Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA1632DR

Texas Instruments · Operational Amplifier · SOIC-8

OPA1632DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN- input Negative (inverting) differential input voltage pin of the fully differential op-amp.
2 VOCM input Output common-mode control voltage pin. Sets the DC common-mode level of the differential outputs; typically driven from the ADC's VCOM reference.
3 V+ power_in Positive supply voltage pin. Operating range ±2.5 V to ±15 V (dual supply) referenced to V-.
4 VOUT+ output Positive (non-inverted) differential output voltage pin.
5 VOUT- output Negative (inverted) differential output voltage pin.
6 V- power_in Negative supply voltage pin. Operating range ±2.5 V to ±15 V (dual supply) referenced to V+; may be tied to ground for single-supply operation.
7 Enable input Active-high enable pin. Drive high to enable normal operation; drive low to place the amplifier in shutdown (0.85 mA typical at ±5 V supplies).
8 VIN+ input Positive (non-inverting) differential input voltage pin of the fully differential op-amp.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • OPA1632DRD
  • OPA1632DRDGN

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS -16.5 16.5 V 6
Input offset voltage VOS -3 0.5 3 mV 8
Input offset current IOS -500 100 500 nA 8
Input bias current IB 7.9 14 μA 8
Power supply rejection ratio PSRR 13 316 μV/V vs power supply, dc 8
Common-mode rejection ratio CMRR 74 90 dB dc 8
Open-loop gain AOL 66 78 dB dc 8
Short-circuit current, sourcing ISC 50 85 mA Sourcing 9
Short-circuit current, sinking ISC -60 -85 mA Sinking 9
Quiescent current IQ 13 17.1 mA 9
Output current IO 150 mA 6
Continuous input current IIN 10 mA 6
Differential input voltage VID -1.5 1.5 V 6
Supply turn on and turn off dV/dT 1.7 V/µs 6
Junction temperature TJ 150 °C 6
Ambient temperature (absolute maximum) TA -40 85 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage, dual VS 2.5 15 V Dual 6
Supply voltage, single VS 5 30 V Single 6
Ambient temperature (recommended) TA -40 85 °C 6
Junction-to-ambient thermal resistance RθJA 126.3 °C/W D (SOIC) 8-pin package 6
Junction-to-case (top) thermal resistance RθJC(top) 67.3 °C/W D (SOIC) 8-pin package 6
Junction-to-board thermal resistance RθJB 69.8 °C/W D (SOIC) 8-pin package 6
Junction-to-top characterization parameter ψJT 19.5 °C/W D (SOIC) 8-pin package 6
Junction-to-board characterization parameter ψJB 69 °C/W D (SOIC) 8-pin package 6

CAD (KiCad official)

  • Symbol: OPA1632DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa1632dr-etched.step / opa1632dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa1632dr.step / opa1632dr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
opa1632dr.step 122 KB You want the bare part, or you mark your own boards.
opa1632dr-etched.step 2.0 MB You want the part with OPA1632DR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 496 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 03a2635985385ae7, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF