component
LT6200IS8#PBF
Public Made by Adomby adom
Analog Devices Operational Amplifier, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT6200IS8#PBF
Analog Devices · Operational Amplifier · SO-8
LT6200IS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Shutdown input that disables the amplifier when pulled to 0.3V or below (VL) and enables it when at or above V+-0.5V (VH), with the pin left open for normal operation in the test conditions. |
| 2 | -IN | input | Inverting input of the op amp, with input common mode range including both supply rails. |
| 3 | +IN | input | Noninverting input of the op amp, with input common mode range including both supply rails. |
| 4 | V- | power_in | Negative supply, with total supply voltage (V+ to V-) limited to 12.6V maximum and 2.5V minimum. |
| 5 | NC | unconnected | No internal connection. |
| 6 | OUT | output | Rail-to-rail amplifier output with ±60mA minimum short-circuit current at VS = 5V. |
| 7 | V+ | power_in | Positive supply, with total supply voltage (V+ to V-) limited to 12.6V maximum and 2.5V minimum. |
| 8 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current | -40 | 40 | mA | Note 2 | 2 | ||
| Pin Current While Exceeding Supplies | -30 | 30 | mA | Note 12 | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance Junction-to-Ambient (S8) | θJA | 100 | °C/W | S8 8-Lead Plastic SO, TJMAX = 150°C | 2 | ||
| Minimum Supply Voltage | 3 | V | -40°C to 85°C, Note 6 | 5 | |||
| Input Offset Voltage | VOS | 0.2 | 1.5 | mV | VS = 5V, VCM = Half Supply, -40°C to 85°C | 5 | |
| Input Offset Voltage | VOS | 1 | 2.8 | mV | VS = 3V, VCM = Half Supply, -40°C to 85°C | 5 | |
| Input Offset Voltage | VOS | 0.3 | 3.5 | mV | VS = 5V, VCM = V+ to V-, -40°C to 85°C | 5 | |
| Input Offset Voltage | VOS | 1.5 | 4.3 | mV | VS = 3V, VCM = V+ to V-, -40°C to 85°C | 5 | |
| Input Offset Voltage Drift | VOS TC | 2.5 | 8 | µV/°C | VCM = Half Supply, -40°C to 85°C | 5 | |
| Input Bias Current | IB | -40 | -10 | µA | VCM = Half Supply, -40°C to 85°C | 5 | |
| Input Bias Current | IB | -50 | 8 | µA | VCM = V+, -40°C to 85°C | 5 | |
| Input Bias Current | IB | -23 | 18 | µA | VCM = V-, -40°C to 85°C | 5 | |
| IB Shift | ∆IB | 31 | 68 | µA | VCM = V- to V+, -40°C to 85°C | 6 | |
| Large-Signal Gain | AVOL | 40 | 70 | V/mV | VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2, -40°C to 85°C | 6 | |
| Large-Signal Gain | AVOL | 7.5 | 13 | V/mV | VS = 5V, VO = 1.5V to 3.5V, RL = 100Ω to VS/2, -40°C to 85°C | 6 | |
| Large-Signal Gain | AVOL | 11 | 20 | V/mV | VS = 3V, VO = 0.5V to 2.5V, RL = 1k to VS/2, -40°C to 85°C | 6 | |
| Common Mode Rejection Ratio | CMRR | 60 | 80 | dB | VS = 5V, VCM = V- to V+, -40°C to 85°C | 6 | |
| Common Mode Rejection Ratio | CMRR | 80 | 100 | dB | VS = 5V, VCM = 1.5V to 3.5V, -40°C to 85°C | 6 | |
| Output Voltage Swing LOW | VOL | 18 | 70 | mV | No Load, -40°C to 85°C | 6 | |
| Output Voltage Swing LOW | VOL | 60 | 120 | mV | ISINK = 5mA, -40°C to 85°C | 6 | |
| Output Voltage Swing LOW | VOL | 170 | 310 | mV | VS = 5V, ISINK = 20mA, -40°C to 85°C | 6 | |
| Output Voltage Swing LOW | VOL | 175 | 315 | mV | VS = 3V, ISINK = 20mA, -40°C to 85°C | 6 | |
| Output Voltage Swing HIGH | VOH | 65 | 120 | mV | No Load, -40°C to 85°C | 6 | |
| Output Voltage Swing HIGH | VOH | 115 | 210 | mV | ISOURCE = 5mA, -40°C to 85°C | 6 | |
| Output Voltage Swing HIGH | VOH | 270 | 450 | mV | VS = 5V, ISOURCE = 20mA, -40°C to 85°C | 6 | |
| Output Voltage Swing HIGH | VOH | 280 | 500 | mV | VS = 3V, ISOURCE = 20mA, -40°C to 85°C | 6 | |
| Supply Current per Amplifier | IS | 22 | 25.3 | mA | VS = 5V, -40°C to 85°C | 6 | |
| Supply Current per Amplifier | IS | 20 | 23 | mA | VS = 3V, -40°C to 85°C | 6 | |
| Disabled Supply Current per Amplifier | IS | 1.4 | 1.9 | mA | VSHDN = 0.3V, -40°C to 85°C | 6 | |
| SHDN Pin Current | ISHDN | 220 | 300 | µA | VSHDN = 0.3V, -40°C to 85°C | 6 | |
| Slew Rate | SR | 23 | 33 | V/µs | VS = 5V, AV = -1, RL = 1k, VO = 4V, LT6200, -40°C to 85°C | 6 | |
| Input Offset Voltage | VOS | 1.9 | 4.5 | mV | VS = ±5V, VCM = Half Supply, -40°C to 85°C | 8 | |
| Input Offset Voltage | VOS | 3.5 | 7.5 | mV | VS = ±5V, VCM = V+, -40°C to 85°C | 8 | |
| Large-Signal Gain | AVOL | 46 | 80 | V/mV | VS = ±5V, VO = ±4.5V, RL = 1k, -40°C to 85°C | 8 | |
| Large-Signal Gain | AVOL | 7.5 | 13.5 | V/mV | VS = ±5V, VO = ±2V, RL = 100Ω, -40°C to 85°C | 8 | |
| Common Mode Rejection Ratio | CMRR | 65 | 90 | dB | VS = ±5V, VCM = V- to V+, -40°C to 85°C | 8 | |
| Common Mode Rejection Ratio | CMRR | 75 | 100 | dB | VS = ±5V, VCM = -2V to 2V, -40°C to 85°C | 8 | |
| Output Voltage Swing LOW | VOL | 16 | 70 | mV | VS = ±5V, No Load, -40°C to 85°C | 8 | |
| Output Voltage Swing LOW | VOL | 60 | 120 | mV | VS = ±5V, ISINK = 5mA, -40°C to 85°C | 8 | |
| Output Voltage Swing LOW | VOL | 170 | 310 | mV | VS = ±5V, ISINK = 20mA, -40°C to 85°C | 8 | |
| Output Voltage Swing HIGH | VOH | 85 | 150 | mV | VS = ±5V, No Load, -40°C to 85°C | 8 | |
| Output Voltage Swing HIGH | VOH | 125 | 230 | mV | VS = ±5V, ISOURCE = 5mA, -40°C to 85°C | 8 | |
| Output Voltage Swing HIGH | VOH | 265 | 480 | mV | VS = ±5V, ISOURCE = 20mA, -40°C to 85°C | 8 | |
| Supply Current per Amplifier | IS | 25 | 29 | mA | VS = ±5V, -40°C to 85°C | 8 | |
| Disabled Supply Current per Amplifier | IS | 1.6 | 2.1 | mA | VSHDN = 0.3V, VS = ±5V, -40°C to 85°C | 8 | |
| SHDN Pin Current | ISHDN | 215 | 295 | µA | VSHDN = 0.3V, VS = ±5V, -40°C to 85°C | 8 | |
| Slew Rate | SR | 31 | 44 | V/µs | VS = ±5V, AV = -1, RL = 1k, VO = 4V, LT6200, -40°C to 85°C | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | metal attached to the V- pin of the device. θJA is specified for a certain amount of 2oz copper metal trace connecting to the V- pin as described in | 10 |
CAD (KiCad official)
- Symbol:
LT6200IS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt6200is8-pbf-etched.step/lt6200is8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6200is8-pbf.step/lt6200is8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
57cc8d3a65aa37f6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).