3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownICL3221ECAZ-T
RENESAS · Pre-ordered Chips · SSOP-16-208mil
ICL3221ECAZ-T from RENESAS, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active low receiver enable control. |
| 2 | C1+ | passive | External capacitor (voltage doubler) is connected to this lead. |
| 3 | V+ | power_out | Internally generated positive transmitter supply (+5.5V). |
| 4 | C1- | passive | External capacitor (voltage doubler) is connected to this lead. |
| 5 | C2+ | passive | External capacitor (voltage inverter) is connected to this lead. |
| 6 | C2- | passive | External capacitor (voltage inverter) is connected to this lead. |
| 7 | V- | power_out | Internally generated negative transmitter supply (-5.5V). |
| 8 | R1IN | input | ±15kV ESD protected, RS-232 compatible receiver input. |
| 9 | R1OUT | output | TTL/CMOS level receiver output. |
| 10 | INVALID | output | Active low output that indicates no valid RS-232 levels are present on any receiver input. |
| 11 | T1IN | input | TTL/CMOS compatible transmitter input. |
| 12 | FORCEON | input | Active high input to override automatic power-down circuitry, which keeps transmitters active (FORCEOFF must be high). |
| 13 | T1OUT | output | ±15kV ESD protected, RS-232 level (nominally ±5.5V) transmitter output. |
| 14 | GND | power_in | Ground connection. |
| 15 | VCC | power_in | System power supply input (3.0V to 5.5V). |
| 16 | FORCEOFF | input | Active low to shut down transmitters and on-chip power supply, which overrides any automatic circuitry and FORCEON. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SSOP-16-208mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | 3.3 | 5 | V | 12 | ||
| Temperature Range (ICL32xxECX) | 0 | 70 | °C | ICL32xxECX (commercial grade, applies to ICL3221ECAZ-T) | 12 | ||
| Rx Input Voltage | -15 | 15 | V | 12 | |||
| VCC to GND | -0.3 | 6 | V | 11 | |||
| V+ to GND | -0.3 | 7 | V | 11 | |||
| V- to GND | 0.3 | -7 | V | Printed as +0.3 (min) and -7 (max) | 11 | ||
| V+ to V- | 14 | V | 11 | ||||
| Input Voltages (TIN, FORCEOFF, FORCEON, EN, SHDN) | -0.3 | 6 | V | 11 | |||
| RIN Input Voltage | -28 | 28 | V | Printed as ±28 V | 11 | ||
| TOUT Output Voltage | -13.2 | 13.2 | V | Printed as ±13.2 V | 11 | ||
| ROUT, INVALID Output Voltages | -0.3 | V | Maximum printed as VCC + 0.3 (not numeric, left null) | 11 | |||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 11 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 11 | |||
| Supply Current, Automatic Power-Down | 1 | 10 | µA | 25°C; All RIN Open, FORCEON = GND, FORCEOFF = VCC (ICL3221E, ICL3223E, ICL3243E Only) | 12 | ||
| Supply Current, Power-Down | 1 | 10 | µA | 25°C; FORCEOFF = SHDN = GND (Except ICL3232E) | 12 | ||
| Supply Current, Automatic Power-Down Disabled | 0.3 | 1 | mA | 25°C; All Outputs Unloaded, FORCEON = FORCEOFF = SHDN = VCC; VCC = 3.15V, ICL3221, ICL3222, ICL3223, ICL3232 | 12 | ||
| Input Logic Threshold Low | 0.8 | V | Full; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 | |||
| Input Logic Threshold High | 2 | V | VCC = 3.3V; Full; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 | |||
| Input Logic Threshold High | 2.4 | V | VCC = 5.0V; Full; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 | |||
| Input Leakage Current | -1 | 0.01 | 1 | µA | Full; TIN, FORCEON, FORCEOFF, EN, SHDN (All but ICL3232EF); printed ±0.01 typ and ±1.0 max | 12 | |
| Output Leakage Current (Except ICL3232E) | -10 | 0.05 | 10 | µA | Full; FORCEOFF = GND or EN = VCC; printed ±0.05 typ and ±10 max | 12 | |
| Output Voltage Low | 0.4 | V | Full; IOUT = 1.6mA | 12 | |||
| Receiver Input Thresholds to Enable Transmitters | -2.7 | 2.7 | V | Full; ICL32xxE Powers Up (see Figure 6); FORCEON = GND, FORCEOFF = VCC | 12 | ||
| Receiver Input Thresholds to Disable Transmitters | -0.3 | 0.3 | V | Full; ICL32xxE Powers Down (see Figure 6); FORCEON = GND, FORCEOFF = VCC | 12 | ||
| INVALID Output Voltage Low | 0.4 | V | Full; IOUT = 1.6mA | 12 | |||
| Input Voltage Range (Receiver) | -25 | 25 | V | 25°C | 13 | ||
| Input Threshold Low | 0.6 | 1.2 | V | 25°C; VCC = 3.3V | 13 | ||
| Input Threshold Low | 0.8 | 1.5 | V | 25°C; VCC = 5.0V | 13 | ||
| Input Threshold High | 1.5 | 2.4 | V | 25°C; VCC = 3.3V | 13 | ||
| Input Threshold High | 1.8 | 2.4 | V | 25°C; VCC = 5.0V | 13 | ||
| Input Resistance | 3 | 5 | 7 | kΩ | 25°C | 13 | |
| Output Voltage Swing | -5 | 5.4 | V | Full; All Transmitter Outputs Loaded with 3kΩ to Ground; printed ±5.0 min and ±5.4 typ | 13 | ||
| Output Resistance | 300 | Ω | Full; VCC = V+ = V- = 0V, Transmitter Output = ±2V; typ printed as 10M (left null) | 13 | |||
| Output Short-Circuit Current | -60 | 35 | 60 | mA | Full; printed ±35 typ and ±60 max | 13 | |
| Output Leakage Current (Transmitter) | -25 | 25 | µA | Full; VOUT = ±12V, VCC = 0V or 3.0V to 5.5V, Automatic Power-Down or FORCEOFF = SHDN = GND | 13 | ||
| Maximum Data Rate | 250 | 500 | kbps | Full; RL = 3kΩ, CL = 1000pF, One Transmitter Switching | 13 | ||
| Transition Region Slew Rate | 4 | 30 | V/µs | 25°C; VCC = 3.3V, RL = 3kΩ to 7kΩ, measured from 3V to -3V or -3V to 3V, CL = 150pF to 2500pF | 13 | ||
| Transition Region Slew Rate | 6 | 30 | V/µs | 25°C; VCC = 3.3V, RL = 3kΩ to 7kΩ, measured from 3V to -3V or -3V to 3V, CL = 150pF to 1000pF | 13 | ||
| Receiver Threshold to Transmitters Enabled Delay (tWU) | tWU | 100 | µs | 25°C | 12 | ||
| Receiver Positive or Negative Threshold to INVALID High Delay (tINVH) | tINVH | 1 | µs | 25°C | 12 | ||
| Receiver Positive or Negative Threshold to INVALID Low Delay (tINVL) | tINVL | 30 | µs | 25°C | 13 | ||
| Receiver Propagation Delay (tPHL) | tPHL | 0.15 | µs | 25°C; Receiver Input to Receiver Output, CL = 150pF | 13 | ||
| Receiver Propagation Delay (tPLH) | tPLH | 0.15 | µs | 25°C; Receiver Input to Receiver Output, CL = 150pF | 13 | ||
| Receiver Output Enable Time | 200 | ns | 25°C; Normal Operation (Except ICL3232E) | 13 | |||
| Receiver Output Disable Time | 200 | ns | 25°C; Normal Operation (Except ICL3232E) | 13 | |||
| Transmitter Skew (tPHL to tPLH) | 100 | ns | 25°C | 13 | |||
| Receiver Skew (tPHL to tPLH) | 50 | ns | 25°C | 13 | |||
| ESD RS-232 Pins (TOUT, RIN) Human Body Model | 15 | kV | 25°C; printed ±15 | 13 | |||
| ESD IEC61000-4-2 Contact Discharge | 8 | kV | 25°C; printed ±8 | 13 | |||
| ESD IEC61000-4-2 Air Gap Discharge | 15 | kV | 25°C; printed ±15 | 13 | |||
| ESD All Other Pins Human Body Model | 2 | kV | 25°C; printed ±2 | 13 | |||
| Thermal Resistance θJA, 16 Ld SSOP Package | θJA | 135 | °C/W | Typical; component mounted on low-effective thermal conductivity test board in free air (Note 4) | 11 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | C2- External capacitor (voltage inverter) is connected to this lead TIN TTL/CMOS compatible transmitter inputs | 10 |
CAD (KiCad official)
- Symbol:
ICL3221ECAZ-T - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
icl3221ecaz-t-etched.step/icl3221ecaz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icl3221ecaz-t.step/icl3221ecaz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (39 pp, sha256
d263fc23b7ec8030, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).