component
U2115D
Public Made by Adomby adom
UNI SEMIC Gate Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownU2115D
UNI SEMIC · Gate Drivers · SOP-8
U2115D from UNI SEMIC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low side and logic fixed supply; recommended operating range is 5 V to 20 V, with an absolute maximum of -0.3 V to 25 V. |
| 2 | HIN | input | High side driver logic input, active high; input voltage must stay between 0 and VCC and is compatible with 3.3 V, 5 V and 15 V logic. |
| 3 | LIN | input | Low side driver logic input, active high for the U2115D; input voltage must stay between 0 and VCC. |
| 4 | COM | power_in | Low side return; all voltage parameters in the datasheet are referenced to COM. |
| 5 | LO | output | Low side gate drive output; VLO must stay between 0 V and VCC, with typical peak output current of 1.0 A source and 1.2 A sink. |
| 6 | VS | power_in | High side floating supply return (offset voltage); recommended range is -6 V to 200 V, with the logic operational over -6 V to 200 V. |
| 7 | HO | output | High side gate drive output; VHO must stay between VS and VB, with typical peak output current of 1.0 A source and 1.2 A sink. |
| 8 | VB | power_in | High side floating supply; recommended range is VS + 5 V to VS + 20 V, with an absolute maximum of -0.3 V to 225 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UNI SEMIC |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High side floating absolute voltage | VB | -0.3 | 225 | V | 5 | ||
| Low side and logic fixed supply voltage | Vcc | -0.3 | 25 | V | 5 | ||
| Allowable offset supply voltage transient | dVS/dt | 55 | V/ns | 5 | |||
| Package power dissipation | PD | 0.625 | W | TA≤+25°C, SOIC-8 | 5 | ||
| Thermal resistance, junction to ambient | RthJA | 200 | °C/W | SOIC-8, board mounted, still air | 5 | ||
| Junction temperature | TJ | -35 | 150 | °C | 5 | ||
| Storage temperature | TS | -55 | 150 | °C | 5 | ||
| Lead temperature (soldering, 10 seconds) | TL | 300 | °C | soldering, 10 seconds | 5 | ||
| High side floating supply offset voltage | VS | -6 | 200 | V | 5 | ||
| Low side output voltage | VLO | 0 | V | 5 | |||
| Low side and logic fixed supply voltage | VCC | 5 | 20 | V | 5 | ||
| Logic input voltage (HIN & LIN) | VIN | 0 | V | 5 | |||
| Ambient temperature | TA | -40 | 150 | °C | 5 | ||
| Turn-on propagation delay | ton | 450 | 550 | ns | VS = 0V | 6 | |
| Turn-off propagation delay | toff | 150 | 250 | ns | VS = 90V | 6 | |
| Turn-on rise time | tr | 50 | 75 | ns | 6 | ||
| Turn-off fall time | tf | 25 | 50 | ns | 6 | ||
| Deadtime, LS turn-off to HS turn-on & HS turn-on to LS turn-off | DT | 240 | 300 | 360 | ns | 6 | |
| Delay matching, HS & LS turn-on/off | MT | 60 | ns | 6 | |||
| VCC supply under-voltage positive going threshold | VCCUV+ | 4.5 | 5.5 | V | 6 | ||
| VCC supply under-voltage negative going threshold | VCCUV- | 4.1 | 5 | V | 6 | ||
| High side VBS supply under-voltage positive going threshold | VBSUV+ | 4.95 | 5.55 | V | 6 | ||
| High side VBS supply under-voltage negative going threshold | VBSUV- | 4.9 | 5.5 | V | 6 | ||
| Offset supply leakage current | ILK | 30 | uA | VB =VS =90V | 6 | ||
| Logic “1” (HO) & Logic “0” (LO) input voltage | VIH | 2.5 | V | VCC=5V to 20V | 6 | ||
| Logic “0” input bias current | IIN- | 1 | uA | VIN=5V LIN= 0V | 6 | ||
| High level output voltage, VBIAS - VO | VOH | 100 | mV | Io = 0A | 6 | ||
| Low level output voltage, VO | VOL | 100 | mV | Io =0A | 6 | ||
| Average forward current | IF(AV) | 0.8 | A | 7 | |||
| Under-voltage lockout hysteresis (VCC) | VCCHYS | 0.3 | V | 6 | |||
| High side VBS supply under-voltage lockout hysteresis | VBSUVHS | 0.1 | V | 6 | |||
| Quiescent VCC supply current | IQCC | 70 | uA | VIN =0V or 5V | 6 | ||
| Quiescent VBS supply current | IQBS | 20 | uA | VIN =0V or 5V | 6 | ||
| Logic “0” (HO) & Logic “1” (LO) input voltage | VIL | 1.6 | V | VCC=5V to 20V | 6 | ||
| Logic “1” input bias current | IIN+ | 10 | uA | VIN=5V LIN= 0V | 6 | ||
| Peak output source current (IO+) | IO+ | 1000 | mA | IF =0.5 A; VO= 0V, VIN = VIH; PW ≤10 us | 6 | ||
| Peak output sink current (IO-) | IO- | 1200 | mA | IF =0.5 A; VO= 0V, VIN = VIH; PW ≤10 us | 6 | ||
| Reverse breakdown voltage | VBR | 200 | V | IR = 0.1mA | 7 | ||
| Maximum forward voltage drop | VF | 1.2 | V | IF =0.5 A | 7 |
CAD (KiCad official)
- Symbol:
U2115D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
u2115d-etched.step/u2115d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);u2115d.step/u2115d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UNI SEMIC datasheet (12 pp, sha256
41d7bec578bb96fe, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).