component
RS8411BPXF
Public Made by Adomby adom
Jiangsu RUNIC Tech Operational Amplifier, SOT23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS8411BPXF
Jiangsu RUNIC Tech · Operational Amplifier · SOT23-5
RS8411BPXF from Jiangsu RUNIC Tech, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input; the common-mode input range runs from 100mV below V- to 2V below V+ at VS=±18V. |
| 2 | V- | power_in | Negative (lowest) power supply or ground, used for single-supply operation; supply range is 3V to 36V single-supply or ±1.5V to ±18V dual-supply. |
| 3 | -IN | input | Negative (inverting) input; input signals more than 0.2V beyond the supply rails should be current-limited to 10mA or less. |
| 4 | OUT | output | Output, rail-to-rail; output signals more than 0.2V beyond the supply rails should be current-limited to ±100mA or less. |
| 5 | V+ | power_in | Positive (highest) power supply; the supply voltage is (V+) - (V-), with an absolute maximum of 36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, Vs=(V+)-(V-) | Vs | -0.7 | 36 | V | 8 | ||
| Signal input pin current | -10 | 10 | mA | 8 | |||
| Signal output pin current | -100 | 100 | mA | 8 | |||
| Operating range, TA | TA | -40 | 125 | °C | Free-air | 8 | |
| Junction temperature, TJ | TJ | -40 | 150 | °C | 8 | ||
| Storage temperature, Tstg | Tstg | -55 | 150 | °C | 8 | ||
| Supply voltage, single-supply | Vs | 3 | 36 | V | Single-supply, Vs=(V+)-(V-) | 8 | |
| Supply voltage, dual-supply | Vs | 1.5 | 18 | V | Dual-supply, printed as ±1.5 (min) and ±18 (max) | 8 | |
| Operating Voltage Range | VS | 3 | 36 | V | 25°C | 9 | |
| Quiescent Current Per Amplifier | IQ | 150 | 350 | μA | VS=±2.5V, Io=0mA, 25°C | 9 | |
| Quiescent Current Per Amplifier | IQ | 200 | 450 | μA | VS=±18V, Io=0mA | 9 | |
| Power-Supply Rejection Ratio | PSRR | 95 | 120 | dB | VS=5V to 36V, 25°C | 9 | |
| Input Offset Voltage | Vos | -4 | 0.5 | 4 | mV | VCM=VS/2, 25°C | 9 |
| Input Offset Voltage | Vos | -1.1 | 1.1 | mV | VCM=VS/2, Full temperature range | 9 | |
| Input Offset Voltage Average Drift | Vos Tc | 3 | μV/°C | Full temperature range | 9 | ||
| Input Bias Current | IB | 10 | 60 | pA | VCM=0V, 25°C | 9 | |
| Input Bias Current | IB | 600 | pA | VCM=0V, Full temperature range | 9 | ||
| Input Offset Current | IOS | 10 | 60 | pA | VCM=0V, 25°C | 9 | |
| Input Offset Current | IOS | 600 | pA | VCM=0V, Full temperature range | 9 | ||
| Common-Mode Rejection Ratio | CMRR | 70 | 110 | dB | VS=±2.5V, VCM=(V-)-0.1V to (V+)-2V, 25°C | 9 | |
| Common-Mode Rejection Ratio | CMRR | 70 | dB | VS=±18V, VCM=(V-)-0.1V to (V+)-2V, 25°C | 9 | ||
| Open-Loop Voltage Gain | AOL | 83 | 115 | dB | RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, 25°C | 9 | |
| Short-circuit current | ISC | 35 | 80 | mA | 25°C | 9 | |
| Capacitive load drive | CLOAD | 100 | pF | 25°C | 9 | ||
| Setting Time, 0.01% | ts | 5 | μs | VS=±2.5V, G=+1, CL=100pF, Step=2V, 25°C | 9 | ||
| Overload Recovery Time | tOR | 5 | μs | VIN·Gain≥VS, G=11, 25°C | 9 | ||
| Turn On Time | tON | 10 | μs | 25°C | 9 | ||
| Output Swing high | VOH | 17.85 | V | VS=±18V, RL=10KΩ, 25°C | 9 | ||
| Output Swing low | VOL | -17.85 | V | VS=±18V, RL=10KΩ, 25°C | 9 | ||
| Slew Rate | SR | 0.67 | V/μs | G=+1, CL=100pF, 25°C | 9 | ||
| Gain-Bandwidth Product | GBW | 1.2 | MHz | 25°C | 9 | ||
| Input Voltage Noise (0.1Hz to 10Hz) | En | 16 | μVpp | f = 0.1Hz to 10Hz, VS=±2.5V, 25°C | 9 | ||
| Input Voltage Noise Density | en | 45 | nV/√Hz | f = 1KHz, 25°C | 9 | ||
| Package thermal impedance, SOT23-5 | θJA | 230 | °C/W | SOT23-5, per JESD-51 | 8 |
CAD (KiCad official)
- Symbol:
RS8411BPXF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
rs8411bpxf-etched.step/rs8411bpxf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8411bpxf.step/rs8411bpxf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (19 pp, sha256
c83b07a99693d156, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).