Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC4425YN

Microchip Tech · Gate Drive ICs · PDIP-8

MIC4425YN from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected.
2 INA input Control input for driver A; the logic input withstands swing to -5V and is TTL-compatible independent of supply voltage.
3 GND power_in Ground; duplicate pins must be externally connected together, and the device survives up to 5V of noise spiking on the ground pin.
4 INB input Control input for driver B; the logic input withstands swing to -5V and is TTL-compatible independent of supply voltage.
5 OUTB output Output of driver B; the output swings within 25 mV of ground or VS and accepts up to 0.5 A reverse current (either polarity) without damage or logic upset.
6 VS power_in Supply input; operating range is 4.5 V to 18 V.
7 OUTA output Output of driver A; the output swings within 25 mV of ground or VS and accepts up to 0.5 A reverse current (either polarity) without damage or logic upset.
8 NC unconnected Not connected.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic 1 Input Voltage VIH 2.4 V 3
Logic 0 Input Voltage VIL 0.8 V 3
Input Current IIN -1 1 µA 0V ≤ VIN ≤ VS 3
Input Current (second row, bold temperature-range values) IIN -10 10 µA 3
Low Output Voltage VOL 0.025 V 3
Output Resistance HI State RO 5 Ω IOUT = 10 mA, VS = 18V 3
Output Resistance HI State RO 8 Ω VIN = 0.8V, IOUT = 10 mA, VS = 18V 3
Output Resistance LO State 5 Ω IOUT = 10 mA, VS = 18V 3
Output Resistance LO State 8 Ω VIN = 2.4V, IOUT = 10 mA, VS = 18V 3
Latch-Up Protection Withstand Reverse Current I 500 mA 3
Rise Time tR 23 35 ns Figure 1-1, CL = 1800 pF 4
Rise Time (second row, bold temperature-range values) tR 28 60 ns Figure 1-1, CL = 1800 pF 4
Fall Time tF 25 35 ns Figure 1-1, CL = 1800 pF 4
Fall Time (second row, bold temperature-range values) tF 32 60 ns Figure 1-1, CL = 1800 pF 4
Delay Time tD1 33 75 ns Figure 1-1, CL = 1800 pF 4
Delay Time (second row, bold temperature-range values) tD1 32 100 ns Figure 1-1, CL = 1800 pF 4
Delay Time tD2 38 75 ns Figure 1-1, CL = 1800 pF 4
Delay Time (second row, bold temperature-range values) tD2 38 100 ns Figure 1-1, CL = 1800 pF 4
Pulse Width tPW 400 ns Figure 1-1 4
Power Supply Current IS 2.5 mA VIN = 3.0V (both inputs) 4
Power Supply Current (second row, bold temperature-range values) IS 3.5 mA VIN = 3.0V (both inputs) 4
Power Supply Current IS 0.25 mA VIN = 0.0V (both inputs) 4
Power Supply Current (second row, bold temperature-range values) IS 0.3 mA VIN = 0.0V (both inputs) 4
Supply Voltage (operating range) VS 4.5 18 V 3
Ambient Temperature Range (Y ordering option) TA -40 85 °C Y ordering option 4
Supply Voltage (absolute maximum) 22 V 3
Input Voltage (absolute maximum) -5 V Printed as VS + 0.3V to GND, 5V; maximum is VS + 0.3V (not numeric) 3
Maximum Junction Temperature TJ(MAX) 150 °C 4
Storage Temperature Range TS -65 150 °C 4
Lead Temperature TLEAD 300 °C 4
Thermal Resistance DIP, junction to air JA 130 °C/W 4
Thermal Resistance DIP, junction to case JC 42 °C/W 4

CAD (KiCad official)

  • Symbol: MIC4425YN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: mic4425yn-etched.step / mic4425yn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4425yn.step / mic4425yn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (30 pp, sha256 e920c754c736c720, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF