LT1636IMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NULL	passive	Offset null pin; a 10k potentiometer between pins 1 and 8 with wiper to V- nulls input offset voltage with a range of at least ±1mV.
2	-IN	input	Inverting input; accepts up to 44V differential and common mode, operates up to 44V above V- regardless of V+, with internal 1k series resistor protecting against excursions up to 22V below V-.
3	+IN	input	Non-inverting input; accepts up to 44V differential and common mode, operates up to 44V above V- regardless of V+, with internal 1k series resistor protecting against excursions up to 22V below V-.
4	V-	power_in	Negative supply (ground in single-supply use); total supply V+ to V- is 2.7V to 44V and the part is protected against reverse battery up to 27V.
5	SHDN	input	Shutdown pin; taking it 1.2V above V- drops supply current to about 4µA and makes the output high impedance, and it can be taken up to 32V above V- with pin current limited to ±10mA.
6	OUT	output	Rail-to-rail output that drives 18mA and is unity-gain stable up to 10,000pF with a 0.22µF and 150Ω compensation network.
7	V+	power_in	Positive supply; bypass with about 0.01µF within an inch of the pin, and total supply V+ to V- must not exceed 44V.
8	NULL	passive	Offset null pin; a 10k potentiometer between pins 1 and 8 with wiper to V- nulls input offset voltage with a range of at least ±1mV.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	MSOP-8
Category	Amplifiers
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Total Supply Voltage (V+ to V-)				44	V		2
Input Differential Voltage				44	V		2
Input Current		-25		25	mA		2
Shutdown Pin Voltage Above V-				32	V		2
Shutdown Pin Current		-10		10	mA		2
Operating Temperature Range		-40		85	°C	LT1636C/LT1636I	2
Specified Temperature Range		-40		85	°C	LT1636C/LT1636I	2
Junction Temperature	TJMAX			150	°C		2
Storage Temperature Range		-65		150	°C		2
Lead Temperature (Soldering, 10 sec)				300	°C		2
Thermal Resistance Junction-Ambient	θJA			250	°C/W	MS8 package	2
Input Offset Voltage	VOS		50	225	µV	VS = 3V, 0V; 5V, 0V; MS8 Package	2
Input Offset Voltage	VOS			700	µV	MS8 Package, 0°C ≤ TA ≤ 70°C	2
Input Offset Voltage	VOS			1050	µV	MS8 Package, -40°C ≤ TA ≤ 85°C	2
Input Offset Voltage Drift			2	10	µV/°C	MS8 Package, -40°C ≤ TA ≤ 85°C	3
Input Offset Current	IOS		0.1	0.8	nA	VS = 3V, 0V; 5V, 0V	3
Input Bias Current	IB		5	8	nA	VS = 3V, 0V; 5V, 0V	3
Input Voltage Range		0		44	V	VS = 3V, 0V; 5V, 0V	3
Common Mode Rejection Ratio	CMRR	84	110		dB	VCM = 0V to VCC, 1V	3
Common Mode Rejection Ratio	CMRR	86	98		dB	VCM = 0V to 44V (Note 8)	3
Large-Signal Voltage Gain	AVOL	200	1300		V/mV	VS = 3V, VO = 500mV to 2.5V, RL = 10k	3
Large-Signal Voltage Gain	AVOL	400	2000		V/mV	VS = 5V, VO = 500mV to 4.5V, RL = 10k	3
Large-Signal Voltage Gain	AVOL	200			V/mV	VS = 5V, -40°C ≤ TA ≤ 85°C	3
Output Voltage Swing LOW	VOL		2	10	mV	No Load	3
Output Voltage Swing LOW	VOL		480	875	mV	ISINK = 5mA	3
Output Voltage Swing LOW	VOL		860	1600	mV	VS = 5V, ISINK = 10mA	3
Output Voltage Swing HIGH	VOH	2.95	2.985		V	VS = 3V, No Load	3
Output Voltage Swing HIGH	VOH	2.55	2.8		V	VS = 3V, ISOURCE = 5mA	3
Output Voltage Swing HIGH	VOH	4.95	4.985		V	VS = 5V, No Load	3
Output Voltage Swing HIGH	VOH	4.3	4.75		V	VS = 5V, ISOURCE = 10mA	3
Short-Circuit Current	ISC	7	15		mA	VS = 3V, Short to GND	3
Short-Circuit Current	ISC	12	25		mA	VS = 5V, Short to GND	3
Power Supply Rejection Ratio	PSRR	90	103		dB	VS = 2.7V to 12.5V, VCM = VO = 1V	3
Reverse Supply Voltage		27	40		V	IS = -100µA	3
Supply Current	IS		42	55	µA	VS = 3V, 0V; 5V, 0V (Note 6)	3
Supply Current, SHDN			4	12	µA	VPIN5 = 2V, No Load (Note 6)	3
Output Leakage Current, SHDN			0.05	1	µA	VPIN5 = 2V, No Load (Note 6)	3
Maximum Shutdown Pin Current			27	150	µA	VPIN5 = 32V, No Load (Note 5)	3
Gain Bandwidth Product	GBW	110	200		kHz	f = 1kHz (Note 5)	4
Slew Rate	SR	0.035	0.07		V/µs	AV = -1, RL = ∞ (Note 7)	4
Input Offset Voltage	VOS		100	450	µV	VS = ±15V, MS8 Package	4
Input Offset Voltage	VOS			850	µV	VS = ±15V, MS8 Package, 0°C ≤ TA ≤ 70°C	4
Input Offset Voltage	VOS			1200	µV	VS = ±15V, MS8 Package, -40°C ≤ TA ≤ 85°C	4
Input Offset Voltage Drift			2	10	µV/°C	VS = ±15V, MS8 Package, -40°C ≤ TA ≤ 85°C	4
Input Offset Current	IOS		0.2	1	nA	VS = ±15V	4
Input Bias Current	IB		4	10	nA	VS = ±15V	4
Input Voltage Range		-15		29	V	VS = ±15V	4
Common Mode Rejection Ratio	CMRR	86	103		dB	VS = ±15V, VCM = -15V to 29V	4
Large-Signal Voltage Gain	AVOL	100	500		V/mV	VS = ±15V, VO = ±14V, RL = 10k	4
Output Voltage Swing LOW	VOL	-14.997	-14.95		V	VS = ±15V, No Load	4
Output Voltage Swing HIGH	VOH	14.9	14.975		V	VS = ±15V, No Load	4
Output Voltage Swing HIGH	VOH	14.3	14.65		V	VS = ±15V, ISOURCE = 10mA	4
Short-Circuit Current	ISC	18	30		mA	VS = ±15V, Short to GND (printed ±18, ±30)	5
Power Supply Rejection Ratio	PSRR	90	114		dB	VS = ±1.35V to ±22V	5
Supply Current	IS		50	70	µA	VS = ±15V	5
Positive Supply Current, SHDN			12	30	µA	VPIN5 = -20V, VS = ±22V, No Load	5
Output Leakage Current, SHDN			0.1	2	µA	VPIN5 = -20V, VS = ±22V, No Load	5
Gain Bandwidth Product	GBW	125	220		kHz	VS = ±15V, f = 1kHz	5
Slew Rate	SR	0.0375	0.075		V/µs	AV = -1, RL = ∞, VO = ±10V Measured at ±5V	5
Input Capacitance	CIN		4		pF		3

CAD (KiCad official)

Symbol: LT1636IMS8#PBF
Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
3D model: MSOP-8 (KiCad packages3D, STEP)
3D model files: lt1636ims8-pbf-etched.step / lt1636ims8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1636ims8-pbf.step / lt1636ims8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (16 pp, sha256 c1cff2013cd2e27e, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1636IMS8#PBF

Verified LT1636IMS8#PBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README