3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV3214QPWRQ1
Texas Instruments · Integrated Circuits (ICs) · TSSOP-14_4.4x5mm_P0.65mm
TLV3214QPWRQ1 from Texas Instruments, in a TSSOP-14_4.4x5mm_P0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of channel A comparator (push-pull output on TLV321x-Q1). |
| 2 | IN1- | input | Inverting input of channel A. |
| 3 | IN1+ | input | Noninverting input of channel A. |
| 4 | V+ | power_in | Positive (highest) supply; supply range 1.8V to 5.5V relative to V-. |
| 5 | IN2+ | input | Noninverting input of channel B. |
| 6 | IN2- | input | Inverting input of channel B. |
| 7 | OUT2 | output | Output of channel B comparator. |
| 8 | OUT3 | output | Output of channel C comparator. |
| 9 | IN3- | input | Inverting input of channel C. |
| 10 | IN3+ | input | Noninverting input of channel C. |
| 11 | V- | power_in | Negative (lowest) supply or ground for single-supply operation. |
| 12 | IN4+ | input | Noninverting input of channel D. |
| 13 | IN4- | input | Inverting input of channel D. |
| 14 | OUT4 | output | Output of channel D comparator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14_4.4x5mm_P0.65mm |
| Category | Integrated Circuits (ICs) |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 6.5 | V | VS = (V+) - (V-) | 6 | ||
| Differential input voltage | VID | -6 | 6 | V | 6 | ||
| Input pins voltage (IN+, IN-) from (V-) | -0.5 | 0.5 | V | Printed range: (V-) - 0.5 to (V+) + 0.5; max is the 0.5 V excess above (V+) | 6 | ||
| Current into input pins | -10 | 10 | mA | IN+, IN- | 6 | ||
| Output voltage from (V-) | -0.5 | 0.5 | V | Printed range: (V-) - 0.5 to (V+) + 0.5; max is the 0.5 V excess above (V+) | 6 | ||
| Output short-circuit current | -100 | 100 | mA | 6 | |||
| Output short-circuit duration | 10 | s | 6 | ||||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, AEC Q100-002 | 6 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged-device model, AEC Q100-011 | 6 | |
| Supply voltage | VS | 1.8 | 5.5 | V | VS = (V+) - (V-) | 6 | |
| Input voltage range | -0.2 | 0.2 | V | Printed range: (V-) - 0.2 to (V+) + 0.2; values are offsets from the rails | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 114.8 | °C/W | PW (TSSOP) 14 pins | 7 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 49.9 | °C/W | PW (TSSOP) 14 pins | 7 | ||
| Junction-to-board thermal resistance | RθJB | 70.7 | °C/W | PW (TSSOP) 14 pins | 7 | ||
| Junction-to-top characterization parameter | ΨJT | 5.8 | °C/W | PW (TSSOP) 14 pins | 7 | ||
| Junction-to-board characterization parameter | ΨJB | 70 | °C/W | PW (TSSOP) 14 pins | 7 | ||
| Input offset voltage | VIO | -6 | 6 | mV | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 8 | |
| Input offset voltage | VIO | -1 | 1 | mV | VS = 5V, VCM = VS / 2 | 8 | |
| Input offset voltage drift | dVOS/dT | 1 | µV/°C | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 8 | ||
| Hysteresis | VHYS | 1.8 | mV | VS = 5V, VCM = VS / 2 | 8 | ||
| Hysteresis | VHYS | 4 | mV | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 8 | ||
| Input bias current | IB | 1 | 5 | pA | VS = 5V, VCM = VS / 2 | 8 | |
| Input bias current | IB | 1200 | pA | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 8 | ||
| Input offset current | IOS | 0.1 | 2.5 | pA | VS = 5V, VCM = VS / 2 | 8 | |
| Input offset current | IOS | 250 | pA | VS = 5V, VCM = VS / 2, TA = -40 to 125℃ | 8 | ||
| Input capacitance | CIN | 1.5 | pF | 8 | |||
| Input differential mode resistance | RDM | 1600 | GΩ | 8 | |||
| Input common mode resistance | RCM | 550 | GΩ | 8 | |||
| Common-mode rejection ratio | CMRR | 76 | dB | VCM = (V-) - 0.2 to (V+) + 0.2 | 8 | ||
| Voltage swing from (V+) | VOH | 135 | 165 | mV | VS = 5V, ISource = 4mA (push-pull only) | 8 | |
| Voltage swing from (V+) | VOH | 200 | mV | VS = 5V, ISource = 4mA, -40 to 125C (push-pull only) | 8 | ||
| Voltage swing from (V-) | VOL | 120 | 160 | mV | VS = 5V, ISink = 4mA | 8 | |
| Voltage swing from (V-) | VOL | 180 | mV | VS = 5V, ISink = 4mA, -40 to 125C | 8 | ||
| Supply current / Channel (QUAD), output low | IQ | 42 | 48 | uA | VS = 2.7V and 5V, no load, VID = -0.1V (Output Low), -40 to 125C | 8 | |
| Supply current / Channel (DUAL and QUAD), output high | IQ | 44 | 60 | uA | VS = 2.7V and 5V, no load, VID = +0.1V (Output High), TA = -40 to 125℃ | 8 | |
| Power-On Reset Voltage (positive) | VPOR | 1.65 | V | 8 | |||
| Power Supply Rejection Ratio | PSRR | 77 | dB | VS = 1.8V to 5.5V, no load, VID = +0.1V, TA = -40 to 125℃ | 8 | ||
| Propagation delay, high to low | tPHL | 34 | 40 | ns | Midpoint of input to midpoint of output, VOD = 100mV | 9 | |
| Propagation delay, high to low | tPHL | 50 | ns | Midpoint of input to midpoint of output, VOD = 100mV, -40 to 125℃ | 9 | ||
| Propagation delay, high to low | tPHL | 42 | ns | Midpoint of input to midpoint of output, VOD = 50mV | 9 | ||
| Propagation delay, high to low | tPHL | 56 | ns | Midpoint of input to midpoint of output, VOD = 20mV | 9 | ||
| Propagation delay, low to high | tPLH | 32 | 39 | ns | Midpoint of input to midpoint of output, VOD = 100mV (push-pull only) | 9 | |
| Propagation delay, low to high | tPLH | 50 | ns | Midpoint of input to midpoint of output, VOD = 100mV, -40 to 125℃ (push-pull only) | 9 | ||
| Propagation delay, low to high | tPLH | 39 | ns | Midpoint of input to midpoint of output, VOD = 50mV (push-pull only) | 9 | ||
| Propagation delay, low to high | tPLH | 54 | ns | Midpoint of input to midpoint of output, VOD = 20mV (push-pull only) | 9 | ||
| Propagation delay skew | tPD Skew | 3.5 | ns | Absolute difference between tPDLH and tPDHL, VOD = 100mV (push-pull only) | 9 | ||
| Channel-to-channel propagation delay skew | tPD ch-ch skew | 1.3 | ns | VCM = VS/2, VOVERDRIVE = VUNDERDRIVE = 50mV, 10MHz Squarewave | 9 | ||
| Input toggle frequency | fTOGGLE | 12 | MHz | VIN = 200mVPP Sine Wave, output high reaches 90% of (V+) - (V-) or output low reaches 10% of (V+) - (V-) | 9 | ||
| Rise time | tR | 1.5 | ns | Measured from 20% to 80% (for push-pull only) | 9 | ||
| Fall time | tF | 1.5 | ns | Measured from 20% to 80% | 9 | ||
| Power-up time | tON | 32 | µs | During power on, (V+) must exceed 1.65V for 32µs before the output reflects the input | 9 |
CAD (KiCad official)
- Symbol:
TLV3214QPWRQ1 - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14_4.4x5mm_P0.65mm (KiCad packages3D, STEP)
- 3D model files:
tlv3214qpwrq1-etched.step/tlv3214qpwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3214qpwrq1.step/tlv3214qpwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
95094cfb986a81b0, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).