Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2901QDRG4Q1

Texas Instruments · Comparators · SOIC-14

LM2901QDRG4Q1 from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of comparator 2, maximum current 20 mA.
2 OUT2 output Output of comparator 1, maximum current 20 mA.
3 VCC power_in Positive power supply, operating range 2V to 30V.
4 IN2- input Negative input of comparator 1, voltage range -0.3V to 36V.
5 IN2+ input Positive input of comparator 1, voltage range -0.3V to 36V.
6 IN1- input Negative input of comparator 2, voltage range -0.3V to 36V.
7 IN1+ input Positive input of comparator 2, voltage range -0.3V to 36V.
8 IN3- input Negative input of comparator 3, voltage range -0.3V to 36V.
9 IN3+ input Positive input of comparator 3, voltage range -0.3V to 36V.
10 IN4- input Negative input of comparator 4, voltage range -0.3V to 36V.
11 IN4+ input Positive input of comparator 4, voltage range -0.3V to 36V.
12 GND power_in Ground (negative power supply).
13 OUT4 output Output of comparator 4, maximum current 20 mA.
14 OUT3 output Output of comparator 3, maximum current 20 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (LM2901-Q1) VCC 2 30 V LM2901-Q1 (non-V devices) 6
Ambient temperature TA -40 125 °C 6
Output current (per comparator) IO 0 4 mA 6
Supply voltage VCC 36 V Absolute maximum 5
Differential input voltage VID -36 36 V Differential voltage at IN+ with respect to IN− 5
Input voltage range (either input) VI -0.3 36 V 5
Output voltage VO 36 V 5
Output current IO 20 mA 5
Operating virtual junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input offset voltage VIO 2 7 mV VIC = VICR(min), VO = 1.4V, VCC = 5V to MAX(3); TA = 25°C 8
Input offset voltage VIO 15 mV VIC = VICR(min), VO = 1.4V, VCC = 5V to MAX(3); TA = full range 8
Input offset current IIO 5 50 nA VO = 1.4V; TA = 25°C 8
Input offset current IIO 200 nA VO = 1.4V; TA = full range 8
Input bias current IIB -25 -250 nA VO = 1.4V; TA = 25°C 8
Input bias current IIB -500 nA VO = 1.4V; TA = full range 8
Common-mode input voltage range VICR 0 V TA = 25°C; upper limit printed as VCC − 1.5 V 8
Large-signal differential voltage amplification AVD 25 100 V/mV VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC; TA = 25°C 8
High-level output current IOH 0.1 50 nA VID = 1V, VOH = 5V; TA = 25°C 8
High-level output current IOH 1 µA VID = 1V, VOH = VCC MAX(3); TA = full range 8
Low-level output voltage VOL 150 400 mV VID = −1V, IOL = 4mA; TA = 25°C 8
Low-level output voltage VOL 700 mV VID = −1V, IOL = 4mA; TA = full range 8
Low-level output current IOL 6 16 mA VID = −1V, VOL = 1.5V; TA = 25°C 8
Supply current (four comparators) ICC 0.8 2 mA VO = 2.5V, no load, VCC = 5V; TA = 25°C 8
Supply current (four comparators) ICC 1 2.5 mA VO = 2.5V, no load, VCC = MAX(3); TA = full range 8
Junction-to-ambient thermal resistance RθJA 111.2 °C/W D (SOIC) 14-pin package 6
Junction-to-case (top) thermal resistance RθJC(top) 66.9 °C/W D (SOIC) 14-pin package 6
Junction-to-board thermal resistance RθJB 67.8 °C/W D (SOIC) 14-pin package 6
Junction-to-top characterization parameter ψJT 28 °C/W D (SOIC) 14-pin package 6
Junction-to-board characterization parameter ψJB 67.4 °C/W D (SOIC) 14-pin package 6

CAD (KiCad official)

  • Symbol: LM2901QDRG4Q1
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lm2901qdrg4q1-etched.step / lm2901qdrg4q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2901qdrg4q1.step / lm2901qdrg4q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 1a952a1b94f81bb7, retrieved 2026-10-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF