Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8034ARTZ-REEL7

Analog Devices · FET Input Amplifiers · SOT-23-8

AD8034ARTZ-REEL7 from Analog Devices, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT1 output Output of amplifier 1 with ±4.75 to ±4.95 V swing at ±5 V supply and rail-to-rail output capability
2 -IN1 input Inverting input of amplifier 1 with FET input, 1 pA typical input bias current, and −5.0 to +2.2 V common-mode input voltage range at ±5 V supply
3 +IN1 input Non-inverting input of amplifier 1 with FET input, 1 pA typical input bias current, and −5.0 to +2.2 V common-mode input voltage range at ±5 V supply
4 -VS power_in Negative supply voltage with operating range 5 to 24 V, serves as ground reference in single-supply mode
5 +IN2 input Non-inverting input of amplifier 2 with FET input and 1 pA typical input bias current
6 -IN2 input Inverting input of amplifier 2 with FET input and 1 pA typical input bias current
7 VOUT2 output Output of amplifier 2 with ±4.75 to ±4.95 V swing at ±5 V supply and rail-to-rail output capability
8 +VS power_in Positive supply voltage with operating range 5 to 24 V

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Slew Rate (25% to 75%) 55 80 V/μs G = +2, VOUT = 4 V step 3
−3 dB Bandwidth 65 80 MHz G = +1, VOUT = 0.2 V p-p 3
Open-Loop Gain 89 92 dB VOUT = ±3 V 3
Common-Mode Rejection Ratio -89 -100 dB VCM = −3 V to +1.5 V 3
Power Supply Rejection Ratio -90 -100 dB VS = ±2 V 3
Input Common-Mode Voltage Range (FET Input Range) -5 2.2 V 3
Output Voltage Swing 4.75 4.95 V 3
Operating Range (supply voltage) 5 24 V 3
Quiescent Current per Amplifier IS 3.3 3.5 mA 3
Input Offset Voltage VOS 1 2 mV VCM = 0 V 3
Input Offset Voltage (TMIN − TMAX) VOS 3.5 mV TMIN − TMAX 3
Input Offset Voltage Match 2.5 mV 3
Input Offset Voltage Drift 4 27 μV/°C 3
Input Bias Current IB 1.5 11 pA 3
Input Bias Current (TMIN − TMAX) IB 50 pA TMIN − TMAX 3
Output Short-Circuit Current 40 mA 3
Capacitive Load Drive 35 pF 30% overshoot, G = +1, VOUT = 400 mV p-p 3
−3 dB Bandwidth 30 MHz G = +2, VOUT = 0.2 V p-p 3
−3 dB Bandwidth 21 MHz G = +2, VOUT = 2 V p-p 3
Input Overdrive Recovery Time 135 ns −6 V to +6 V input 3
Output Overdrive Recovery Time 135 ns −3 V to +3 V input, G = +2 3
Settling Time to 0.1% 95 ns G = +2, VOUT = 2 V step 3
Settling Time to 0.1% 225 ns G = +2, VOUT = 8 V step 3
Second Harmonic Distortion -82 dBc fC = 1 MHz, VOUT = 2 V p-p, RL = 500 Ω 3
Second Harmonic Distortion -85 dBc fC = 1 MHz, VOUT = 2 V p-p, RL = 1 kΩ 3
Third Harmonic Distortion -70 dBc fC = 1 MHz, VOUT = 2 V p-p, RL = 500 Ω 3
Third Harmonic Distortion -81 dBc fC = 1 MHz, VOUT = 2 V p-p, RL = 1 kΩ 3
Crosstalk, Output-to-Output -86 dB f = 1 MHz, G = +2 3
Input Voltage Noise en 11 nV/√Hz f = 100 kHz 3
Input Current Noise in 0.7 fA/√Hz f = 100 kHz 3
Absolute Maximum Supply Voltage 26.4 V 6
Absolute Maximum Common-Mode Input Voltage 26.4 V 6
Absolute Maximum Differential Input Voltage 1.4 V 6
Storage Temperature Range TSTG -65 125 °C 6
Operating Temperature Range -40 85 °C 6
Lead Temperature (Soldering) 300 °C 10 sec soldering 6
Junction Temperature (extended period, caution level) TJ 175 °C exceeding for an extended period may change silicon devices; stated in text, not in a table 6
Thermal Resistance, Junction-to-Ambient (SOT-23-8) θJA 160 °C/W 8-lead SOT-23 package on JEDEC standard 4-layer board, still air; approximation 6

CAD (KiCad official)

  • Symbol: AD8034ARTZ-REEL7
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ad8034artz-reel7-etched.step / ad8034artz-reel7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8034artz-reel7.step / ad8034artz-reel7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 b6d8b59c94c85f9e, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF