component
SN74HCT374DWR
Public Made by Adomby adom
Texas Instruments Flip Flops, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74HCT374DWR
Texas Instruments · Flip Flops · SOIC-20-300mil
SN74HCT374DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output-enable input; when high, forces all eight Q outputs to the high-impedance state, when low the outputs present the stored logic levels. |
| 2 | 1Q | tri_state | Three-state true output of flip-flop 1, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 3 | 1D | input | TTL-compatible data input of flip-flop 1; its logic level is transferred to Q on the rising edge of CLK. |
| 4 | 2D | input | TTL-compatible data input of flip-flop 2; its logic level is transferred to Q on the rising edge of CLK. |
| 5 | 2Q | tri_state | Three-state true output of flip-flop 2, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 6 | 3Q | tri_state | Three-state true output of flip-flop 3, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 7 | 3D | input | TTL-compatible data input of flip-flop 3; its logic level is transferred to Q on the rising edge of CLK. |
| 8 | 4D | input | TTL-compatible data input of flip-flop 4; its logic level is transferred to Q on the rising edge of CLK. |
| 9 | 4Q | tri_state | Three-state true output of flip-flop 4, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 10 | GND | power_in | Ground reference (0 V) supply pin for the device. |
| 11 | CLK | input | Common clock input for all eight edge-triggered D-type flip-flops; on the positive (rising) transition the Q outputs are set to the levels present at the D inputs, with a minimum pulse duration and setup/hold times as specified in the timing requirements. |
| 12 | 5Q | tri_state | Three-state true output of flip-flop 5, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 13 | 5D | input | TTL-compatible data input of flip-flop 5; its logic level is transferred to Q on the rising edge of CLK. |
| 14 | 6D | input | TTL-compatible data input of flip-flop 6; its logic level is transferred to Q on the rising edge of CLK. |
| 15 | 6Q | tri_state | Three-state true output of flip-flop 6, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 16 | 7Q | tri_state | Three-state true output of flip-flop 7, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 17 | 7D | input | TTL-compatible data input of flip-flop 7; its logic level is transferred to Q on the rising edge of CLK. |
| 18 | 8D | input | TTL-compatible data input of flip-flop 8; its logic level is transferred to Q on the rising edge of CLK. |
| 19 | 8Q | tri_state | Three-state true output of flip-flop 8, capable of ±6 mA drive at 5 V and driving up to 15 LSTTL loads; goes high-impedance when OE is high. |
| 20 | VCC | power_in | Positive supply voltage pin; recommended operating range is 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74HCT374DWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74hct374dwr-etched.step/sn74hct374dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hct374dwr.step/sn74hct374dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
d6967f49e2d44280, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).