Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMC6482IDT

STMicroelectronics · Operational Amplifier · SOP-8

LMC6482IDT from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1; rail-to-rail output swings within 40 mV of each supply rail with a 10 kΩ load, capable of ±37 mA sink/source at VCC = 4 V.
2 IN1- input Inverting input of amplifier 1; input bias current 50 pA max, input resistance 1 TΩ typ; limit input current to 10 mA if pin voltage exceeds supply by 0.5 V.
3 IN1+ input Non-inverting input of amplifier 1; rail-to-rail common-mode range (VCC−) − 0.1 V to (VCC+) + 0.1 V; input bias current 50 pA max.
4 VCC- power_in Negative supply rail; operating range (VCC+) − (VCC−) = 2.7 V to 16 V; absolute maximum supply voltage 18 V.
5 IN2+ input Non-inverting input of amplifier 2; rail-to-rail common-mode range (VCC−) − 0.1 V to (VCC+) + 0.1 V; input bias current 50 pA max.
6 IN2- input Inverting input of amplifier 2; input bias current 50 pA max, input resistance 1 TΩ typ; limit input current to 10 mA if pin voltage exceeds supply by 0.5 V.
7 OUT2 output Output of amplifier 2; rail-to-rail output swings within 40 mV of each supply rail with a 10 kΩ load, capable of ±37 mA sink/source at VCC = 4 V.
8 VCC+ power_in Positive supply rail; operating range 2.7 V to 16 V (VCC+ − VCC−); absolute maximum 18 V; decouple with 22 nF as close to pin as possible.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage Vio 2 mV Vicm = VCC/2 7
Input offset voltage (Tmin < Top < Tmax) Vio 2.5 mV Tmin < Top < Tmax 7
Input offset voltage drift ΔVio/ΔT 5 µV/°C 7
Input bias current Iib 1 50 pA Vout = VCC/2 7
Input bias current (Tmin < Top < Tmax) Iib 200 pA Tmin < Top < Tmax 7
Input offset current Iio 1 50 pA Vout = VCC/2 7
Input offset current (Tmin < Top < Tmax) Iio 200 pA Tmin < Top < Tmax 7
Common mode rejection ratio CMRR 75 98 dB Vicm = -0.1 to 16.1 V, Vout = VCC/2 7
Common mode rejection ratio (Tmin < Top < Tmax) CMRR 70 dB Tmin < Top < Tmax 7
Supply voltage rejection ratio SVRR 100 131 dB Vcc = 4 to 16 V 7
Supply voltage rejection ratio (Tmin < Top < Tmax) SVRR 90 dB Tmin < Top < Tmax 7
Large signal voltage gain (RL = 2 kΩ) Avd 90 146 dB RL = 2 kΩ, Vout= 0.3 to 15.7 V 7
Large signal voltage gain (RL = 2 kΩ, Tmin < Top < Tmax) Avd 85 dB Tmin < Top < Tmax 7
Large signal voltage gain (RL = 10 kΩ) Avd 90 149 dB RL = 10 kΩ, Vout = 0.2 to 15.8 V 7
Large signal voltage gain (RL = 10 kΩ, Tmin < Top < Tmax) Avd 85 dB Tmin < Top < Tmax 7
High level output voltage (RL = 2 kΩ to V/2) VOH 70 130 mV RL = 2 kΩ to V/2 7
High level output voltage (RL = 2 kΩ, Tmin < Top < Tmax) VOH 150 mV Tmin < Top < Tmax 7
High level output voltage (RL = 10 kΩ) VOH 16 40 mV RL = 10 kΩ 7
High level output voltage (RL = 10 kΩ, Tmin < Top < Tmax) VOH 50 mV Tmin < Top < Tmax 7
Low level output voltage (RL = 2 kΩ) VOL 70 130 mV RL = 2 kΩ 7
Low level output voltage (RL = 2 kΩ, Tmin < Top < Tmax) VOL 150 mV Tmin < Top < Tmax 7
Low level output voltage (RL = 10 kΩ) VOL 15 40 mV RL = 10 kΩ 7
Low level output voltage (RL = 10 kΩ, Tmin < Top < Tmax) VOL 50 mV Tmin < Top < Tmax 7
Output sink current Isink 30 40 mA Vout = VCC 7
Output sink current (Tmin < Top < Tmax) Isink 15 mA Tmin < Top < Tmax 7
Output source current Isource 50 68 mA Vout = 0 V 7
Output source current (Tmin < Top < Tmax) Isource 45 mA Tmin < Top < Tmax 7
Supply current per amplifier ICC 660 900 µA No load, Vout = VCC/2 7
Supply current per amplifier (Tmin < Top < Tmax) ICC 1000 µA Tmin < Top < Tmax 7
Gain bandwidth product GBP 1.9 2.7 MHz RL = 10 kΩ, CL = 100 pF 7
Negative slew rate SRn 0.7 0.95 V/µs Av = 1, Vout = 10 VPP, 10 % to 90% 8
Negative slew rate (Tmin < Top < Tmax) SRn 0.6 V/µs Tmin < Top < Tmax 8
Positive slew rate SRp 1 1.4 V/µs Av = 1, Vout = 10 VPP, 10 % to 90% 8
Positive slew rate (Tmin < Top < Tmax) SRp 0.9 V/µs Tmin < Top < Tmax 8
Supply voltage VCC 18 V 3
Input current Iin 10 mA Input current must be limited by a series resistor 3
Storage temperature Tstg -65 150 °C 3
Maximum junction temperature Tj 150 °C 3
ESD HBM (human body model) 4000 V JEDEC JESD22-A114F 3
ESD MM (machine model) 100 V JEDEC JESD22-A115A 3
ESD CDM (charged device model) 1500 V ANSI/ESD STM5.3.1 3
Latch-up immunity 200 mA 3
Thermal resistance junction to ambient (SO-8) Rthja 125 °C/W SO-8 package; Rth are typical values 3
Supply voltage (operating) VCC 2.7 16 V 3
Operating free air temperature range Toper -40 125 °C 3

CAD (KiCad official)

  • Symbol: LMC6482IDT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmc6482idt-etched.step / lmc6482idt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmc6482idt.step / lmc6482idt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (25 pp, sha256 192d9e14c0fa1f3f, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF