Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SIT8008BC-73-33S-16.000000D

SiTime · Pre-programmed Oscillators · SMD2016-4P

SIT8008BC-73-33S-16.000000D from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ~{ST} input Output Enable, Standby or No Connect depending on factory programming; VIH is min 70% Vdd and VIL is max 30% Vdd, and a pull-up of 10 kΩ or less is recommended if not externally driven (in NC mode the pin has no function).
2 GND power_in Electrical ground.
3 OUT output Oscillator LVCMOS output.
4 VDD power_in Power supply voltage; a capacitor of 0.1 µF or higher between Vdd and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Vdd_3.3 Vdd_3.3 2.97 3.3 3.63 V 1
Operating Temperature Range (Extended Commercial) T_use -20 70 °C Extended Commercial 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd_3.3 1
OE Disable Current I_OD 4.2 mA Vdd_3.3. OE = GND, Output in high-Z state 1
Standby Current I_std 2.1 4.3 µA ST = GND, Vdd_3.3. Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 2
Rise/Fall Time Tr, Tf 1 2 ns 20% - 80% Vdd_3.3 2
Output High Voltage VOH 90 Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3); min printed as 90% Vdd 2
Output Low Voltage VOL 10 Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3); max printed as 10% Vdd 2
Input High Voltage VIH 70 Vdd Pin 1, OE or ST; min printed as 70% Vdd 2
Input Low Voltage VIL 30 Vdd Pin 1, OE or ST; max printed as 30% Vdd 2
Input Pull-up Impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Input Impedance, ST low Z_in 2 MΩ Pin 1, ST logic low 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_3.3 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd_3.3 2
RMS Phase Jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_3.3 2
RMS Phase Jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_3.3 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Maximum Operating Junction Temperature 80 °C Max operating ambient temperature 70°C 3
Thermal Resistance Junction-Ambient, 2016, 4 Layer Board θJA 152 °C/W 2016 package, 4 Layer Board 3
Thermal Resistance Junction-Ambient, 2016, 2 Layer Board θJA 252 °C/W 2016 package, 2 Layer Board 3
Thermal Resistance Junction-Case, 2016, Bottom θJC 36 °C/W 2016 package, Bottom 3

CAD (KiCad official)

  • Symbol: SIT8008BC-73-33S-16.000000D
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit8008bc-73-33s-16-000000d-etched.step / sit8008bc-73-33s-16-000000d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8008bc-73-33s-16-000000d.step / sit8008bc-73-33s-16-000000d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (17 pp, sha256 ea4a3c7ea2e6d0c0, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF