Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS92640PWPR

Texas Instruments · LED Drivers · HTSSOP-14-EP

TPS92640PWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Connect to input voltage between 7V and 85V with 1-µF bypass capacitor.
2 RON input Connect resistor to VIN and capacitor to GND to set switching frequency.
3 UDIM input Connect resistor divider from VIN to set undervoltage lockout threshold or drive with PWM dimming signal.
4 VOUT input Connect resistor divider from VOUT to provide scaled feedback voltage for output regulation.
5 VREF power_out 3V ±2% reference voltage output with up to 2.1mA source capability; bypass with 100-nF ceramic capacitor.
6 IADJ input Current adjustment input with 2.54V maximum clamp for analog dimming level or thermal foldback operation.
7 COMP output Error amplifier output; connect ceramic capacitor to GND to set loop compensation.
8 GND power_in System ground reference; connect to thermal pad (DAP) for heat dissipation.
9 CS input Current sense input; connect to positive terminal of sense resistor at bottom of LED stack.
10 LG output Low-side NFET gate driver output; use series resistor to limit current slew rate and mitigate EMI noise.
11 VCC power_out 8.5V bias supply output for controller; bypass with 2.2-µF ceramic capacitor rated 10V or greater.
12 BOOT power_out Bootstrapped gate drive supply output; connect 100-nF capacitor to switch node and Schottky diode to VCC.
13 SW output Switch node output; connect to inductor and low-side NFET drain of buck regulator.
14 HG output High-side NFET gate driver output; use series resistor to limit current slew rate and mitigate EMI noise.
15 DAP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category LED Drivers
Pins 15

CAD (KiCad official)

  • Symbol: TPS92640PWPR
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: tps92640pwpr-etched.step / tps92640pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92640pwpr.step / tps92640pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 213e3a6db0ea6712, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF