DS90LV017ATM from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VCC	power_in	Positive power supply pin, +3.3V ± 0.3V; recommended supply range is 3.0 V to 3.6 V.
2	DI1	input	TTL/CMOS driver input pin; VIH is 2.0 V minimum to VCC and VIL is 0.8 V maximum.
3	NC	unconnected	No connect pin; leave unconnected.
4	GND	power_in	Ground pin; all voltages are referenced to ground except VOD.
5	NC	unconnected	No connect pin; leave unconnected.
6	NC	unconnected	No connect pin; leave unconnected.
7	DO1+	output	Non-inverting LVDS driver output; VOD is 250 mV minimum and 450 mV maximum into a 100 Ω load (355 mV typical).
8	DO1-	output	Inverting LVDS driver output; VOD is 250 mV minimum and 450 mV maximum into a 100 Ω load (355 mV typical), complementary to DO1+.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-8
Category	Interface
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Supply Voltage (VCC) recommended	VCC	3	3.3	3.6	V		2
Temperature (TA) recommended	TA	-40	25	85	°C		2
Supply Voltage (VCC) absolute maximum	VCC	-0.3		4	V		2
Input Voltage (DI) absolute maximum	DI	-0.3		3.6	V		2
Output Voltage (DO±) absolute maximum	DO±	-0.3		3.9	V		2
Maximum Package Power Dissipation				1190	mW	@ +25°C, D Package	2
Derating above +25°C, D Package			9.5		mW/°C	above +25°C, D Package	2
Storage Temperature Range		-65		150	°C		2
Lead Temperature Range Soldering				260	°C	4 sec.	2
ESD HBM		8			kV	HBM 1.5 kΩ, 100 pF	2
ESD EIAJ		1000			V	EIAJ 0 Ω, 200 pF	2
ESD CDM		1000			V	CDM	2
ESD IEC direct		4			kV	IEC direct 330 Ω, 150 pF	2
Output Differential Voltage	VOD	250	355	450	mV	RL = 100Ω (Figure 2)	2
VOD Magnitude Change	ΔVOD		1	35	mV		2
Output High Voltage	VOH	1.4		1.6	V		2
Output Low Voltage	VOL	0.9		1.1	V		2
Offset Voltage	VOS	1.125	1.2	1.375	V		2
Offset Magnitude Change	ΔVOS	0	3	25	mV		2
Power-off Leakage	IOXD	-10	1	10	μA	VOUT = VCC or GND, VCC = 0V	2
Output Short Circuit Current	IOSD	-8		-5.7	mA		2
Input High Voltage	VIH	2			V	DI	2
Input Low Voltage	VIL			0.8	V	GND	2
Input High Current	IIH	-10	2	10	μA	VIN = 3.3V or 2.4V	2
Input Low Current	IIL	-10	1	10	μA	VIN = GND or 0.5V	2
Input Clamp Voltage	VCL	-1.5		-0.6	V	ICL = −18 mA	2
Power Supply Current	ICC		5	8	mA	No Load, VIN = VCC or GND	2
Power Supply Current with load	ICC		7	10	mA	RL = 100Ω	2
Differential Propagation Delay High to Low	tPHLD	0.3	0.8	1.5	ns	RL = 100Ω, CL = 15 pF	3
Differential Propagation Delay Low to High	tPLHD	0.3	1.1	1.5	ns	(Figure 3 and Figure 4)	3
Differential Pulse Skew	tSKD1	0	0.3	0.7	ns		3
Differential Part to Part Skew (note 6)	tSKD3	0		1	ns		3
Differential Part to Part Skew (note 7)	tSKD4	0		1.2	ns		3
Transition Low to High Time	tTLH	0.2	0.5	1	ns		3
Transition High to Low Time	tTHL	0.2	0.5	1	ns		3
Maximum Operating Frequency	fMAX	350			MHz		3

CAD (KiCad official)

Symbol: DS90LV017ATM
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)
3D model files: ds90lv017atm-etched.step / ds90lv017atm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ds90lv017atm.step / ds90lv017atm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (17 pp, sha256 c4907a948e2c5026, retrieved 2026-11-11, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

DS90LV017ATM

Verified DS90LV017ATM

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README