3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM339DRG
HANSCHIP semiconductor · Comparators · SOP-14
LM339DRG from HANSCHIP semiconductor, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | output | Output of comparator 2; saturation voltage is 130 mV typical and 400 mV maximum at ISINK ≤ 4.0 mA, and absolute maximum output current (ISC) is 50 mA. |
| 2 | OUT1 | output | Output of comparator 1; saturation voltage is 130 mV typical and 400 mV maximum at ISINK ≤ 4.0 mA, and absolute maximum output current (ISC) is 50 mA. |
| 3 | Vcc | power_in | Positive supply pin; recommended supply is 3 to 32 V (single supply) or ±1.5 to ±16 V (dual supply), with absolute maximum 36 V or ±18 V. |
| 4 | IN1(-) | input | Inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 5 | IN1(+) | input | Non-inverting input of comparator 1; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 6 | IN2(-) | input | Inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 7 | IN2(+) | input | Non-inverting input of comparator 2; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 8 | IN3(-) | input | Inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 9 | IN3(+) | input | Non-inverting input of comparator 3; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 10 | IN4(-) | input | Inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 11 | IN4(+) | input | Non-inverting input of comparator 4; recommended input common-mode range is (V-) - 0.1 V to (V+) - 2 V, and absolute maximum common-mode range is -0.3 V to Vcc. |
| 12 | GND | power_in | Ground (0 V) reference pin for the device. |
| 13 | OUT4 | output | Output of comparator 4; saturation voltage is 130 mV typical and 400 mV maximum at ISINK ≤ 4.0 mA, and absolute maximum output current (ISC) is 50 mA. |
| 14 | OUT3 | output | Output of comparator 3; saturation voltage is 130 mV typical and 400 mV maximum at ISINK ≤ 4.0 mA, and absolute maximum output current (ISC) is 50 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-14 |
| Category | Operational Amplifier/Comparator |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | -7 | 3 | 7 | mV | 3 | |
| Input offset current | IIO | -50 | 5 | 50 | nA | 3 | |
| Input bias current | IIB | 25 | 250 | nA | 3 | ||
| Input common-mode voltage range | VICR | 0 | V | Vcc-1.5 printed as max, not numeric | 3 | ||
| Supply current | Icc | 0.8 | 2 | mA | RL=∞ | 3 | |
| Supply current | Icc | 1 | 2.5 | mA | RL=∞,Vcc=30V | 3 | |
| Voltage gain | Gv | 50 | 200 | V/mV | RL ≥15K,Vcc=15V | 3 | |
| Large signal response time | tRES | 300 | ns | VIN=TTL 逻辑摆幅,VREF=1.4V,VRL=5.0V, RL=5.1K | 3 | ||
| Response time | tRES | 1.3 | ns | VRL=5.0V, RL=5.1K | 3 | ||
| Output sink current | ISINK | 6 | 16 | mA | VIN(-)≥1.0V,VIN(+)=0V,Vo ≤1.5V | 3 | |
| Output saturation voltage | VSAT | 130 | 400 | mV | VIN(-)≥ 1.0V,VIN(+)=0V,ISINK ≤4.0mA | 3 | |
| Output leakage current | IOL | 0.1 | nA | VIN(+)≥1.0V,VIN(-)=0V,Vo=5.0V | 3 | ||
| Supply voltage absolute maximum | Vcc | 36 | V | Single supply; dual supply ±18 V | 2 | ||
| Differential input voltage range | VIDR | 36 | V | 2 | |||
| Common-mode input voltage range | VICMR | -0.3 | V | Upper limit printed as Vcc | 2 | ||
| Output current | ISC | 50 | mA | 2 | |||
| Power dissipation | PD | 1 | W | Derate 8 mW per °C above 25°C | 2 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 2 | ||
| Lead temperature | TLEAD | 245 | ℃ | 10 s soldering | 2 | ||
| Supply voltage | Vcc | 3 | 32 | V | Dual supply ±1.5 to ±16 V | 3 | |
| Operating ambient temperature | Tamb | 0 | 70 | ℃ | LM339 | 3 |
CAD (KiCad official)
- Symbol:
LM339DRG - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm339drg-etched.step/lm339drg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm339drg.step/lm339drg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (9 pp, sha256
bcf990502f11af7e, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).