component
THS4052CDGNR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, HVSSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTHS4052CDGNR
Texas Instruments · Operational Amplifier · HVSSOP-8-EP
THS4052CDGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier channel 1, which the datasheet rates at 100 mA typical output drive with 150 mA absolute maximum output current. |
| 2 | 1IN− | input | Inverting input of amplifier channel 1, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 3 | 1IN+ | input | Non-inverting input of amplifier channel 1, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 4 | −VCC | power_in | Negative power supply pin; the recommended supply is ±4.5 V to ±16 V dual or 9 V to 32 V single, with an absolute maximum supply of ±16.5 V. |
| 5 | 2IN+ | input | Non-inverting input of amplifier channel 2, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 6 | 2IN− | input | Inverting input of amplifier channel 2, with input voltage limited to ±VCC and differential input voltage limited to ±4 V absolute maximum. |
| 7 | 2OUT | output | Output of amplifier channel 2, which the datasheet rates at 100 mA typical output drive with 150 mA absolute maximum output current. |
| 8 | VCC+ | power_in | Positive power supply pin; the recommended supply is ±4.5 V to ±16 V dual or 9 V to 32 V single, with an absolute maximum supply of ±16.5 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
THS4052CDGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
ths4052cdgnr-etched.step/ths4052cdgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths4052cdgnr.step/ths4052cdgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
d9e7ab03eda6b12b, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).