component
BQ79600PWRQ1
Public Made by Adomby adom
Texas Instruments Battery Management, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ79600PWRQ1
Texas Instruments · Battery Management · TSSOP-16
BQ79600PWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVDD | power_out | 1.8V regulated output for internal digital circuits requiring 0.22-0.47µF bypass capacitor to GND. |
| 2 | NFAULT | tri_state | Open-drain active-low fault output requiring 100kΩ pull-up to VIO or connection to GND when unused. |
| 3 | VIO | power_in | 3.135-5.25V power supply for UART/SPI logic that must power up before SCLK, nCS, RX/MOSI, TX/MISO, NFAULT and require 0.1µF bypass. |
| 4 | RX/MOSI | input | UART receiver or SPI master-out-slave-in input requiring 10-100kΩ pull-up to VIO and must not be left floating. |
| 5 | TX/MISO | output | UART transmitter or SPI slave-in-master-out output driving high in idle mode and requiring 10-100kΩ MCU-side pull-up. |
| 6 | SCLK | input | SPI clock input requiring 10-100kΩ pull-down to GND or direct GND connection when unused. |
| 7 | nCS | input | SPI active-low chip select requiring 10-100kΩ pull-up to VIO in SPI mode and cannot be hardwired to GND. |
| 8 | nUART/SPI (SPI_RDY) | bidirectional | Mode selection input (GND for UART, VIO pull-up for SPI) before device wakeup that functions as SPI_RDY output after initialization. |
| 9 | GND | power_in | Ground reference for all circuits. |
| 10 | COMLP | bidirectional | AC-coupled bidirectional daisy-chain I/O (low channel, positive) with no external DC allowed and requiring isolation to adjacent device. |
| 11 | COMLN | bidirectional | AC-coupled bidirectional daisy-chain I/O (low channel, negative) with no external DC allowed and requiring isolation to adjacent device. |
| 12 | COMHN | bidirectional | AC-coupled bidirectional daisy-chain I/O (high channel, negative) with no external DC allowed and requiring isolation to adjacent device. |
| 13 | COMHP | bidirectional | AC-coupled bidirectional daisy-chain I/O (high channel, positive) with no external DC allowed and requiring isolation to adjacent device. |
| 14 | CVDD | power_out | 5V daisy-chain supply from internal LDO requiring 0.22-0.47µF decouple capacitor to GND. |
| 15 | BAT | power_in | 5.5-40V unregulated battery supply for internal LDOs connected through 10Ω resistor with 0.1µF bypass to GND. |
| 16 | INH | tri_state | PMOS open-drain inhibit output requiring 100kΩ pull-down to GND or connection to BAT pin when reverse-wakeup not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
BQ79600PWRQ1 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
bq79600pwrq1-etched.step/bq79600pwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq79600pwrq1.step/bq79600pwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (71 pp, sha256
cc4b93840add73f9, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).