3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGCM1885C2A470FA16D
Murata Electronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · 0603
GCM1885C2A470FA16D from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Terminal 1 | passive | One termination (external electrode) of the 47pF C0G capacitor, rated DC 100V, with a capacitance tolerance of +/-1%. |
| 2 | Terminal 2 | passive | The other termination (external electrode) of the 47pF C0G capacitor, rated DC 100V, operating from -55 to 125°C. The part is non-polarized. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | PMIC |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance | -1 | 1 | % | Printed +/-1% for 47pF (tolerance code F in part number) | 1 | ||
| Capacitance drift (step temperature test) | -0.2 | 0.2 | % | Temperature step test; +/-0.2% or +/-0.05pF, whichever is larger; measured at 1.0Vrms or less | 5 | ||
| Capacitance drift (step temperature test) | -0.05 | 0.05 | pF | Temperature step test; +/-0.2% or +/-0.05pF, whichever is larger; measured at 1.0Vrms or less | 5 | ||
| Temperature coefficient | TC | -30 | 0 | 30 | ppm/℃ | Temp. coeff. 0 +/-30 ppm/℃ over 25 to 125℃, reference temperature 25℃ | 1 |
| Q or dissipation factor | Q | 1000 | Measurement temperature 25℃, frequency 1.0+/-0.1MHz, voltage 0.5 to 5.0Vrms | 4 | |||
| Insulation resistance (room temperature) | IR | 100000 | MΩ | Measurement temperature 25℃, measurement voltage rated voltage, charging time 2min, charge/discharge current 50mA max | 4 | ||
| Insulation resistance (high temperature) | IR | 10000 | MΩ | Measurement temperature 125℃, measurement voltage rated voltage, charging time 2min, charge/discharge current 50mA max | 4 | ||
| Operating temperature range | -55 | 125 | ℃ | Operating temperature range (maximum operating temperature 125℃) | 1 | ||
| Maximum applied voltage (DC rated voltage) | 100 | V | Applied voltage between terminals shall be less than or equal to rated voltage 100VDC; AC zero-to-peak or pulse peak-to-peak not to exceed rated DC voltage | 11 | |||
| Capacitance change (moisture resistance) | -3 | 3 | % | Test temperature +25℃ to +65℃, test humidity 80%RH to 98%RH, 10 consecutive 24h cycles | 2 | ||
| Q or D.F. (moisture resistance) | Q | 350 | After moisture resistance test (+25℃ to +65℃, 80%RH to 98%RH) | 2 | |||
| Insulation resistance (moisture resistance) | IR | 10000 | MΩ | Room temperature, after moisture resistance test | 2 | ||
| Capacitance change (temperature cycling) | -2.5 | 2.5 | % | Temperature cycling, 1000 cycles | 2 | ||
| Q or D.F. (temperature cycling) | Q | 1000 | Temperature cycling, 1000 cycles | 2 | |||
| Insulation resistance (temperature cycling) | IR | 10000 | MΩ | Room temperature, after temperature cycling, 1000 cycles | 2 | ||
| Capacitance change (high temperature exposure) | -2.5 | 2.5 | % | Test temperature 150+/-3℃, test time 1000+/-12h | 2 | ||
| Q or D.F. (high temperature exposure) | Q | 1000 | Test temperature 150+/-3℃, test time 1000+/-12h | 2 | |||
| Insulation resistance (high temperature exposure) | IR | 10000 | MΩ | Room temperature, after high temperature exposure 150+/-3℃, 1000+/-12h | 2 | ||
| Insulation resistance (resistance to soldering heat) | IR | 10000 | MΩ | Solder bath method, 260+/-5℃, 10+/-1s, Sn-3.0Ag-0.5Cu | 3 | ||
| Insulation resistance (vibration) | IR | 10000 | MΩ | Vibration 10Hz to 2000Hz to 10Hz, 20min, total amplitude 1.5mm, 12 cycles in each of 3 directions | 3 | ||
| Insulation resistance (mechanical shock) | IR | 10000 | MΩ | Half-sine, peak 1500g, holding time 0.5ms, velocity change 4.7m/s, 18 shocks | 3 | ||
| Insulation resistance (resistance to solvents) | IR | 10000 | MΩ | Per MIL-STD-202 Method 215 | 3 | ||
| Capacitance change (operational life) | -3 | 3 | % | Test temperature maximum operating temperature +/-3℃, test time 1000+/-12h, test voltage rated voltage and 1.3+0.2/-0Vdc (6.8kΩ series resistor) | 3 | ||
| Q or D.F. (operational life) | Q | 350 | Maximum operating temperature +/-3℃, 1000+/-12h, rated voltage and 1.3+0.2/-0Vdc | 3 | |||
| Insulation resistance (operational life) | IR | 1000 | MΩ | Maximum operating temperature +/-3℃, 1000+/-12h, rated voltage and 1.3+0.2/-0Vdc | 3 | ||
| Capacitance change (biased humidity) | -3 | 3 | % | Test temperature 85+/-3℃, test humidity 80%RH to 85%RH, test time 1000+/-12h | 3 | ||
| Q or D.F. (biased humidity) | Q | 200 | Test temperature 85+/-3℃, test humidity 80%RH to 85%RH, 1000+/-12h | 3 | |||
| Insulation resistance (biased humidity) | IR | 1000 | MΩ | Room temperature, after biased humidity 85+/-3℃, 80%RH to 85%RH | 3 | ||
| Capacitance change (board flex) | -5 | 5 | % | Reflow-mounted on test substrate, flexure 3mm, holding time 60s | 4 | ||
| Beam load (destruction value) | 20 | N | Destruction value more than 20N; stress load speed 0.5mm/s | 4 | |||
| Reflow peak temperature (lead-free) | 240 | 260 | ℃ | Lead-free solder Sn-3.0Ag-0.5Cu, air or N2, reflow soldering | 16 | ||
| Rated voltage | 100 | V | DC rated voltage (DC 100V) | 1 |
CAD (KiCad official)
- Symbol:
GCM1885C2A470FA16D - Footprint:
Capacitor_SMD:C_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
gcm1885c2a470fa16d-etched.step/gcm1885c2a470fa16d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gcm1885c2a470fa16d.step/gcm1885c2a470fa16d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (31 pp, sha256
7141faba84ad76d5, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).