component
AP5724WG-7
Public Unreviewedby Ray
Diodes Incorporated LED Drivers, SOT-26. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP5724WG-7
Diodes Incorporated · LED Drivers · SOT-26
AP5724WG-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch pin. Connect the boost inductor and Schottky diode here. Internal NMOS power switch (Rds(on) ≈ 0.95Ω typ, 1.2Ω max) rated to 34V. Minimize trace area to reduce EMI. |
| 2 | GND | power_in | Device ground return. |
| 3 | FB | input | Feedback pin. Regulates to a 0.1V reference (0.09-0.11V). Connect the cathode of the lowest LED and the current-set resistor here; RSET = 0.1V / ILED. |
| 4 | EN | input | Converter On/Off control. VIH ≥ 1.5V turns the converter on; VIL ≤ 0.4V turns it off. Cannot be left floating; tie to VIN for automatic startup. Pin pull-low current ≈ 4µA (6µA max). PWM dimming input. |
| 5 | OVP | input | Output over-voltage detect input. Trips at 30V typ (26V min / 34V max) to protect the switch and output stage from open-LED-string conditions. Rated to 35V absolute maximum. |
| 6 | VIN | power_in | Input supply pin. Operating range 2.7V-5.5V (7V absolute max). Bypass locally with a 1µF or 2.2µF ceramic capacitor to reduce input noise. UVLO ≈ 2.2V typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | LED-drv |
| Pins | 6 |
Ordering variants
AP5724WG-7AP5724WG-7WUG-7AP5724WG-7FDCG-7
CAD (KiCad official)
- Symbol:
AP5724WG-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap5724wg-7.step |
97 KB | You want the bare part, or you mark your own boards. |
ap5724wg-7-etched.step |
1.6 MB | You want the part with AP5724WG-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 408 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (15 pp, sha256
a25375af2d3813d7, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).