Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTH7

TECH PUBLIC · Battery Management · SOT-23-5L

LTH7 from TECH PUBLIC, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHRG output Open-drain charge status output. Pulled low by an internal N-channel MOSFET during charging and goes high-impedance when charging completes or when the low-battery lockout condition is detected. With a 1 uF cap from BAT to GND, the pin also indicates battery presence (LED flashes rapidly when no battery is attached).
2 GND power_in Device ground reference.
3 BAT power_out Charge current output to the Li-ion battery. Regulates the float voltage to 4.2 V and delivers programmed charge current (up to ~500 mA). Contains an internal precision resistor divider that senses the float voltage and an ESD protection network; sourcing ~1 mA between GND and BAT if the battery is connected in reverse.
4 VCC power_in External supply input, operating range 4.3 V to 7 V (absolute max 11 V). Requires at least a 0.1-1 uF decoupling capacitor to GND. When VCC falls within 30 mV of VBAT, the chip enters sleep mode and BAT current drops below 2 uA.
5 PROG bidirectional Charge current program, monitor, and shutdown pin. A resistor from PROG to GND sets IBAT = (VPROG/RPROG) x 1000 (typical PROG voltage 1.0 V in constant-current mode; RPROG=2 kOhm -> ~500 mA, RPROG=10 kOhm -> ~100 mA). Disconnecting PROG from GND causes an internal 2.5 uA pull-up to raise the pin; crossing the ~1.0 V manual-shutdown threshold puts the charger into standby (supply current drops to ~40 uA).

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOT-23-5L
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: LTH7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: lth7-etched.step / lth7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lth7.step / lth7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (5 pp, sha256 48374b61c08beea0, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF