component
LP2951ACMM-3.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLP2951ACMM-3.0
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8-0.65mm
LP2951ACMM-3.0 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage of the LP2951-N; ESD rated ±2500 V HBM. |
| 2 | SENSE | input | Output voltage sense input, which the 8-pin test conditions tie to OUT; ESD rated ±1500 V HBM. |
| 3 | SHUTDOWN | input | Logic-controlled shutdown input that disables the device, with electrical characteristics specified at VSHUTDOWN ≤ 0.8 V and an absolute maximum of -0.3 V to 30 V; ESD rated ±2000 V HBM. |
| 4 | GND | power_in | Ground reference pin for the regulator; ESD rated ±2500 V HBM. |
| 5 | ERROR | output | Error flag output that warns of output dropout, with an absolute maximum of -0.3 V to 30 V and ESD rated ±2500 V HBM. |
| 6 | VTAP | output | Internal resistor divider tap that the 8-pin test conditions tie to FEEDBACK; ESD rated ±1000 V HBM. |
| 7 | FEEDBACK | input | Voltage feedback input for programming the output voltage, with an absolute maximum of -1.5 V to 30 V and ESD rated ±1000 V HBM. |
| 8 | IN | power_in | Input supply voltage with a recommended range of 2.3 V to 30 V, an absolute maximum of -0.3 V to 30 V, and ESD rated ±2500 V HBM. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LP2951ACMM-3.0 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lp2951acmm-3-0-etched.step/lp2951acmm-3-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2951acmm-3-0.step/lp2951acmm-3-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (62 pp, sha256
b9e1f8851a20b9c9, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).