component
OPA2889IDGSR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2889IDGSR
Texas Instruments · Operational Amplifier · VSSOP-10-0.5mm
OPA2889IDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +In A | input | Noninverting input of channel A, with input voltage range limited to ±VS. |
| 2 | DIS A | input | Active-low disable control for channel A; left open or held HIGH for normal operation, pulled LOW to disable the amplifier and put the output in high impedance (Enable ≥3.3V, Disable ≤1.2V at +25°C). |
| 3 | -VS | power_in | Negative supply pin, with total supply specified from ±1.3V to ±6V dual or +2.6V to +12V single, absolute maximum ±6.5V. |
| 4 | DIS B | input | Active-low disable control for channel B; left open or held HIGH for normal operation, pulled LOW to disable the amplifier and put the output in high impedance (Enable ≥3.3V, Disable ≤1.2V at +25°C). |
| 5 | +In B | input | Noninverting input of channel B, with input voltage range limited to ±VS. |
| 6 | -In B | input | Inverting input of channel B, with input voltage range limited to ±VS. |
| 7 | Out B | output | Output of channel B, delivering about ±40mA drive current (±4V swing at ±5V supplies) and high impedance when disabled. |
| 8 | +VS | power_in | Positive supply pin, with total supply specified from ±1.3V to ±6V dual or +2.6V to +12V single, absolute maximum ±6.5V. |
| 9 | Out A | output | Output of channel A, delivering about ±40mA drive current (±4V swing at ±5V supplies) and high impedance when disabled. |
| 10 | -In A | input | Inverting input of channel A, with input voltage range limited to ±VS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Operational Amplifier/Comparator |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small-Signal Bandwidth (G=+2V/V) | 32 | 60 | MHz | VS=±5V; G=+2V/V, VO=100mVPP | 3 | ||
| Small-Signal Bandwidth (G=+10V/V) | 4.5 | 8 | MHz | VS=±5V; G=+10V/V, VO=100mVPP | 3 | ||
| Gain Bandwidth Product | 45 | 75 | MHz | VS=±5V; G > +20V/V | 3 | ||
| Slew Rate | 150 | 250 | V/µs | VS=±5V; G=+2V/V, VO=2V Step | 3 | ||
| Input Voltage Noise | 8.4 | 12 | nV/√Hz | VS=±5V; f > 100kHz | 3 | ||
| Input Current Noise | 0.7 | 1.4 | pA/√Hz | VS=±5V; f > 100kHz | 3 | ||
| Open-Loop Voltage Gain | AOL | 57 | 66 | dB | VS=±5V; VO=0V, RL=100Ω | 3 | |
| Input Offset Voltage | -6.3 | 1.5 | 6.3 | mV | VS=±5V; VCM=0V | 3 | |
| Input Bias Current | -880 | 150 | 880 | nA | VS=±5V; VCM=0V | 3 | |
| Input Offset Current | -235 | 50 | 235 | nA | VS=±5V; VCM=0V | 3 | |
| Common-Mode Input Range | CMIR | -3.6 | 3.9 | V | VS=±5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 58 | 70 | dB | VS=±5V; VCM=0V, Input-referred | 3 | |
| Output Voltage Swing (no load) | -3.7 | 4 | V | VS=±5V; No load | 4 | ||
| Output Voltage Swing (RL=100Ω) | -2.85 | 3.3 | V | VS=±5V; RL=100Ω | 4 | ||
| Output Current, Sourcing, Sinking | -22 | 40 | mA | VS=±5V; VO=0V | 4 | ||
| Power-Down Supply Current (+VS) | 36 | 55 | µA | VS=±5V; VDIS=0, both channels | 4 | ||
| Enable Voltage | 3.55 | 3.3 | V | VS=±5V | 4 | ||
| Disable Voltage | 1.2 | 0.85 | V | VS=±5V | 4 | ||
| Control Pin Input Bias Current (VDIS) | 15 | 35 | µA | VS=±5V; VDIS=0V, each channel | 4 | ||
| Maximum Operating Voltage | -6 | 6 | V | VS=±5V | 4 | ||
| Maximum Quiescent Current | 0.92 | 1.1 | mA | VS=±5V; both channels | 4 | ||
| Minimum Quiescent Current | 0.7 | 0.92 | mA | VS=±5V; both channels | 4 | ||
| Power-Supply Rejection Ratio (+PSRR) | +PSRR | 60 | 64 | dB | VS=±5V; +VS = 4.5V to 5.5V | 4 | |
| Power-Supply Rejection Ratio (-PSRR) | -PSRR | 70 | 74 | dB | VS=±5V; -VS = -4.5V to -5.5V | 4 | |
| Small-Signal Bandwidth (G=+2V/V) | 22 | 50 | MHz | VS=+5V; G=+2V/V, VO=100mVPP | 5 | ||
| Small-Signal Bandwidth (G=+10V/V) | 4 | 7 | MHz | VS=+5V; G=+10V/V, VO=100mVPP | 5 | ||
| Gain Bandwidth Product | 40 | 70 | MHz | VS=+5V; G > +20V/V | 5 | ||
| Slew Rate | 100 | 200 | V/µs | VS=+5V; G=+2V/V, VO=2V Step | 5 | ||
| Input Voltage Noise | 8.5 | 12.5 | nV/√Hz | VS=+5V; f > 100kHz | 5 | ||
| Input Current Noise | 0.7 | 1.2 | pA/√Hz | VS=+5V; f > 100kHz | 5 | ||
| Open-Loop Voltage Gain | AOL | 55 | 64 | dB | VS=+5V; VO=0V, RL=100Ω | 5 | |
| Input Offset Voltage | -6.3 | 1.5 | 6.3 | mV | VS=+5V; VCM=0V | 5 | |
| Input Bias Current | -930 | 150 | 930 | nA | VS=+5V; VCM=0V | 5 | |
| Input Offset Current | -285 | 50 | 285 | nA | VS=+5V; VCM=0V | 5 | |
| Most Positive Input Voltage | 3.75 | 4 | V | VS=+5V | 5 | ||
| Least Positive Input Voltage | 1 | 1.25 | V | VS=+5V | 5 | ||
| Common-Mode Rejection Ratio | CMRR | 56 | 68 | dB | VS=+5V; VCM=0V, Input-referred | 5 | |
| Most Positive Output Voltage (no load) | 3.7 | 4 | V | VS=+5V; No load | 6 | ||
| Most Positive Output Voltage (RL=100Ω) | 3.55 | 3.85 | V | VS=+5V; RL=100Ω | 6 | ||
| Least Positive Output Voltage (no load) | 1 | 1.3 | V | VS=+5V; No load | 6 | ||
| Least Positive Output Voltage (RL=100Ω) | 1.15 | 1.45 | V | VS=+5V; RL=100Ω | 6 | ||
| Output Current, Sourcing, Sinking | -18 | 35 | mA | VS=+5V; VO=0V | 6 | ||
| Power-Down Supply Current (+VS) | 36 | 55 | µA | VS=+5V; VDIS=0, both channels | 6 | ||
| Enable Voltage | 3.55 | 3.3 | V | VS=+5V | 6 | ||
| Disable Voltage | 1.2 | 0.85 | V | VS=+5V | 6 | ||
| Control Pin Input Bias Current (VDIS) | 15 | 35 | µA | VS=+5V; VDIS=0V, each channel | 6 | ||
| Maximum Operating Voltage | 12 | V | VS=+5V | 6 | |||
| Maximum Quiescent Current | 0.85 | 1.05 | mA | VS=+5V; both channels | 6 | ||
| Minimum Quiescent Current | 0.65 | 0.85 | mA | VS=+5V; both channels | 6 | ||
| Power Supply | -6.5 | 6.5 | V | 2 | |||
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 260 | °C | soldering, 10s | 2 | |||
| Maximum Junction Temperature (TJ) | TJ | 150 | °C | 2 | |||
| Maximum Junction Temperature, continuous operation | TJ | 140 | °C | continuous operation | 2 | ||
| ESD Rating, Human Body Model (HBM) | 2000 | V | HBM | 2 | |||
| ESD Rating, Charge Device Model (CDM) | 1000 | V | CDM | 2 | |||
| Specified Operating Temperature Range | -40 | 85 | °C | D and DGS packages | 4 | ||
| Thermal Resistance, θJA (DGS MSOP-10) | θJA | 135 | °C/W | Junction-to-ambient, DGS MSOP-10 | 4 |
CAD (KiCad official)
- Symbol:
OPA2889IDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
opa2889idgsr-etched.step/opa2889idgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2889idgsr.step/opa2889idgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
17a7b90f16de2883, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).