3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOC5121
OCX · LED Drivers · SOT-23-6
OC5121 from OCX, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DRV | output | Gate drive output that connects to the external MOSFET gate, with 50 ns typical rise and fall times into a 500 pF load. |
| 2 | VSS | power_in | Ground pin for the controller; the RCS sense-resistor and VSS traces should be kept short and thick to limit parasitic resistance errors in output current. |
| 3 | NC | unconnected | Not connected; the datasheet specifies that this pin is left unconnected (不接). |
| 4 | VDD | power_in | Chip supply pin fed through an external resistor RVDD, with an internal regulator clamp of 5.8 V (maximum clamp current 10 mA), undervoltage lockout at 4.1 V, and an absolute maximum rating of 6 V. |
| 5 | HL | input | Brightness-mode select: floating or grounded selects high-brightness mode, while a high level selects low-brightness mode with half the LED current; an internal 80 kΩ pulldown is fitted. |
| 6 | CS | input | Inductor peak-current sense input across RCS, regulated to a 200 mV average-current threshold (192 to 208 mV), which also serves as the linear dimming input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OCX |
| Package | SOT-23-6 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CS sense threshold voltage (average current sense) | VCS_TH | 192 | 200 | 208 | mV | 4 | |
| VDD maximum voltage | VDD | 6 | V | 3 | |||
| HL, DRV and CS pin voltage | VMAX | -0.3 | V | Upper limit printed as VDD+0.3 V | 3 | ||
| Package maximum power dissipation, SOT23-6 | PSOT23-6 | 0.3 | W | 3 | |||
| Operating temperature range | TA | -40 | 85 | oC | 3 | ||
| Storage temperature range | TSTG | -40 | 120 | oC | 3 | ||
| Soldering temperature range | TSD | 240 | oC | 时间小于30秒 | 3 | ||
| ESD withstand voltage (human body model) | VESD | 2000 | V | 人体模型 | 3 | ||
| Input voltage range | 8 | 150 | V | 1 | |||
| VDD clamp voltage | VDD | 5.8 | V | IVDD<10mA | 4 | ||
| VDD undervoltage lockout threshold | VDD_UVLO | 4.1 | V | VDD 上升 | 4 | ||
| VDD undervoltage lockout hysteresis | VDD_HYS | 0.4 | V | 4 | |||
| Operating current | IOP | 1.6 | mA | 4 | |||
| Standby input current | IINQ | 500 | uA | 无负载 | 4 | ||
| HL pin pull-down resistance | RHL | 80 | Kohm | 4 | |||
| Oscillator frequency | FOSC | 140 | KHZ | 4 | |||
| DRV rise time | TRISE | 50 | ns | DRV 脚接 500pF 电容 | 4 | ||
| DRV fall time | TFALL | 50 | ns | DRV 脚接 500pF 电容 | 4 | ||
| Over-temperature regulation threshold | OTP_TH | 140 | oC | 4 |
CAD (KiCad official)
- Symbol:
OC5121 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
oc5121-etched.step/oc5121-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);oc5121.step/oc5121.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OCX datasheet (7 pp, sha256
2ec1db95fbccb980, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).