Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430G2352IPW14R

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-14

MSP430G2352IPW14R from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Digital supply voltage. Operating range 1.8 V to 3.6 V. Bypass locally to DVSS with a decoupling capacitor (typ. 100 nF).
2 P1.0/TA0CLK/ACLK/A0/CA0 bidirectional General-purpose digital I/O pin P1.0 with muxed alternate functions: Timer0_A TACLK external clock input, ACLK signal output, ADC10 analog input A0, and Comparator_A+ input CA0.
3 P1.1/TA0.0/A1/CA1 bidirectional General-purpose digital I/O pin P1.1 with muxed alternate functions: Timer0_A CCI0A capture input / Out0 compare output, ADC10 analog input A1, and Comparator_A+ input CA1.
4 P1.2/TA0.1/A2/CA2 bidirectional General-purpose digital I/O pin P1.2 with muxed alternate functions: Timer0_A CCI1A capture input / Out1 compare output, ADC10 analog input A2, and Comparator_A+ input CA2.
5 P1.3/ADC10CLK/CAOUT/A3/VREF-/VEREF-/CA3 bidirectional General-purpose digital I/O pin P1.3 with muxed alternate functions: ADC10 conversion clock output, Comparator_A+ output CAOUT, ADC10 analog input A3, ADC10 negative reference input (VREF-/VEREF-), and Comparator_A+ input CA3.
6 P1.4/SMCLK/TA0.2/A4/VREF+/VEREF+/CA4/TCK bidirectional General-purpose digital I/O pin P1.4 with muxed alternate functions: SMCLK signal output, Timer0_A CCI2A capture / Out2 compare, ADC10 analog input A4, ADC10 positive reference input (VREF+/VEREF+), Comparator_A+ input CA4, and JTAG test clock (TCK) for 4-wire programming/test.
7 P1.5/TA0.0/SCLK/A5/CA5/TMS bidirectional General-purpose digital I/O pin P1.5 with muxed alternate functions: Timer0_A Out0 compare output, USI clock (SCLK) - clock input in I2C mode, clock in/out in SPI mode, ADC10 analog input A5, Comparator_A+ input CA5, and JTAG test mode select (TMS).
8 P1.6/TA0.1/SDO/SCL/A6/CA6/TDI/TCLK bidirectional General-purpose digital I/O pin P1.6 with muxed alternate functions: Timer0_A Out1 compare output, USI SDO (SPI data out) or SCL (I2C clock), ADC10 analog input A6, Comparator_A+ input CA6, and JTAG TDI / TCLK for programming and test.
9 P1.7/CAOUT/SDI/SDA/A7/CA7/TDO/TDI bidirectional General-purpose digital I/O pin P1.7 with muxed alternate functions: Comparator_A+ output CAOUT, USI SDI (SPI data in) or SDA (I2C data), ADC10 analog input A7, Comparator_A+ input CA7, and JTAG TDO/TDI (direction selected by JTAG instruction).
10 RST/NMI/SBWTDIO bidirectional Active-low reset input (RST), configurable non-maskable interrupt input (NMI), and Spy-Bi-Wire test data I/O (SBWTDIO) during programming/debug. Requires external pull-up when Spy-Bi-Wire is used (typ. 47 kΩ) with a small filter cap.
11 TEST/SBWTCK input Selects JTAG test mode for Port 1 pins (TEST) and provides Spy-Bi-Wire test clock input (SBWTCK) during programming/test. The device security fuse is connected to this pin.
12 XOUT/P2.7 bidirectional Output terminal of the low-frequency crystal oscillator (typically 32.768 kHz) or general-purpose digital I/O P2.7. After reset the oscillator output driver is connected to this pad; excess current can flow if driven as an input until P2SEL.7 is cleared.
13 XIN/P2.6/TA0.1 bidirectional Input terminal of the low-frequency crystal oscillator (typ. 32.768 kHz) or external digital clock source, or general-purpose digital I/O P2.6, or Timer0_A Out1 compare output.
14 DVSS power_in Digital ground reference. Tie to system ground plane; place decoupling capacitors between DVCC and DVSS with short return paths.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Embedded Processors & Controllers
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • MSP430G2352IPW14R
  • MSP430G2352IPW14RIPW20
  • MSP430G2352IPW14RIN20
  • MSP430G2352IPW14RIRSA16

CAD (KiCad official)

  • Symbol: MSP430G2352IPW14R
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: msp430g2352ipw14r-etched.step / msp430g2352ipw14r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2352ipw14r.step / msp430g2352ipw14r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 4a95b55c77e49dbf, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF