Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430G2955IRHA40R

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-40-EP(6x6)

MSP430G2955IRHA40R from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVSS power_in Digital ground reference.
2 XOUT/P2.7 bidirectional Output terminal of the crystal oscillator, also general-purpose digital I/O P2.7.
3 XIN/P2.6 bidirectional Input terminal of the crystal oscillator, also general-purpose digital I/O P2.6.
4 DVSS power_in Digital ground reference.
5 RST/NMI/SBWTDIO input Reset or nonmaskable interrupt input; also Spy-Bi-Wire test data input/output during programming and test.
6 P2.0/TA1CLK/ACLK/A0 bidirectional General-purpose digital I/O; also Timer1_A TACLK input, ACLK output, and ADC10 analog input A0.
7 P2.1/TA0INCLK/SMCLK/A1 bidirectional General-purpose digital I/O; also Timer_A INCLK clock input, SMCLK output, and ADC10 analog input A1.
8 P2.2/TA0.0/A2 bidirectional General-purpose digital I/O; also Timer_A CCI0B input or BSL receive, compare OUT0 output, and ADC10 analog input A2.
9 P3.0/UCB0STE/UCA0CLK/A5 bidirectional General-purpose digital I/O; also USCI_B0 slave transmit enable, USCI_A0 clock input/output, and ADC10 analog input A5.
10 P3.1/UCB0SIMO/UCB0SDA bidirectional General-purpose digital I/O; also USCI_B0 slave in/master out in SPI mode and I2C data in I2C mode.
11 P3.2/UCB0SOMI/UCB0SCL bidirectional General-purpose digital I/O; also USCI_B0 slave out/master in in SPI mode and I2C clock in I2C mode.
12 P3.3/UCB0CLK/UCA0STE bidirectional General-purpose digital I/O; also USCI_B0 clock input/output and USCI_A0 slave transmit enable.
13 AVSS power_in Analog ground reference.
14 AVCC power_in Analog supply voltage.
15 P4.0/TB0.0/CA0 bidirectional General-purpose digital I/O; also Timer_B CCI0A input, compare OUT0 output, and Comparator_A+ CA0 input.
16 P4.1/TB0.1/CA1 bidirectional General-purpose digital I/O; also Timer_B CCI1A input, compare OUT1 output, and Comparator_A+ CA1 input.
17 P4.2/TB0.2/CA2 bidirectional General-purpose digital I/O; also Timer_B CCI2A input, compare OUT2 output, and Comparator_A+ CA2 input.
18 P4.3/TB0.0/A12/CA3 bidirectional General-purpose digital I/O; also Timer_B CCI0B input, compare OUT0 output, ADC10 analog input A12, and Comparator_A+ CA3 input.
19 P4.4/TB0.1/A13/CA4 bidirectional General-purpose digital I/O; also Timer_B CCI1B input, compare OUT1 output, ADC10 analog input A13, and Comparator_A+ CA4 input.
20 P4.5/TB0.2/A14/CA5 bidirectional General-purpose digital I/O; also Timer_B compare OUT2 output, ADC10 analog input A14, and Comparator_A+ CA5 input.
21 P4.6/TB0OUTH/A15/CA6 bidirectional General-purpose digital I/O; also Timer_B high-impedance control for TB0 to TB3 outputs, Comparator_A+ output, ADC10 analog input A15, and Comparator_A+ CA6 input.
22 P4.7/TB0CLK/CA7 bidirectional General-purpose digital I/O; also Timer_B TBCLK clock input, Comparator_A+ output, and Comparator_A+ CA7 input.
23 P3.4/UCA0TXD/UCA0SIMO bidirectional General-purpose digital I/O; also USCI_A0 transmit data output in UART mode and slave in/master out in SPI mode.
24 P3.5/UCA0RXD/UCA0SOMI bidirectional General-purpose digital I/O; also USCI_A0 receive data input in UART mode and slave out/master in in SPI mode.
25 P3.6/TA1.1/A6 bidirectional General-purpose digital I/O; also Timer_A capture CCI1B input or BSL receive, compare OUT2 output, and ADC10 analog input A6.
26 P3.7/TA1.2/A7 bidirectional General-purpose digital I/O; also Timer_A capture CCI2B input or BSL receive, compare OUT2 output, and ADC10 analog input A7.
27 P2.3/TA0.1/A3/VREF-/VEREF- bidirectional General-purpose digital I/O; also Timer_A CCI1B input, compare OUT1 output, ADC10 analog input A3, and negative reference voltage output or input.
28 P2.4/TA0.2/A4/VREF+/VEREF+ bidirectional General-purpose digital I/O; also Timer_A compare OUT2 output, ADC10 analog input A4, and positive reference voltage output or input.
29 P1.0/TA0CLK/ADC10CLK bidirectional General-purpose digital I/O; also Timer_A clock input TACLK and ADC10 conversion clock.
30 P1.1/TA0.0 bidirectional General-purpose digital I/O; also Timer_A capture CCI0A input, compare OUT0 output, or BSL transmit.
31 P1.2/TA0.1 bidirectional General-purpose digital I/O; also Timer_A capture CCI1A input and compare OUT1 output.
32 P1.3/TA0.2 bidirectional General-purpose digital I/O; also Timer_A capture CCI2A input and compare OUT2 output.
33 P1.4/SMCLK/TCK bidirectional General-purpose digital I/O; also SMCLK signal output and JTAG test clock input for device programming and test.
34 P1.5/TA0.0/TMS bidirectional General-purpose digital I/O; also Timer_A compare OUT0 output and JTAG test mode select input.
35 P1.6/TA0.1/TDI/TCLK bidirectional General-purpose digital I/O; also Timer_A compare OUT1 output and JTAG test data input and test clock input.
36 P1.7/TA0.2/TDO/TDI bidirectional General-purpose digital I/O; also Timer_A compare OUT2 output and JTAG test data output or input during programming and test.
37 TEST/SBWTCK input Selects test mode for JTAG pins on Port 1; also Spy-Bi-Wire test clock input during programming and test.
38 DVCC power_in Digital supply voltage.
39 DVCC power_in Digital supply voltage.
40 P2.5/TA1.0/ROSC bidirectional General-purpose digital I/O; also Timer_A capture CCI0B input or BSL receive, compare OUT0 output, and input for external DCO resistor to define DCO frequency.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-40-EP(6x6)
Category Embedded Processors & Controllers
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage during program execution VCC 1.8 3.6 V During program execution 19
Supply voltage during flash programming or erase VCC 2.2 3.6 V During flash programming or erase 19
Operating free-air temperature TA -40 85 °C 19
Processor frequency (maximum MCLK frequency) fSYSTEM 6 MHz VCC = 1.8 V, duty cycle 50% ± 10% 19
Processor frequency (maximum MCLK frequency) fSYSTEM 12 MHz VCC = 2.7 V, duty cycle 50% ± 10% 19
Processor frequency (maximum MCLK frequency) fSYSTEM 16 MHz VCC = 3.3 V, duty cycle 50% ± 10% 19
Voltage applied at VCC to VSS -0.3 4.1 V 19
Voltage applied to any pin -0.3 V Maximum printed as VCC + 0.3 V; all voltages referenced to VSS 19
Diode current at any device pin -2 2 mA 19
Storage temperature range, Tstg (unprogrammed device) Tstg -55 150 °C Unprogrammed device 19
Storage temperature range, Tstg (programmed device) Tstg -55 150 °C Programmed device 19
Active mode current at 1 MHz IAM,1MHz 350 450 µA fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, VCC = 3 V 20
Low-power mode 3 current, LFXT1 clock ILPM3,LFXT1 1 1.5 µA 25°C, VCC = 2.2 V, fACLK = 32768 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 21
Low-power mode 3 current, VLO clock ILPM3,VLO 0.5 0.7 µA 25°C, VCC = 2.2 V, fACLK from VLO, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 21
Low-power mode 4 current ILPM4 0.1 0.5 µA 25°C, VCC = 2.2 V, fACLK = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 21
Low-power mode 4 current ILPM4 1.6 2.5 µA 85°C, VCC = 2.2 V, fACLK = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 21
Positive-going input threshold voltage VIT+ 1.35 2.25 V VCC = 3 V, Schmitt-trigger inputs Px 22
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V, Schmitt-trigger inputs Px 22
Input voltage hysteresis (VIT+, VIT-) Vhys 0.3 1 V VCC = 3 V 22
Pullup or pulldown resistor RPull 20 35 50 kΩ 3 V; pullup VIN = VSS, pulldown VIN = VCC 22
High-impedance leakage current Ilkg(Px.y) -50 50 nA 3 V 22
Port output frequency with load fPx.y 12 MHz Px.y, CL = 20 pF, RL = 1 kΩ, 3 V 22
Clock output frequency fPort_CLK 16 MHz Px.y, CL = 20 pF, 3 V 22
Supply voltage for DCO, RSELx < 14 VCC 1.8 3.6 V RSELx < 14 27
Supply voltage for DCO, RSELx = 14 VCC 2.2 3.6 V RSELx = 14 27
Supply voltage for DCO, RSELx = 15 VCC 3 3.6 V RSELx = 15 27
DCO frequency (0, 0) fDCO(0,0) 0.06 0.14 MHz RSELx = 0, DCOx = 0, MODx = 0, 3 V 27
DCO frequency (0, 3) fDCO(0,3) 0.07 0.17 MHz RSELx = 0, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (6, 3) fDCO(6,3) 0.54 1.06 MHz RSELx = 6, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (7, 3) fDCO(7,3) 0.8 1.5 MHz RSELx = 7, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (12, 3) fDCO(12,3) 4.3 7.3 MHz RSELx = 12, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (13, 3) fDCO(13,3) 6 7.8 9.6 MHz RSELx = 13, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (14, 3) fDCO(14,3) 8.6 13.9 MHz RSELx = 14, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (15, 3) fDCO(15,3) 12 18.5 MHz RSELx = 15, DCOx = 3, MODx = 0, 3 V 27
DCO frequency (15, 7) fDCO(15,7) 16 26 MHz RSELx = 15, DCOx = 7, MODx = 0, 3 V 27
1-MHz tolerance overall -6 3 6 % BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, -40°C to 85°C, 1.8 V to 3.6 V, calibrated at 30°C and 3 V 28
8-MHz tolerance overall -6 3 6 % BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ, -40°C to 85°C, 2.2 V to 3.6 V, calibrated at 30°C and 3 V 28
12-MHz tolerance overall -6 3 6 % BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ, -40°C to 85°C, 2.7 V to 3.6 V, calibrated at 30°C and 3 V 28
16-MHz tolerance overall -6 3 6 % BCSCTL1 = CALBC1_16MHZ, DCOCTL = CALDCO_16MHZ, -40°C to 85°C, 3.3 V to 3.6 V, calibrated at 30°C and 3 V 28
DCO temperature drift with external resistor ROSC DT -0.1 0.1 %/°C DCOR = 1, RSELx = 4, DCOx = 3, MODx = 0, 3 V 30
VLO frequency fVLO 4 12 20 kHz -40°C to 85°C, 3 V 31
LFXT1 oscillator logic-level square-wave input frequency, LF mode fLFXT1,LF,logic 10000 32768 50000 Hz XTS = 0, XCAPx = 0, LFXT1Sx = 3, 1.8 V to 3.6 V 31
LFXT1 oscillator crystal frequency, HF mode 0 fLFXT1,HF0 0.4 1 MHz XTS = 1, LFXT1Sx = 0, 1.8 V to 3.6 V 32
LFXT1 oscillator crystal frequency, HF mode 1 fLFXT1,HF1 1 4 MHz XTS = 1, LFXT1Sx = 1, 1.8 V to 3.6 V 32
LFXT1 oscillator crystal frequency, HF mode 2 fLFXT1,HF2 2 10 MHz XTS = 1, LFXT1Sx = 2, 1.8 V to 3.6 V 32
LFXT1 oscillator crystal frequency, HF mode 2 fLFXT1,HF2 2 16 MHz XTS = 1, LFXT1Sx = 2, 3 V to 3.6 V 32
LFXT1 oscillator logic-level square-wave input frequency, HF mode 3 fLFXT1,HF,logic 0.4 10 MHz XTS = 1, LFXT1Sx = 3, 1.8 V to 3.6 V 32
Oscillator fault frequency, HF mode fFault,HF 30 300 kHz XTS = 1, LFXT1Sx = 3, 2.2 V, 3 V 32
Duty cycle, HF mode at 10 MHz 40 50 60 % XTS = 1, measured at P2.0/ACLK, fLFXT1,HF = 10 MHz, 2.2 V, 3 V 32
Duty cycle, LF mode 30 50 70 % XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz, 2.2 V 31
USCI maximum BITCLK clock frequency (UART) fmax,BITCLK 2 MHz 3 V; equals baudrate in MBaud 34
UART receive deglitch time tτ 50 100 600 ns 3 V 34
SCL clock frequency (I2C) fSCL 0 400 kHz 3 V 36
Pulse duration of spikes suppressed by input filter (I2C) tSP 50 100 600 ns 3 V 36
Offset voltage, Comparator_A+ V(offset) -10 10 mV 3 V 36
Analog supply voltage VCC 2.2 3.6 V VSS = 0 V 38
Positive built-in reference voltage VREF+ 1.41 1.5 1.59 V 3 V, IVREF+ ≤ IVREF+max, REF2_5V = 0 39
Temperature coefficient of built-in reference TCREF+ -100 100 ppm/°C IVREF+ = const with 0 mA ≤ IVREF+ ≤ 1 mA, 3 V 39

CAD (KiCad official)

  • Symbol: MSP430G2955IRHA40R
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: msp430g2955irha40r-etched.step / msp430g2955irha40r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2955irha40r.step / msp430g2955irha40r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (75 pp, sha256 79ef358a23e21191, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF