component
WR0332-25A30R
Public Made by Adomby adom
Wayon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownWR0332-25A30R
Wayon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
WR0332-25A30R from Wayon, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Common ground reference for the regulator. |
| 2 | OUT | power_out | Regulated output voltage; a low-ESR capacitor, typically 1μF, is required from OUT to ground for stability, and an internal 150Ω (typical) pull-down resistor discharges VOUT when the regulator shuts down. |
| 3 | IN | power_in | Input voltage supply, with a typical 1μF bypass capacitor to GND placed as close to the IN and GND pins as possible; the rated input range is 2.2V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wayon |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage range (VOUT > 1.5V), IOUT=1mA, VIN=VOUT+1V | VOUT | 0.98 | 1.02 | VOUT multiplier (printed as 0.98 VOUT / 1.02 VOUT, unit column V) | VOUT>1.5V, IOUT=1mA | 5 | |
| Dropout voltage (VOUT=2.5V) | VDO | 280 | 420 | mV | VOUT=2.5V, IOUT=300mA | 5 | |
| Line regulation | LNR | 0.05 | 0.1 | %/V | VOUT=3.3V, VIN=4.3~5.5V, IOUT=1mA | 5 | |
| Quiescent current | IQ | 60 | 80 | μA | VOUT=3.3V, IOUT=0mA | 5 | |
| Shut-down current | ISHDN | 0.1 | 1 | μA | VEN = 0V | 5 | |
| Input voltage range | VIN | 2.2 | 5.5 | V | 4 | ||
| EN input voltage range | VEN | 0 | 5.5 | V | 4 | ||
| Nominal output voltage range | VOUT(NOMINAL) | 1 | 3.3 | V | Family range for WR0332 (not specific to 2.5V variant) | 4 | |
| Output current | IOUT | 0 | 300 | mA | 4 | ||
| Operating temperature range | TA | -40 | 125 | °C | 4 | ||
| Input voltage range (absolute) | -0.3 | 6 | V | 3 | |||
| EN input voltage range (absolute) | -0.3 | 6 | V | 3 | |||
| Output voltage range (absolute) | -0.3 | 6 | V | 3 | |||
| Maximum output current | 500 | mA | Footnote [2] (PCB per note 2) | 3 | |||
| Power dissipation PD(MAX), SOT23-3 | PD(MAX) | 681 | mW | TA = 25ºC | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature range | 260 | °C | 3 | ||||
| Storage temperature range | -55 | 150 | °C | 3 | |||
| ESD susceptibility HBM | HBM | -8000 | 8000 | V | HBM, printed ±8000 V | 3 | |
| Input capacitor (recommended) | CIN | 1 | μF | 4 | |||
| Output capacitor (recommended) | COUT | 1 | μF | 4 | |||
| Output current limit | ILIM | 500 | mA | VEN=VIN | 5 | ||
| Maximum output current in accuracy range | IOUT | 300 | mA | VEN=VIN | 5 | ||
| Short current | ISHORT | 150 | mA | VEN=VIN, VOUT short to GND | 5 | ||
| Load regulation | LDR | 15 | mV | VOUT=3.3V, IOUT=1~300mA | 5 | ||
| Power supply ripple rejection (1 kHz) | PSRR | 70 | dB | VIN=(VOUT+1V) DC+0.5VP-P, f=1kHz, IOUT=10mA, @VOUT=3.3V | 5 | ||
| Power supply ripple rejection (10 kHz) | PSRR | 55 | dB | VIN=(VOUT+1V) DC+0.5VP-P, f=10kHz, IOUT=10mA, @VOUT=3.3V | 5 | ||
| Output noise voltage | VNO | 140 | µVRMS | BW = 10Hz to 100kHz, VOUT = 3.3 V, IOUT = 10 mA, COUT=1μF | 6 | ||
| EN high voltage (enabled) | VENH | 1.2 | V | VIN=5.5V, IOUT=1mA | 6 | ||
| EN low voltage (disabled) | VENL | 0.4 | V | VIN=5.5V, IOUT=1mA | 6 | ||
| Thermal shutdown threshold | TSD | 165 | ºC | 6 | |||
| Thermal shutdown hysteresis | ΔTSD | 30 | ºC | 6 | |||
| Output discharge resistance | RDIS | 150 | Ω | VIN=4.0V, VEN=0V | 6 | ||
| Thermal resistance junction-to-ambient, SOT23-3 | RθJA | 183.3 | °C/W | 2cm x 2cm 2-layer FR4, 1 oz copper (note 2) | 3 | ||
| Thermal resistance junction-to-board, SOT23-3 | RθJB | 148.1 | °C/W | JEDEC board (note 3) | 3 | ||
| Thermal resistance junction-to-case top, SOT23-3 | RθJC | 119.2 | °C/W | Top | 3 | ||
| Thermal resistance junction-to-case bottom, SOT23-3 | RθJC | 31.75 | °C/W | Bottom | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | close as possible to their respective LDO pins. Connect the CIN and COUT grounds, with all LDO ground pins as close together as possible, through a wide copper surface. Using through-holes and long wi | 22 |
CAD (KiCad official)
- Symbol:
WR0332-25A30R - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
wr0332-25a30r-etched.step/wr0332-25a30r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wr0332-25a30r.step/wr0332-25a30r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wayon datasheet (30 pp, sha256
115200abc938e7fe, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).