3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHC32F170LATA-LQ52
XHSC · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-52(10x10)
HC32F170LATA-LQ52 from XHSC, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCAP | power_out | LDO core supply output for internal circuits only, requires an external decoupling capacitor of at least 1uF. |
| 2 | PC13 | bidirectional | General-purpose I/O with alternate functions TIM3_CH1B and LVD0 (low-voltage detector input). |
| 3 | XTLI/PC14 | input | Low-speed external crystal oscillator input (XTLI), shared with GPIO PC14; 32.768KHz crystal per the XTL section. |
| 4 | XTLO/PC15 | passive | Low-speed external crystal oscillator output (XTLO), shared with GPIO PC15. |
| 5 | XTHI/PF00 | input | High-speed external crystal oscillator input (XTHI), shared with GPIO PF00 with alternate functions I2C0_SDA and UART1_TXD; crystal range 4-32MHz. |
| 6 | XTHO/PF01 | output | High-speed external crystal oscillator output (XTHO), shared with GPIO PF01 with alternate functions I2C0_SCL, TIM4_CHB and UART1_RXD. |
| 7 | RESETB | input | Active-low reset input with an internal weak pull-up of about 80 KOhm (VIH 0.8*VCC, VIL 0.3 V max). |
| 8 | PC02 | bidirectional | GPIO with alternate functions SPI1_MISO, UART2_RXD, AIN12, VC0_INP2, VC1_INN2 and SEG25. |
| 9 | PC03 | bidirectional | GPIO with alternate functions SPI1_MOSI, UART2_TXD, AIN13, VC0_INP3, VC1_INN3 and SEG24. |
| 10 | AVSS | power_in | Analog ground for the ADC, DAC, comparators and related analog circuits. |
| 11 | AVCC | power_in | Analog power supply, which must equal DVCC (1.8 to 5.5V operating range). |
| 12 | PA00 | bidirectional | GPIO with alternate functions UART1_CTS, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA, AIN0, VC0_INP4 and SEG23. |
| 13 | PA01 | bidirectional | GPIO with alternate functions UART1_RTS, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI, AIN1 and SEG22. |
| 14 | PA02 | bidirectional | GPIO with alternate functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO, AIN2 and SEG21. |
| 15 | PA03 | bidirectional | GPIO with alternate functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA, AIN3 and SEG20. |
| 16 | PA04 | bidirectional | GPIO with alternate functions SPI0_CS, UART1_TXD, PCA_CH4, LVD_OUT, DAC_OUT, OPA_OUT0, AIN4 and SEG19. |
| 17 | PA05 | bidirectional | GPIO with alternate functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT and XTH_OUT. |
| 18 | PA06 | bidirectional | GPIO with alternate functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT and TIM3_GATE. |
| 19 | PA07 | bidirectional | GPIO with alternate functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT and TIM4_CHB. |
| 20 | PB00 | bidirectional | GPIO with alternate functions PCA_CH2, TIM3_CH1B, TIM5_CHB, RCH_OUT, RCL_OUT and PLL_OUT, and SEG13 on the LCD. |
| 21 | PB01 | bidirectional | GPIO with alternate functions PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, VC2_OUT and TCLK_OUT, and SEG12 on the LCD. |
| 22 | PB02 | bidirectional | GPIO with alternate functions PCA_ECI, TIM4_CHA, TIM1_BK, TIM0_BK and TIM2_BK, and SEG11 on the LCD. |
| 23 | PB10 | bidirectional | GPIO with alternate functions I2C1_SCL, SPI1_SCK, TIM1_CHA, TIM3_CH1A and UART1_RTS, and SEG10 on the LCD. |
| 24 | PB11 | bidirectional | GPIO with alternate functions I2C1_SDA, TIM1_CHB, TIM2_GATE, TIM6_CHA and UART1_CTS, and SEG9 on the LCD. |
| 25 | DVSS | power_in | Digital ground, which must be connected to the system ground. |
| 26 | DVCC | power_in | Digital power supply, 1.8 to 5.5V, which must equal AVCC. |
| 27 | PB12 | bidirectional | GPIO with alternate functions SPI1_CS, TIM3_BK, TIM0_BK and TIM6_CHA, and SEG8 on the LCD. |
| 28 | PB13 | bidirectional | GPIO with alternate functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, TIM1_CHA, TIM1_GATE and TIM6_CHB, and SEG7 on the LCD. |
| 29 | PB14 | bidirectional | GPIO with alternate functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA and TIM1_BK, and SEG6 on the LCD. |
| 30 | PB15 | bidirectional | GPIO with alternate functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB and TIM0_GATE, and SEG5 on the LCD. |
| 31 | PC06 | bidirectional | GPIO with alternate functions PCA_CH0, TIM4_CHA, TIM2_CHA and UART3_RXD, and SEG4 on the LCD. |
| 32 | PC07 | bidirectional | GPIO with alternate functions PCA_CH1, TIM5_CHA, TIM2_CHB and UART3_TXD, and SEG3 on the LCD. |
| 33 | PA08 | bidirectional | GPIO with alternate functions UART0_TXD, TIM3_CH0A, TIM1_GATE, TIM4_CHA and TIM3_BK, and SEG0 on the LCD. |
| 34 | PA09 | bidirectional | GPIO with alternate functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT and TIM5_CHA, and COM0 on the LCD. |
| 35 | PA10 | bidirectional | GPIO with alternate functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT and TIM6_CHA, and COM1 on the LCD. |
| 36 | PA11 | bidirectional | GPIO with alternate functions UART0_CTS, TIM3_GATE, I2C1_SCL, VC0_OUT, SPI0_MISO and TIM4_CHB, and COM2 on the LCD. |
| 37 | PA12 | bidirectional | GPIO with alternate functions UART0_RTS, TIM3_ETR, I2C1_SDA, VC1_OUT and SPI0_MOSI, and COM3 on the LCD. |
| 38 | PA13/SWDIO | bidirectional | GPIO with alternate functions IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR and VC2_OUT; serves as the SWD debug data pin. |
| 39 | PF06 | bidirectional | GPIO with alternate functions I2C1_SCL and UART0_CTS. |
| 40 | PF07 | bidirectional | GPIO with alternate functions I2C1_SDA and UART0_RTS. |
| 41 | PA14/SWCLK | bidirectional | GPIO with alternate functions UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT; serves as the SWD clock pin. |
| 42 | PA15 | bidirectional | GPIO with alternate functions SPI0_CS, UART1_RXD, TIM0_ETR, TIM0_CHA and TIM3_CH1A. |
| 43 | PB03 | bidirectional | GPIO with alternate functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, XTL_OUT and XTH_OUT. |
| 44 | PB04 | bidirectional | GPIO with alternate functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE and TIM3_CH0B. |
| 45 | PB05 | bidirectional | GPIO with alternate functions SPI0_MOSI, TIM1_BK, PCA_CH1 and UART0_RTS. |
| 46 | PB06 | bidirectional | GPIO with alternate functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA and TIM3_CH0A. |
| 47 | PB07 | bidirectional | GPIO with alternate functions I2C0_SDA, UART0_RXD, TIM2_CHB and TIM0_CHB. |
| 48 | BOOT0 | input | Boot mode select (PF11 per the text): high at reset enters ISP programming mode, low at reset enters user mode executing Flash code. |
| 49 | PB08 | bidirectional | GPIO with alternate functions I2C0_SCL, TIM1_CHA, TIM2_CHA, TIM0_GATE, TIM3_CH2A and UART0_TXD. |
| 50 | PB09 | bidirectional | GPIO with alternate functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, TIM2_CHB and UART0_RXD, and SEG28 on the LCD. |
| 51 | DVSS | power_in | Digital ground, which must be connected to the system ground. |
| 52 | DVCC | power_in | Digital power supply, 1.8 to 5.5V, which must equal AVCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XHSC |
| Package | LQFP-52(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 52 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage VCC-VSS (including AVCC and DVCC) | VCC - VSS | -0.3 | 5.5 | V | 47 | ||
| Total current through DVCC/AVCC supply lines | IVCC | 300 | mA | 47 | |||
| Total current through VSS ground line | IVSS | 300 | mA | 47 | |||
| Output sink current, any I/O and control pin | IIO | 25 | mA | 47 | |||
| Output source current, any I/O and control pin | IIO | -25 | mA | 47 | |||
| Injection current on RESETB pin | IINJ(PIN) | -5 | 5 | mA | 47 | ||
| Injection current on XTHI and XTLI pins | IINJ(PIN) | -5 | 5 | mA | 47 | ||
| Injection current on other pins | IINJ(PIN) | -5 | 5 | mA | 47 | ||
| Total injection current on all I/O and control pins | ∑IINJ(PIN) | -25 | 25 | mA | 47 | ||
| LVD detection threshold tolerance, nominal 1.8V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0000 | 51 | |
| LVD detection threshold tolerance, nominal 1.9V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0001 | 51 | |
| LVD detection threshold tolerance, nominal 2.0V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0010 | 51 | |
| LVD detection threshold tolerance, nominal 2.1V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0011 | 51 | |
| LVD detection threshold tolerance, nominal 2.2V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0100 | 51 | |
| LVD detection threshold tolerance, nominal 2.3V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0101 | 51 | |
| LVD detection threshold tolerance, nominal 2.4V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0110 | 51 | |
| LVD detection threshold tolerance, nominal 2.5V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=0111 | 51 | |
| LVD detection threshold tolerance, nominal 2.6V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1000 | 51 | |
| LVD detection threshold tolerance, nominal 2.7V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1001 | 51 | |
| LVD detection threshold tolerance, nominal 2.8V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1010 | 51 | |
| LVD detection threshold tolerance, nominal 2.9V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1011 | 51 | |
| LVD detection threshold tolerance, nominal 3.0V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1100 | 51 | |
| LVD detection threshold tolerance, nominal 3.1V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1101 | 51 | |
| LVD detection threshold tolerance, nominal 3.2V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1110 | 51 | |
| LVD detection threshold tolerance, nominal 3.3V | Vlevel | -3.5 | 3.5 | % | LVD_CR.VTDS=1111 | 51 | |
| Internal 2.5V reference voltage | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温25°C 3.3V | 52 |
| Internal 2.5V reference voltage | VREF25 | 2.463 | 2.5 | 2.525 | V | -40 |
52 |
| Internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温25°C 3.3V | 52 |
| Internal 1.5V reference voltage | VREF15 | 1.477 | 1.5 | 1.519 | V | -40 |
52 |
| IDD run in Flash, RCH clock source 4M | IDD | 1000 | 1440 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, RCH clock source 8M | IDD | 1890 | 2710 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, RCH clock source 16M | IDD | 3710 | 5160 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, RCH clock source 22.12M | IDD | 5010 | 7010 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, RCH clock source 24M | IDD | 5400 | 7570 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH4M, 16M | IDD | 3930 | 5000 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH4M, 24M | IDD | 5480 | 7090 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH4M, 32M, FlashWait=1 | IDD | 6590 | 7650 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH4M, 40M, FlashWait=1 | IDD | 8100 | 9470 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH4M, 48M, FlashWait=1 | IDD | 9610 | 11200 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH8M, 16M | IDD | 3990 | 5040 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH8M, 24M | IDD | 5530 | 7140 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH8M, 32M, FlashWait=1 | IDD | 6640 | 7690 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH8M, 40M, FlashWait=1 | IDD | 8160 | 9480 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run in Flash, PLL from RCH8M, 48M, FlashWait=1 | IDD | 9670 | 11250 | uA | All peripherals ON, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 52 | |
| IDD run while(1) in Flash, all peripherals OFF, RCH 4M | IDD | 610 | 1000 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, RCH 8M | IDD | 1090 | 1840 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, RCH 16M | IDD | 2080 | 3360 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, RCH 22.12M | IDD | 2770 | 4480 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, RCH 24M | IDD | 2970 | 4810 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, PLL from RCH4M, 16M | IDD | 2290 | 3150 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, PLL from RCH4M, 24M | IDD | 3060 | 4370 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, PLL from RCH4M, 32M, FlashWait=1 | IDD | 3410 | 4030 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 | |
| IDD run while(1) in Flash, all peripherals OFF, PLL from RCH4M, 40M, FlashWait=1 | IDD | 4110 | 4950 | uA | All peripherals OFF, Run while(1) in Flash, VCAP=1.5V, VCC=1.8-5.5V, TA=-40~85C | 53 |
CAD (KiCad official)
- Symbol:
HC32F170LATA-LQ52 - Footprint:
Package_QFP:LQFP-52_10x10mm_P0.65mm - 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
- 3D model files:
hc32f170lata-lq52-etched.step/hc32f170lata-lq52-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc32f170lata-lq52.step/hc32f170lata-lq52.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XHSC datasheet (95 pp, sha256
3cd2507c5784a35b, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).