Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA1677DR

Texas Instruments · Audio Amplifiers · SOIC-8

OPA1677DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection; labeled NC in the OPA1677 D (SOIC-8) top view and not listed in the pin function table.
2 -IN input Inverting input; the input voltage must stay between (V-) - 0.5 V and (V+) + 0.5 V and input current is limited to ±10 mA per the absolute maximum ratings.
3 +IN input Noninverting input; the input voltage must stay between (V-) - 0.5 V and (V+) + 0.5 V and input current is limited to ±10 mA per the absolute maximum ratings.
4 V- power_in Negative (lowest) power supply; the device runs from 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply, with total supply VS = (V+) - (V-) not to exceed 40 V.
5 NC unconnected No connection; labeled NC in the OPA1677 D (SOIC-8) top view and not listed in the pin function table.
6 OUT output Amplifier output, which may be shorted to VS/2 (ground in symmetrical dual-supply setups) with continuous short-circuit current per the absolute maximum ratings.
7 V+ power_in Positive (highest) power supply; the device runs from 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply, with total supply VS = (V+) - (V-) not to exceed 40 V.
8 NC unconnected No connection; labeled NC in the OPA1677 D (SOIC-8) top view and not listed in the pin function table.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VS = (V+), (V-) VS 40 V 6
Input current (all pins except power-supply pins) -10 10 mA 6
Operating temperature TA -55 125 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage, single supply VS 4.5 36 V Single supply 6
Supply voltage, dual supply VS 2.25 18 V Dual supply 6
Operating temperature TA -40 125 °C 6
Input offset voltage VOS -2 0.5 2 mV VS = ±2.25 V to ±18 V 8
Power-supply rejection ratio PSRR 3 8 µV/V VS = ±2.25 V to ±18 V 8
Common-mode rejection ratio CMRR 100 110 dB 8
Open-loop voltage gain AOL 106 114 dB (V-) + 0.8 V ≤ VO ≤ (V+), 0.8 V 8
Quiescent current (per channel) IQ 2 2.5 mA IO = 0 A 8
Quiescent current (per channel) IQ 2.8 mA IO = 0 A, TA = -40°C to 125°C 8
Junction-to-ambient thermal resistance (D SOIC-8) RθJA 132.9 °C/W OPA1677 D (SOIC) 8-pin package 7
Junction-to-case (top) thermal resistance (D SOIC-8) RθJC(top) 74 °C/W OPA1677 D (SOIC) 8-pin package 7
Junction-to-board thermal resistance (D SOIC-8) RθJB 76.3 °C/W OPA1677 D (SOIC) 8-pin package 7
Junction-to-top characterization parameter (D SOIC-8) ψJT 24.9 °C/W OPA1677 D (SOIC) 8-pin package 7
Junction-to-board characterization parameter (D SOIC-8) ψJB 75.6 °C/W OPA1677 D (SOIC) 8-pin package 7

CAD (KiCad official)

  • Symbol: OPA1677DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa1677dr-etched.step / opa1677dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa1677dr.step / opa1677dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 4daa2a565701b83d, retrieved 2026-10-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF