3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSBC856BLT1G
onsemi · Bipolar Transistors - BJT · SOT-23
SBC856BLT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | passive | Base terminal of the PNP transistor; the datasheet gives no separate pin limit, so the device-level ratings apply (VEBO −5.0 V, continuous IC −100 mA, peak IC −200 mA for the BC856/SBC856 type). |
| 2 | EMITTER | passive | Emitter terminal of the PNP transistor, with emitter-base voltage limited to VEBO −5.0 V and collector current limited to −100 mA continuous (−200 mA peak). |
| 3 | COLLECTOR | passive | Collector terminal of the PNP transistor, with collector-emitter voltage limited to VCEO −65 V and collector-base voltage to VCBO −80 V for the BC856/SBC856 type, and collector current limited to −100 mA continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | V(BR)CEO | -65 | V | IC = −10 mA | 2 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CES | -80 | V | IC = −10 µA, VEB = 0 | 2 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | -80 | V | IC = −10 µA | 2 | ||
| Emitter-Base Breakdown Voltage | V(BR)EBO | -5 | V | IE = −1.0 µA | 2 | ||
| Collector Cutoff Current | ICBO | -15 | nA | VCB = −30 V | 2 | ||
| Collector Cutoff Current | ICBO | -4 | µA | VCB = −30 V, TA = 150°C | 2 | ||
| Base-Emitter On Voltage | VBE(on) | -0.6 | -0.75 | V | IC = −2.0 mA, VCE = −5.0 V | 2 | |
| Base-Emitter On Voltage | VBE(on) | -0.82 | V | IC = −10 mA, VCE = −5.0 V | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.3 | V | IC = −10 mA, IB = −0.5 mA | 2 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.65 | V | IC = −100 mA, IB = −5.0 mA | 2 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.7 | V | IC = −10 mA, IB = −0.5 mA | 2 | ||
| Base-Emitter Saturation Voltage | VBE(sat) | -0.9 | V | IC = −100 mA, IB = −5.0 mA | 2 | ||
| Current-Gain - Bandwidth Product | fT | 100 | MHz | IC = −10 mA, VCE = −5.0 Vdc, f = 100 MHz | 2 | ||
| Output Capacitance | Cob | 4.5 | pF | VCB = −10 V, f = 1.0 MHz | 2 | ||
| Noise Figure (BC856 series) | NF | 10 | dB | IC = −0.2 mA, VCE = −5.0 Vdc, RS = 2.0 k, f = 1.0 kHz, BW = 200 Hz | 2 | ||
| Collector-Emitter Voltage | VCEO | -65 | V | BC856 series | 1 | ||
| Collector-Base Voltage | VCBO | -80 | V | BC856 series | 1 | ||
| Emitter-Base Voltage | VEBO | -5 | V | 1 | |||
| Collector Current - Continuous | IC | -100 | mAdc | 1 | |||
| Collector Current - Peak | IC | -200 | mAdc | 1 | |||
| Junction and Storage Temperature | TJ, Tstg | -55 | 150 | °C | 1 | ||
| Total Device Dissipation FR-5 Board | PD | 225 | mW | TA = 25°C, FR-5 board (Note 1) | 1 | ||
| Thermal Resistance, Junction-to-Ambient (FR-5 Board) | RJA | 556 | °C/W | FR-5 board (Note 1) | 1 | ||
| Total Device Dissipation Alumina Substrate | PD | 300 | mW | TA = 25°C, alumina substrate (Note 2) | 1 | ||
| Thermal Resistance, Junction-to-Ambient (Alumina Substrate) | RJA | 417 | °C/W | alumina substrate (Note 2) | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SBC856BLT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sbc856blt1g-etched.step/sbc856blt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sbc856blt1g.step/sbc856blt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (7 pp, sha256
5b3358db41b73faa, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).