component
STM32H7B3ZIT6Q
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32H7B3ZIT6Q
STMicroelectronics · ST Microelectronics · LQFP-144(20x20)
STM32H7B3ZIT6Q from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5-V tolerant I/O (FT_h2, high-speed low-voltage option mainly for FMC) with alternate functions TRACECLK, SAI1_CK1, SPI4_SCK, SAI1_MCLK_A, OCTOSPIM_P1_IO2, USART10_RX, FMC_A23 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX, FMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TRACED1, SAI1_D2, DFSDM1_DATIN3, TIM15_CH1N, SPI4_SS, SAI1_FS_A, FMC_A20, DCMI_D4/PSSI_D4 and LCD_B0. |
| 4 | PE5 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TRACED2, SAI1_CK2, DFSDM1_CKIN3, TIM15_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6/PSSI_D6 and LCD_G0. |
| 5 | PE6 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCK_B, FMC_A22, DCMI_D7/PSSI_D7 and LCD_G1. |
| 6 | VSS | power_in | Ground pin. |
| 7 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 8 | VBAT | power_in | Backup-domain supply, 1.2 V to 3.6 V, supplying RTC, LSE and backup SRAM. |
| 9 | PC13 | bidirectional | 5-V tolerant I/O with tamper inputs/outputs (TAMP_IN1, TAMP_OUT2, TAMP_OUT3), RTC_OUT1/RTC_TS and WKUP3 functions. |
| 10 | PC14-OSC32_IN | bidirectional | 5-V tolerant I/O that is also the LSE oscillator input OSC32_IN. |
| 11 | PC15-OSC32_OUT | bidirectional | 5-V tolerant I/O that is also the LSE oscillator output OSC32_OUT. |
| 12 | VSS | power_in | Ground pin. |
| 13 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 14 | VSSSMPS | power_in | Ground pin of the internal SMPS step-down converter. |
| 15 | VLXSMPS | power_out | SMPS step-down converter switching output connected to the external inductor. |
| 16 | VDDSMPS | power_in | Supply of the internal SMPS step-down converter, 1.62 V to 3.6 V, with VDDSMPS = VDD (Table 22). |
| 17 | VFBSMPS | input | SMPS step-down converter feedback input. |
| 18 | VSS | power_in | Ground pin. |
| 19 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 20 | PF6 | bidirectional | 5-V tolerant I/O (FT_h1, high-speed low-voltage option for OCTOSPI) with alternate functions TIM16_CH1, SPI5_SS, SAI1_SD_B, UART7_Rx, OCTOSPIM_P1_IO3 and EVENTOUT. |
| 21 | PF7 | bidirectional | 5-V tolerant I/O (FT_h1) with alternate functions TIM17_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, OCTOSPIM_P1_IO2 and EVENTOUT. |
| 22 | PF8 | bidirectional | 5-V tolerant I/O (FT_h1) with alternate functions TIM16_CH1N, SPI5_MISO, SAI1_SCK_B, UART7_RTS, TIM13_CH1, OCTOSPIM_P1_IO0 and EVENTOUT. |
| 23 | PF9 | bidirectional | 5-V tolerant I/O (FT_h1) with alternate functions TIM17_CH1N, SPI5_MOSI, SAI1_FS_B, UART7_CTS, TIM14_CH1, OCTOSPIM_P1_IO1 and EVENTOUT. |
| 24 | PF10 | bidirectional | 5-V tolerant I/O (FT_h1) with alternate functions TIM16_BKIN, SAI1_D3, PSSI_D15, OCTOSPIM_P1_CLK, DCMI_D11/PSSI_D11 and LCD_DE. |
| 25 | PH0-OSC_IN | bidirectional | 5-V tolerant I/O that is also the HSE oscillator input OSC_IN. |
| 26 | PH1-OSC_OUT | bidirectional | 5-V tolerant I/O that is also the HSE oscillator output OSC_OUT. |
| 27 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 28 | PC0 | bidirectional | Analog-option 5-V tolerant I/O (FT_a, analog supplied by VDDA) with ADC12_INP10 and alternate functions including DFSDM1_CKIN0, SAI2_FS_B, FMC_A25, OTG_HS_ULPI_STP and LCD_G2. |
| 29 | PC1 | bidirectional | I/O (FT_ah0, analog option supplied by VDDA) with ADC12_INP11, ADC12_INN10, TAMP_IN3 and WKUP6 functions, plus alternate functions such as TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO and SDMMC2_CK. |
| 30 | PC2_C | passive | Analog-switch pad (Pxy_C) with a direct path to pin PC2 through an analog switch; it is 3.3-V tolerant (TT_a) and provides ADC2_INP0 and ADC2_INN1. |
| 31 | PC3_C | passive | Analog-switch pad (Pxy_C) with a direct path to pin PC3 through an analog switch; it is 3.3-V tolerant (TT_a) and provides ADC2_INP1. |
| 32 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 33 | VSS | power_in | Ground pin. |
| 34 | VSSA | power_in | Analog ground pin for ADC, DAC, OPAMP, COMP and VREFBUF. |
| 35 | VREF+ | power_in | Positive reference voltage input for the ADC/DAC, limited to -0.3 V to 4.0 V (Table 19). |
| 36 | VDDA | power_in | Analog supply: 1.62 V minimum when ADC or COMP is used, 1.8 V for DAC, 2.0 V for OPAMP, 3.6 V maximum. |
| 37 | PA0 | bidirectional | Analog-option 5-V tolerant I/O (FT_a) with ADC1_INP16 and WKUP1, plus alternate functions such as TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, SPI6_SS/I2S6_WS, USART2_CTS/USART2_NSS and SDMMC2_CMD. |
| 38 | PA1 | bidirectional | Analog-option 5-V tolerant I/O (FT_ah1) with ADC1_INP17 and ADC1_INN16, plus alternate functions such as TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX and OCTOSPIM_P1_IO3. |
| 39 | PA2 | bidirectional | Analog-option 5-V tolerant I/O (FT_a) with ADC1_INP14 and WKUP2, plus alternate functions such as TIM2_CH3, TIM5_CH3, TIM15_CH1, DFSDM2_CKIN1, USART2_TX and MDIOS_MDIO. |
| 40 | PA3 | bidirectional | Analog-option 5-V tolerant I/O (FT_ah1) with ADC1_INP15, plus alternate functions such as TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, I2S6_MCK, USART2_RX and OTG_HS_ULPI_D0. |
| 41 | VSS | power_in | Ground pin. |
| 42 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 43 | PA4 | bidirectional | 3.3-V tolerant I/O (TT_a) with ADC1_INP18 and DAC1_OUT1, plus alternate functions such as TIM5_ETR, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, USART2_CK and DCMI_HSYNC/PSSI_DE. |
| 44 | PA5 | bidirectional | 3.3-V tolerant I/O (TT_ah0) with ADC1_INP19, ADC1_INN18 and DAC1_OUT2, plus alternate functions such as PWR_NDSTOP2, TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK; its injected current is limited to -0/0 mA (Table 20). |
| 45 | PA6 | bidirectional | 3.3-V tolerant I/O (TT_ah1) with ADC12_INP3 and DAC2_OUT1, plus alternate functions such as TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, OCTOSPIM_P1_IO3, TIM13_CH1 and DCMI_PIXCLK/PSSI_PDCK. |
| 46 | PA7 | bidirectional | 5-V tolerant analog-option I/O (FT_ah1) with ADC12_INP7, ADC12_INN3 and OPAMP1_VINM, plus alternate functions such as TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO, TIM14_CH1, OCTOSPIM_P1_IO2 and FMC_SDNWE. |
| 47 | PC4 | bidirectional | 5-V tolerant analog-option I/O (FT_a) with ADC12_INP4, OPAMP1_VOUT and COMP1_INM, plus alternate functions such as DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2 and FMC_SDNE0. |
| 48 | PC5 | bidirectional | 5-V tolerant analog-option I/O (FT_ah1) with ADC12_INP8, ADC12_INN4 and OPAMP1_VINM, plus alternate functions such as SAI1_D3, DFSDM1_DATIN2, COMP1_OUT and FMC_SDCKE0. |
| 49 | PB0 | bidirectional | 5-V tolerant analog-option I/O (FT_ah0) with ADC12_INP9, ADC12_INN5, OPAMP1_VINP and COMP1_INP, plus alternate functions such as TIM1_CH2N, TIM3_CH3, UART4_CTS, OTG_HS_ULPI_D1 and OCTOSPIM_P1_IO1. |
| 50 | PB1 | bidirectional | 5-V tolerant analog-option I/O (FT_ah0) with ADC12_INP5 and COMP1_INM, plus alternate functions such as TIM1_CH3N, TIM3_CH4, DFSDM1_DATIN1, OTG_HS_ULPI_D2 and OCTOSPIM_P1_IO0. |
| 51 | PB2 | bidirectional | 5-V tolerant analog-option I/O (FT_ah1) with COMP1_INP, plus alternate functions such as RTC_OUT2, SAI1_D1, DFSDM1_CKIN1, SPI3_MOSI/I2S3_SDO and OCTOSPIM_P1_CLK. |
| 52 | PF11 | bidirectional | 5-V tolerant analog-option I/O (FT_ah1) with ADC1_INP2, plus alternate functions such as SPI5_MOSI, OCTOSPIM_P1_NCLK, SAI2_SD_B, FMC_SDNRAS and DCMI_D12/PSSI_D12. |
| 53 | PF14 | bidirectional | 5-V tolerant I/O (FT_fah2, I2C FM+ and analog options) with ADC2_INP6 and ADC2_INN2, plus alternate functions DFSDM1_CKIN6, I2C4_SCL and FMC_A8. |
| 54 | PF15 | bidirectional | 5-V tolerant I/O (FT_fh2, I2C FM+ option) with alternate functions I2C4_SDA, FMC_A9 and EVENTOUT. |
| 55 | VSS | power_in | Ground pin. |
| 56 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 57 | PE7 | bidirectional | 5-V tolerant analog-option I/O (FT_ah2) with OPAMP2_VOUT and COMP2_INM, plus alternate functions such as TIM1_ETR, DFSDM1_DATIN2, UART7_Rx, OCTOSPIM_P1_IO4 and FMC_D4/FMC_DA4. |
| 58 | PE8 | bidirectional | 5-V tolerant analog-option I/O (FT_ah2) with OPAMP2_VINM, plus alternate functions such as TIM1_CH1N, DFSDM1_CKIN2, UART7_Tx, OCTOSPIM_P1_IO5, FMC_D5/FMC_DA5 and COMP2_OUT. |
| 59 | PE9 | bidirectional | 5-V tolerant analog-option I/O (FT_ah2) with OPAMP2_VINP and COMP2_INP, plus alternate functions such as TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, OCTOSPIM_P1_IO6 and FMC_D6/FMC_DA6. |
| 60 | PE10 | bidirectional | 5-V tolerant analog-option I/O (FT_ah2) with COMP2_INM, plus alternate functions such as TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, OCTOSPIM_P1_IO7 and FMC_D7/FMC_DA7. |
| 61 | PE11 | bidirectional | 5-V tolerant analog-option I/O (FT_ah2) with COMP2_INP, plus alternate functions such as TIM1_CH2, DFSDM1_CKIN4, SPI4_SS, SAI2_SD_B, OCTOSPIM_P1_NCS, FMC_D8/FMC_DA8 and LCD_G3. |
| 62 | PE12 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9/FMC_DA9, COMP1_OUT and LCD_B4. |
| 63 | PE13 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10/FMC_DA10, COMP2_OUT and LCD_DE. |
| 64 | PE14 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11/FMC_DA11 and LCD_CLK. |
| 65 | PE15 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM1_BKIN, USART10_CK, FMC_D12/FMC_DA12, TIM1_BKIN_COMP12 and LCD_R7. |
| 66 | PB10 | bidirectional | 5-V tolerant I/O (FT_f, I2C FM+ option) with alternate functions TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OTG_HS_ULPI_D3 and LCD_G4. |
| 67 | PB11 | bidirectional | 5-V tolerant I/O (FT_f, I2C FM+ option) with alternate functions TIM2_CH4, LPTIM2_ETR, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4 and LCD_G5. |
| 68 | VCAP | power_out | Internal voltage regulator output that must be connected to the external VCAP decoupling capacitor. |
| 69 | VSS | power_in | Ground pin. |
| 70 | VDDLDO | power_in | Supply of the internal LDO regulator, VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 22). |
| 71 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 72 | PB12 | bidirectional | High-speed low-voltage I/O (FT_h1) with alternate functions TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_SS/I2S2_WS, DFSDM1_DATIN1, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and UART5_RX. |
| 73 | PB13 | bidirectional | High-speed low-voltage I/O (FT_h0, SDMMC2 VDDMMC rail) with alternate functions TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0 and UART5_TX. |
| 74 | PB14 | bidirectional | High-speed low-voltage I/O (FT_h0) with alternate functions TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, DFSDM1_DATIN2, USART3_RTS, SDMMC2_D0 and LCD_CLK. |
| 75 | PB15 | bidirectional | High-speed low-voltage I/O (FT_h0) with alternate functions RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, DFSDM1_CKIN2, SDMMC2_D1 and LCD_G7. |
| 76 | PD8 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h2) with alternate functions DFSDM1_CKIN3, USART3_TX, SPDIFRX1_IN1 and FMC_D13/FMC_DA13. |
| 77 | PD9 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions DFSDM1_DATIN3, USART3_RX and FMC_D14/FMC_DA14. |
| 78 | PD10 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions DFSDM1_CKOUT, DFSDM2_CKOUT, USART3_CK, FMC_D15/FMC_DA15 and LCD_B3. |
| 79 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 80 | VSS | power_in | Ground pin. |
| 81 | PD11 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS, OCTOSPIM_P1_IO0, SAI2_SD_A and FMC_A16/FMC_CLE. |
| 82 | PD12 | bidirectional | 5-V tolerant I/O (FT_fh2, I2C FM+ option) with alternate functions LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, USART3_RTS, OCTOSPIM_P1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE and DCMI_D12/PSSI_D12. |
| 83 | PD13 | bidirectional | 5-V tolerant I/O (FT_fh2, I2C FM+ option) with alternate functions LPTIM1_OUT, TIM4_CH2, I2C4_SDA, OCTOSPIM_P1_IO3, SAI2_SCK_A, UART9_RTS, FMC_A18 and DCMI_D13/PSSI_D13. |
| 84 | PD14 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_DA0. |
| 85 | PD15 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_DA1. |
| 86 | PG6 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM17_BKIN, OCTOSPIM_P1_NCS, FMC_NE3, DCMI_D12/PSSI_D12 and LCD_R7. |
| 87 | PG7 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions SAI1_MCLK_A, USART6_CK, OCTOSPIM_P2_DQS, FMC_INT, DCMI_D13/PSSI_D13 and LCD_CLK. |
| 88 | PG8 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions TIM8_ETR, SPI6_SS/I2S6_WS, USART6_RTS, SPDIFRX1_IN2, FMC_SDCLK and LCD_G7. |
| 89 | VSS | power_in | Ground pin. |
| 90 | VDD50USB | power_in | USB-domain supply pad (VDD50USB) for the USB regulator; its voltage range is not stated in the extracted datasheet text. |
| 91 | VDD33USB | power_in | USB supply, 3.0 V to 3.6 V when USB is used (Table 22). |
| 92 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 93 | PC6 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0, SDMMC2 VDDMMC rail) with alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT, SDMMC1_D6, DCMI_D0/PSSI_D0 and LCD_HSYNC. |
| 94 | PC7 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1, SDMMC2_D7, SDMMC1_D7, DCMI_D1/PSSI_D1 and LCD_G6. |
| 95 | PC8 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS, FMC_NE2/FMC_NCE, FMC_INT, SDMMC1_D0 and DCMI_D2/PSSI_D2. |
| 96 | PC9 | bidirectional | 5-V tolerant I/O (FT_fh0, I2C FM+ option) with alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, OCTOSPIM_P1_IO0, SDMMC1_D1, DCMI_D3/PSSI_D3 and LCD_B2. |
| 97 | PA8 | bidirectional | 5-V tolerant I/O (FT_fh0, I2C FM+ option) with alternate functions MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX and LCD_R6. |
| 98 | PA9 | bidirectional | USB-option 5-V tolerant I/O (FT_u, supplied by VDD33USB) with alternate functions TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0/PSSI_D0, LCD_R5 and OTG_HS_VBUS. |
| 99 | PA10 | bidirectional | USB-option 5-V tolerant I/O (FT_u) with alternate functions TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1 and LCD_B1. |
| 100 | PA11 | bidirectional | USB-option 5-V tolerant I/O (FT_u) with alternate functions TIM1_CH4, LPUART1_CTS, SPI2_SS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS, FDCAN1_RX, LCD_R4 and OTG_HS_DM. |
| 101 | PA12 | bidirectional | USB-option 5-V tolerant I/O (FT_u) with alternate functions TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX, LCD_R5 and OTG_HS_DP. |
| 102 | PA13 | bidirectional | 5-V tolerant I/O whose alternate function is JTMS/SWDIO debug, plus EVENTOUT. |
| 103 | VCAP | power_out | Internal voltage regulator output that must be connected to the external VCAP decoupling capacitor. |
| 104 | VSS | power_in | Ground pin. |
| 105 | VDDLDO | power_in | Supply of the internal LDO regulator, VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 22). |
| 106 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 107 | PA14 | bidirectional | 5-V tolerant I/O whose alternate function is JTCK/SWCLK debug, plus EVENTOUT. |
| 108 | PA15(JTDI) | bidirectional | 5-V tolerant I/O whose alternate function is JTDI debug, plus TIM2_CH1/TIM2_ETR, HDMI_CEC, SPI1_SS/I2S1_WS, SPI3_SS/I2S3_WS, SPI6_SS/I2S6_WS, UART4_RTS, LCD_R3, UART7_TX and LCD_B6. |
| 109 | PC10 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SDMMC1_D2, DCMI_D8/PSSI_D8 and LCD_R2. |
| 110 | PC11 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3, DCMI_D4/PSSI_D4 and LCD_B4. |
| 111 | PC12 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions TRACED3, TIM15_CH1, SPI6_SCK/I2S6_CK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9/PSSI_D9 and LCD_R6. |
| 112 | PD0 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions DFSDM1_CKIN6, UART4_RX, FDCAN1_RX, UART9_CTS, FMC_D2/FMC_DA2 and LCD_B1. |
| 113 | PD1 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions DFSDM1_DATIN6, UART4_TX, FDCAN1_TX and FMC_D3/FMC_DA3. |
| 114 | PD2 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, LCD_B7, SDMMC1_CMD, DCMI_D11/PSSI_D11 and LCD_B2. |
| 115 | PD3 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5/PSSI_D5 and LCD_G7. |
| 116 | PD4 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h1, OCTOSPI option) with alternate functions USART2_RTS, OCTOSPIM_P1_IO4 and FMC_NOE. |
| 117 | PD5 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h1, OCTOSPI option) with alternate functions USART2_TX, OCTOSPIM_P1_IO5 and FMC_NWE. |
| 118 | VSS | power_in | Ground pin. |
| 119 | VDDMMC | power_in | Standard operating voltage for the independent MMC I/Os, 1.62 V to 3.6 V (Table 22). |
| 120 | PD6 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3, supplied by VDDMMC) with alternate functions SAI1_D1, SPI3_MOSI/I2S3_SDO, USART2_RX, OCTOSPIM_P1_IO6, SDMMC2_CK, FMC_NWAIT, DCMI_D10/PSSI_D10 and LCD_B2. |
| 121 | PD7 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3, supplied by VDDMMC) with alternate functions DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN0, OCTOSPIM_P1_IO7, SDMMC2_CMD and FMC_NE1. |
| 122 | PG9 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3) with alternate functions SPI1_MISO/I2S1_SDI, USART6_RX, SPDIFRX1_IN3, OCTOSPIM_P1_IO6, SAI2_FS_B, SDMMC2_D0, FMC_NE2/FMC_NCE and DCMI_VSYNC/PSSI_RDY. |
| 123 | PG10 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3) with alternate functions OCTOSPIM_P2_IO6, SPI1_SS/I2S1_WS, LCD_G3, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2/PSSI_D2 and LCD_B2. |
| 124 | PG11 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3) with alternate functions LPTIM1_IN2, SPI1_SCK/I2S1_CK, SPDIFRX1_IN0, OCTOSPIM_P2_IO7, SDMMC2_D2, USART10_RX, DCMI_D3/PSSI_D3 and LCD_B3. |
| 125 | PG12 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3) with alternate functions LPTIM1_IN1, OCTOSPIM_P2_NCS, SPI6_MISO/I2S6_SDI, USART6_RTS, SPDIFRX1_IN1, SDMMC2_D3, USART10_TX, FMC_NE4 and LCD_B1. |
| 126 | PG13 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3) with alternate functions TRACED0, LPTIM1_OUT, SPI6_SCK/I2S6_CK, USART6_CTS/USART6_NSS, SDMMC2_D6, USART10_CTS/USART10_NSS, FMC_A24 and LCD_R0. |
| 127 | PG14 | bidirectional | Secondary-supply 5-V tolerant I/O (FT_sh3) with alternate functions TRACED1, LPTIM1_ETR, SPI6_MOSI/I2S6_SDO, USART6_TX, OCTOSPIM_P1_IO7, SDMMC2_D7, USART10_RTS, FMC_A25 and LCD_B0. |
| 128 | VSS | power_in | Ground pin. |
| 129 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
| 130 | PB3 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) whose alternate function is JTDO/TRACESWO, plus TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2, CRS_SYNC, UART7_RX and EVENTOUT. |
| 131 | PB4(NJTRST) | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) whose alternate function is NJTRST, plus TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SPI2_SS/I2S2_WS, SDMMC2_D3 and UART7_TX. |
| 132 | PB5 | bidirectional | High-speed low-voltage 5-V tolerant I/O (FT_h0) with alternate functions TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, I2C4_SMBA, FDCAN2_RX, OTG_HS_ULPI_D7, LCD_B5, FMC_SDCKE1, DCMI_D10/PSSI_D10 and UART5_RX. |
| 133 | PB6 | bidirectional | 5-V tolerant I/O (FT_f, I2C FM+ option) with alternate functions TIM16_CH1N, TIM4_CH1, I2C1_SCL, HDMI_CEC, I2C4_SCL, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, DCMI_D5/PSSI_D5 and UART5_TX. |
| 134 | PB7 | bidirectional | 5-V tolerant I/O (FT_fa, I2C FM+ and analog options) with alternate functions TIM17_CH1N, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, LPUART1_RX, DFSDM1_CKIN5, FMC_NL and DCMI_VSYNC/PSSI_RDY, and PVD_IN as additional function. |
| 135 | BOOT0 | input | Dedicated boot-mode pin (B structure) whose input voltage range is 0 V to 9 V (Table 22). |
| 136 | PB8 | bidirectional | 5-V tolerant I/O (FT_fsh3, I2C FM+ and secondary-supply options) with alternate functions TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, I2C4_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX, SDMMC2_D4, SDMMC1_D4, DCMI_D6/PSSI_D6 and LCD_B6. |
| 137 | PB9 | bidirectional | 5-V tolerant I/O (FT_fsh3, I2C FM+ and secondary-supply options) with alternate functions TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_SS/I2S2_WS, I2C4_SDA, SDMMC1_CDIR, UART4_TX, FDCAN1_TX, SDMMC2_D5, SDMMC1_D5, DCMI_D7/PSSI_D7 and LCD_B7. |
| 138 | PE0 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions LPTIM1_ETR, TIM4_ETR, LPTIM2_ETR, UART8_RX, SAI2_MCK_A, FMC_NBL0, DCMI_D2/PSSI_D2 and LCD_R0. |
| 139 | PE1 | bidirectional | 5-V tolerant I/O (FT_h2) with alternate functions LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3/PSSI_D3 and LCD_R6. |
| 140 | VCAP | power_out | Internal voltage regulator output that must be connected to the external VCAP decoupling capacitor. |
| 141 | VSS | power_in | Ground pin. |
| 142 | PDR_ON | input | Power-down reset control pin; the PDR can only be switched OFF through this pin, which is not available on all packages. |
| 143 | VDDLDO | power_in | Supply of the internal LDO regulator, VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 22). |
| 144 | VDD | power_in | Standard operating voltage supply, 1.62 V to 3.6 V (Table 22). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDD, VDDLDO, VDDSMPS, VDDA, VDD33USB, VDDMMC, VBAT, VREF+) | VDDX − VSS | -0.3 | 4 | V | 81 | ||
| Input voltage on TT_xx pins | VIN | 4 | V | TT_xx pins; lower limit VSS−0.3 is referenced to VSS | 81 | ||
| Input voltage on BOOT0 pin | VIN | 9 | V | BOOT0 pin; lower limit VSS | 81 | ||
| Input voltage on any other pins | VIN | 4 | V | Any other pins; lower limit VSS−0.3 is referenced to VSS | 81 | ||
| Variations between different VDDX power pins of the same domain | /ΔVDDX/ | 50 | mV | 81 | |||
| Variations between all the different ground pins | /VSSx−VSS/ | 50 | mV | 82 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 620 | mA | 82 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 620 | mA | 82 | |||
| Maximum current into each VDD power pin (source) | IVDD | 100 | mA | 82 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS | 100 | mA | 82 | |||
| Output current sunk or sourced by any I/O and control pin | IIO | 20 | mA | 82 | |||
| Output current sunk or sourced by Pxy_C pin | IIO | 1 | mA | Pxy_C pin | 82 | ||
| Total output current sunk by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | Sunk | 82 | ||
| Total output current sourced by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | Sourced | 82 | ||
| Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | 82 | ||
| Injected current on PA4, PA5 | IINJ(PIN) | 0 | 0 | mA | 82 | ||
| Total injected current (sum of all I/Os and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 82 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 82 | ||
| Maximum junction temperature | TJmax | 130 | °C | Limited to 105 °C in VOS0 voltage range | 82 | ||
| Standard operating voltage | VDD | 1.62 | 3.6 | V | 83 | ||
| Supply voltage for the internal regulator | VDDLDO | 1.62 | 3.6 | V | VDDLDO ≤ VDD | 83 | |
| Supply voltage for the internal regulator (power-up sequence) | VDDLDO | 1.2 | 3.6 | V | Only for power-up sequence when SMPS configured to supply the LDO | 83 | |
| Supply voltage for the internal SMPS Step-down converter | VDDSMPS | 1.62 | 3.6 | V | VDDSMPS = VDD | 83 | |
| Standard operating voltage for independent MMC I/Os | VDDMMC | 1.62 | 3.6 | V | Independent MMC I/Os used | 83 | |
| Standard operating voltage, USB domain | VDD33USB | 3 | 3.6 | V | USB used | 83 | |
| Standard operating voltage, USB domain | VDD33USB | 0 | 3.6 | V | USB not used | 83 | |
| Analog operating voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 83 | |
| Analog operating voltage | VDDA | 1.8 | V | DAC used | 83 | ||
| Analog operating voltage | VDDA | 2 | V | OPAMP used | 83 | ||
| Analog operating voltage | VDDA | 0 | V | ADC, DAC, OPAMP, COMP, VREFBUF not used | 83 | ||
| Backup operating voltage | VBAT | 1.2 | 3.6 | V | 83 | ||
| I/O Input voltage on TT_xx I/O | VIN | -0.3 | V | TT_xx I/O; upper limit VDD+0.3 | 83 | ||
| I/O Input voltage on BOOT0 | VIN | 0 | 9 | V | BOOT0 | 83 | |
| I/O Input voltage on all I/O except BOOT0 and TT_xx | VIN | -0.3 | V | All I/O except BOOT0 and TT_xx; upper limit Min(VDD,VDDA,VDD33USB,VDDMMC)+3.6 V<5.5 V | 83 | ||
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 0.95 | 1 | 1.05 | V | VOS3 (max frequency 88 MHz) | 83 |
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 1.05 | 1.1 | 1.15 | V | VOS2 (max frequency 160 MHz) | 83 |
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 1.15 | 1.2 | 1.25 | V | VOS1 (max frequency 225 MHz) | 83 |
| Internal regulator ON (LDO or SMPS) core voltage | VCORE | 1.25 | 1.3 | 1.35 | V | VOS0 (max frequency 280 MHz) | 83 |
| Regulator OFF external core voltage | VCORE | 0.97 | 1 | 1.05 | V | Regulator OFF: external VCORE supplied on VCAP pins; VOS3 (max frequency 88 MHz) | 83 |
| Regulator OFF external core voltage | VCORE | 1.07 | 1.1 | 1.15 | V | Regulator OFF: external VCORE supplied on VCAP pins; VOS2 (max frequency 160 MHz) | 83 |
| Regulator OFF external core voltage | VCORE | 1.27 | 1.3 | 1.33 | V | Regulator OFF: external VCORE supplied on VCAP pins; VOS0 (max frequency 280 MHz) | 84 |
| Ambient temperature for the suffix 6 version | TA | -40 | 85 | °C | Maximum power dissipation | 84 | |
| Ambient temperature for the suffix 6 version | TA | -40 | 105 | °C | Low-power dissipation | 84 | |
| Junction temperature range | TJ | -40 | 105 | °C | VOS0 | 84 | |
| Junction temperature range | TJ | -40 | 130 | °C | VOS3, VOS2, VOS1 | 84 | |
| SMPS step-down converter supply voltage | VDDSMPS | 2.3 | 3.6 | V | VOUT = 1.8 V | 87 | |
| SMPS step-down converter supply voltage | VDDSMPS | 3 | 3.6 | V | VOUT = 2.5 V | 87 | |
| SMPS step-down converter output voltage (including line and load transient) | VOUT | 2.25 | 2.5 | 2.75 | V | IOUT=600 mA | 87 |
| SMPS step-down converter output voltage (including line and load transient) | VOUT | 1.62 | 1.8 | 1.98 | V | 87 | |
| SMPS output current, internal and external usage | IOUT | 600 | mA | Internal and external usage | 87 | ||
| SMPS switch on-resistance | RDSON | 100 | 120 | mΩ | 87 | ||
| Reset temporization after POR released | tRSTTEMPO | 377 | 550 | µs | 91 | ||
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.62 | 1.67 | 1.71 | V | Rising edge | 91 |
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.58 | 1.62 | 1.68 | V | Falling edge | 91 |
| Internal reference voltage | VREFINT | 1.18 | 1.216 | 1.255 | V | −40 °C < TJ < 130 °C | 92 |
| Internal reference voltage spread over the temperature range | ΔVREFINT | 5 | 15 | mV | −40 °C < TJ < 130 °C | 92 | |
| Average temperature coefficient | Tcoeff | 20 | 70 | ppm/°C | 92 | ||
| Average voltage coefficient | VDDcoeff | 10 | 1370 | ppm/V | 3.0 V < VDD < 3.6 V | 92 |
CAD (KiCad official)
- Symbol:
STM32H7B3ZIT6Q - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
stm32h7b3zit6q-etched.step/stm32h7b3zit6q-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h7b3zit6q.step/stm32h7b3zit6q.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (238 pp, sha256
79cfcb3fc210a55d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).