component
ADS7884SDBVR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS7884SDBVR
Texas Instruments · Analog To Digital Converters (ADC) · SOT-23-6
ADS7884SDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input from 2.7 V to 5.5 V; also acts as reference voltage for the ADC. |
| 2 | GND | power_in | Ground for power supply and reference for all analog and digital signals. |
| 3 | VIN | power_in | Analog signal input with unipolar input range 0 V to VDD and full-scale input voltage span equal to VDD. |
| 4 | SCLK | input | Serial clock input with maximum frequency of 40 MHz at VDD = 3 V and 48 MHz at VDD = 5 V. |
| 5 | SDO | tri_state | Serial data output with tri-state drivers that goes to high-impedance state when CS is high. |
| 6 | CS | input | Chip select signal active low; conversion cycle begins with falling edge of CS and input signal sampling is initiated. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
ADS7884SDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ads7884sdbvr-etched.step/ads7884sdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads7884sdbvr.step/ads7884sdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
afe0d815e7e6a337, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).