Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TC1187VCT713

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5

TC1187VCT713 from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated supply input; the TC1187 operates from 2.7 V to 6.0 V input, and a 1 µF capacitor from VIN to ground is recommended for most applications.
2 GND power_in Ground terminal, which must connect the input supply return and the negative sides of the 1 µF input and output capacitors close to the pin.
3 SHDN input Shutdown control input: a logic high (at or above 45% of VIN minimum) enables the regulator, a logic low (at or below 15% of VIN maximum) shuts it down, and supply current drops to 0.5 µA maximum in shutdown.
4 ADJ input Output voltage adjust terminal, connected to a resistor divider from VOUT; the divider resistors should be between 470 kΩ and 3 MΩ and the adjust leakage current is typically 50 pA.
5 VOUT power_out Regulated voltage output, rated for a maximum output current of 150 mA for the TC1187, with the output capacitor placed as close to the pin as possible.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 6 V Note 6 2
Maximum Output Current (TC1187) IOUTmax 150 mA TC1187 2
Adjustable Output Voltage Range VOUT 5.5 V 2
Reference Voltage VREF 1.165 1.2 1.235 V 2
Line Regulation VOUT/VIN 0.05 0.35 % (VR + 1V) VIN 6V 2
Load Regulation (TC1187) VOUT/VOUT 0.5 3 % IL = 0.1 mA to IOUTmax 2
Dropout Voltage VIN-VOUT 120 mV IL = 50 mA 3
Dropout Voltage VIN-VOUT 250 mV TC1071, TC1187; IL = 100 mA 3
Dropout Voltage VIN-VOUT 400 mV TC1187; IL = 150 mA 3
Supply Current IIN 50 80 µA SHDN = VIH, IL = 0 3
Shutdown Supply Current IINSD 0.05 0.5 µA SHDN = 0V 3
Output Short Circuit Current IOUTSC 300 450 mA VOUT = 0V 3
SHDN Input High Threshold VIH 45 %VIN VIN = 2.5V to 6.5V 3
SHDN Input Low Threshold VIL 15 %VIN VIN = 2.5V to 6.5V 3
Input Voltage (absolute maximum) 6.5 V 2
Output Voltage (absolute range) -0.3 V Printed as (-0.3V) to (VIN + 0.3V); upper limit is VIN-dependent, not a number 2
Maximum Voltage on Any Pin (absolute range) -0.3 V Printed as VIN + 0.3V to -0.3V; upper limit is VIN-dependent, not a number 2
Operating Temperature Range (junction) TJ -40 125 °C -40°C < TJ < 125°C 2
Storage Temperature -65 150 °C 2
Thermal Resistance, 5L-SOT-23 (junction-to-air) JA 256 °C/W 3

CAD (KiCad official)

  • Symbol: TC1187VCT713
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tc1187vct713-etched.step / tc1187vct713-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc1187vct713.step / tc1187vct713.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (17 pp, sha256 aa964b848029af8c, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF