component
LM2853MHX-1.2
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM2853MHX-1.2
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM2853MHX-1.2 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | power_in | Input voltage supply for control circuitry operating from 3V to 5.5V |
| 2 | EN | input | Enable control input, internally pulled up to AVIN voltage |
| 3 | SGND | power_in | Low noise ground for signal circuits |
| 4 | SS | input | Soft-start capacitor node, 1nF to 50nF capacitor range |
| 5 | NC | unconnected | No connect pin, must be tied to ground |
| 6 | PVIN | power_in | Input voltage supply for power FETs operating from 1.5V to 5.5V |
| 7 | PVIN | power_in | Input voltage supply for power FETs operating from 1.5V to 5.5V |
| 8 | SW | output | Switch node output to inductor and output filter capacitor |
| 9 | SW | output | Switch node output to inductor and output filter capacitor |
| 10 | PGND | power_in | Power ground, low impedance connection to ground plane |
| 11 | PGND | power_in | Power ground, low impedance connection to ground plane |
| 12 | NC | unconnected | No connect pin, must be tied to ground |
| 13 | NC | unconnected | No connect pin, must be tied to ground |
| 14 | SNS | input | Output voltage sense input for feedback control from 200kΩ divider network |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Supply Chip |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM2853MHX-1.2 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm2853mhx-1-2-etched.step/lm2853mhx-1-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2853mhx-1-2.step/lm2853mhx-1-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
df92f91bdfe52be8, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).