component
HT7017-F
Public Made by Adomby adom
HiTrend Tech (Shanghai) Energy Metering, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT7017-F
HiTrend Tech (Shanghai) · Energy Metering · SSOP-16-150mil
HT7017-F from HiTrend Tech (Shanghai), in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVCC | power_in | Analog power supply input, 3.0V to 5.5V. |
| 2 | V3P | input | Positive voltage-channel input; (VP-VN) range ±870mV peak. |
| 3 | V3N | input | Negative input of the voltage channel. |
| 4 | V2P | input | Current channel 2 single-ended input; (VP-GND) range ±900mV peak. |
| 5 | V1P | input | Current channel 1 positive input; (VP-VN) range ±900mV peak. |
| 6 | V1N | input | Current channel 1 negative input. |
| 7 | VREF | power_out | ADC reference voltage output, typically 1.2V, with external 0.1uF in parallel with 1uF capacitor. |
| 8 | AGND | power_in | Analog ground. |
| 9 | PF | output | Active energy pulse output. |
| 10 | RX | input | UART receive data input. |
| 11 | TX/IRQ | output | UART data output with internal pull-up to high level; can be reassigned by command word as interrupt IRQ output. |
| 12 | XTALI | input | 6MHz crystal input; no 10M resistor needed between this pin and XTALO. |
| 13 | XTALO | output | 6MHz crystal output; no 10M resistor needed between this pin and XTALI. |
| 14 | DVDD | power_in | Digital power supply input, 3.0V to 5.5V. |
| 15 | RST | input | Active-low chip reset with strong internal pull-up (about 10K at 5V, 16K at 3.3V); a low level longer than 200uS resets the chip. |
| 16 | VDD1P8 | power_out | Digital 1.8V output, with external 0.1uF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HiTrend Tech (Shanghai) |
| Package | SSOP-16-150mil |
| Category | Data Acquisition |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 数字电源电压 (3.3V option of 3.0/4.5 / 3.3/5 / 3.6/5.5 pairs) | DVDD | 3 | 3.3 | 3.6 | V | 3.3V option of printed pair | 54 |
| 数字电源电压 (5V option of 3.0/4.5 / 3.3/5 / 3.6/5.5 pairs) | DVDD | 4.5 | 5 | 5.5 | V | 5V option of printed pair | 54 |
| 模拟电源电压 (3.3V option of 3.0/4.5 / 3.3/5 / 3.6/5.5 pairs) | AVDD | 3 | 3.3 | 3.6 | V | 3.3V option of printed pair | 54 |
| 模拟电源电压 (5V option of 3.0/4.5 / 3.3/5 / 3.6/5.5 pairs) | AVDD | 4.5 | 5 | 5.5 | V | 5V option of printed pair | 54 |
| 有功电能测量误差 | 0.1 | % | 常温 8000:1 范围 | 54 | |||
| 无功电能测量误差 | 0.1 | % | 常温 8000:1 范围 | 54 | |||
| 电压有效值测量误差 | 0.1 | % | 1000:1 | 54 | |||
| 电流有效值测量误差 | 0.1 | % | 1000:1 | 54 | |||
| ADC Vref 温度系数 | 10 | 35 | ppm | 54 | |||
| AVDD to AGND | AVDD | -0.3 | 7 | V | 53 | ||
| DVDD to DGND | DVDD | -0.3 | 7 | V | 53 | ||
| Analog Input PIN | VxP, VxN | -3 | 3 | V | 53 | ||
| Reference Input PIN | -0.3 | V | max printed as AVDD+0.3V | 53 | |||
| Digital Input PIN | -0.3 | V | max printed as AVDD+0.3V | 53 | |||
| Operating Temperature Range | -40 | 85 | ℃ | 53 | |||
| Storage Temperature Range | -65 | 150 | ℃ | 53 | |||
| Junction Temperature | 150 | ℃ | 53 | ||||
| ESD Protection to All Pins | -6 | 6 | KV | all pins | 53 | ||
| ESD 机器放电模式 (MM) | 200 | V | MM model, ≥200 V as printed | 54 | |||
| ESD 人体放电模式 (HBM) | 4000 | V | HBM model, ≥4000 V as printed | 54 |
CAD (KiCad official)
- Symbol:
HT7017-F - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ht7017-f-etched.step/ht7017-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht7017-f.step/ht7017-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HiTrend Tech (Shanghai) datasheet (60 pp, sha256
e0dd55cc1912c9f6, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).