 AGND power_in Analog ground return path for control circuitry.
5 FB input Voltage feedback input for adjustable versions regulated to 0.8V; use external resistive divider with minimum cross current of 2 µA to set VOUT between 0.9V and 6V.
6 VOS input Output voltage sense input for control loop compensation; must connect with shortest path to VOUT at output capacitor to minimize noise coupling.
7 SW output Switch node connected to internal high-side and low-side MOSFET switches; connect external inductor between SW and output capacitor.
8 PG tri_state Output power good signal; High indicates regulated output voltage ready, Low indicates output voltage below regulation; open-drain output requiring external pull-up resistor with high impedance during device shutdown.
9 Exposed Thermal Pad power_in Exposed thermal pad electrically connected to AGND; must be soldered to PCB for proper thermal dissipation and mechanical reliability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Global Sourcing Parts
Pins 9

CAD (KiCad official)

  • Symbol: TPS62170QDSGRQ1
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps62170qdsgrq1-etched.step / tps62170qdsgrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62170qdsgrq1.step / tps62170qdsgrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 3f9b42d19d45696e, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF