component
TP2012-VR
Public Made by Adomby adom
3PEAK Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTP2012-VR
3PEAK · Comparators · MSOP-8
TP2012-VR from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Comparator A push-pull output, with a voltage range that extends to within millivolts of each supply rail. |
| 2 | -IN A | input | Comparator A inverting input, with a voltage range from V- - 0.3V to V+ + 0.3V. |
| 3 | +IN A | input | Comparator A non-inverting input, with the same voltage range as -IN (V- - 0.3V to V+ + 0.3V). |
| 4 | V- | power_in | Negative power supply (VSS), normally tied to ground, and V+ to V- must be 1.6V to 5.5V, with a 0.1uF bypass capacitor if not grounded. |
| 5 | +IN B | input | Comparator B non-inverting input, with the same voltage range as -IN (V- - 0.3V to V+ + 0.3V). |
| 6 | -IN B | input | Comparator B inverting input, with a voltage range from V- - 0.3V to V+ + 0.3V. |
| 7 | OUT B | output | Comparator B push-pull output, with a voltage range that extends to within millivolts of each supply rail. |
| 8 | V+ | power_in | Positive power supply (VDD), typically 1.6V to 5.5V, with a 0.1uF bypass capacitor placed as close to the part as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.6 | 5.5 | V | ● full operating temperature range | 4 | |
| Input Offset Voltage | VOS | -3 | 0.5 | 3 | mV | VCM = 1.2V | 4 |
| Input Offset Voltage | VOS | -4 | 0.5 | 4 | mV | VCM = Vdd | 4 |
| Input Hysteresis Voltage | VHYST | 2 | 4 | 7 | mV | VCM = 1.2V | 4 |
| Input Resistance | RIN | 100 | GΩ | 4 | |||
| Common Mode Rejection Ratio | CMRR | 50 | 82 | dB | VCM = VSS to VDD | 4 | |
| Power Supply Rejection Ratio | PSRR | 60 | 90 | dB | 4 | ||
| Quiescent Current per Comparator | IQ | 160 | 200 | 250 | nA | 4 | |
| Propagation Delay (Low-to-High) | tPD+ | 13 | 19 | μs | Overdrive=100mV, VIN- =1.2V | 4 | |
| Propagation Delay (High-to-Low) | tPD- | 14 | 18 | μs | Overdrive=100mV, VIN- =1.2V | 4 | |
| Propagation Delay Skew | tPD-SKEW | 1 | 5 | μs | Overdrive=100mV, VIN- =1.2V | 4 | |
| Supply Voltage (absolute maximum, V+, V-) | V+, V- | 6 | V | 3 | |||
| Input Current | -10 | 10 | mA | +IN, -IN, Note 2 | 3 | ||
| Output Current | -25 | 25 | mA | OUT | 3 | ||
| Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec | 3 | |||
| ESD Human Body Model | HBM | 2 | kV | ANSI/ESDA/JEDEC JS-001 | 3 | ||
| ESD Charged Device Model | CDM | 1 | kV | ANSI/ESDA/JEDEC JS-002 | 3 |
CAD (KiCad official)
- Symbol:
TP2012-VR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tp2012-vr-etched.step/tp2012-vr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp2012-vr.step/tp2012-vr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (21 pp, sha256
9ffcbdabe9616c86, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).