Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL3295EIHZ-T

Intersil(Renesas Electronics) · RS-485/RS-422 ICs · SOT-23-6

ISL3295EIHZ-T from Intersil(Renesas Electronics), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 DI input Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces Y high and Z low.
2 VCC power_in System power supply input, 3.0V to 5.5V; power up VCC first on devices whose VL pin is powered from a separate supply.
3 DE input Driver output enable: Y and Z are enabled when DE is high and are high impedance when DE is low; if the enable function is not needed, connect DE to VCC through a 1kΩ to 3kΩ resistor.
4 Z output Inverting RS-485/422 transmitter output, ESD protected to ±15kV HBM and ±7kV IEC61000 (contact method).
5 GND power_in Ground connection; this is the device ground reference.
6 Y output Noninverting RS-485/422 transmitter output, ESD protected to ±15kV HBM and ±7kV IEC61000 (contact method).

Key specifications

Parameter Value
Manufacturer Intersil(Renesas Electronics)
Package SOT-23-6
Category Interface ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC VCC 3 5.5 V System power supply input (pin description) 2
Operating temperature range, I suffix -40 85 °C I suffix 5
VCC to GND VCC -0.3 7 V 5
Input voltages DI, DE -0.3 7 V DI, DE 5
Output voltages Y, Z -8 13 V VCC ≤ 3.6V 5
Output voltages Y, Z -0.5 V VCC > 3.6V; upper limit printed as VCC +0.5V 5
Maximum junction temperature (plastic package) 150 °C 5
Maximum storage temperature range -65 150 °C 5
Driver differential VOUT, RS-422 load VOD 2 2.3 V RL = 100Ω (RS-422), Figure 4A; VCC ≥ 3.15V 5
Driver differential VOUT, RS-422 load VOD 3 3.8 V RL = 100Ω (RS-422), Figure 4A; VCC ≥ 4.5V 5
Driver differential VOUT, RS-485 load VOD 1.5 2 V RL = 54Ω (RS-485), Figure 4A; VCC ≥ 3.0V; max printed as VCC 5
Driver differential VOUT, RS-485 load VOD 2.5 3.4 V RL = 54Ω (RS-485), Figure 4A; VCC ≥ 4.5V; max printed as VCC 5
Driver differential VOUT with common-mode load VOD 1.5 V RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4B); typ printed as 2, 3.4 5
Change in magnitude of driver differential VOUT for complementary output states VOD 0.01 0.2 V RL = 54Ω or 100Ω (Figure 4A) 5
Driver common-mode VOUT VOC 2 3 V RL = 54Ω or 100Ω (Figure 4A); VCC ≤ 3.6V 5
Driver common-mode VOUT VOC 3.2 V RL = 54Ω or 100Ω (Figure 4A); VCC ≤ 5.5V 5
Change in magnitude of driver common-mode VOUT for complementary output states VOC 0.01 0.2 V RL = 54Ω or 100Ω (Figure 4A) 5
Input high voltage (DI, DE) VIH1 2.2 V VL = VCC; VCC ≤ 3.6V 5
Input high voltage (DI, DE) VIH2 3 V VCC ≤ 5.5V 5
Input low voltage (DI, DE) VIL1 0.8 V VL = VCC (printed for ISL3296E/97E/98E) 6
Logic input current IIN -2 2 µA DI = DE = 0V or VCC (Note 11) 6
Output leakage current (Y, Z) IOZ 0.1 40 µA DE = 0V, VCC = 0V, 3.6V or 5.5V; VIN = 12V 6
Output leakage current (Y, Z) IOZ -40 -10 µA DE = 0V, VCC = 0V, 3.6V or 5.5V; VIN = -7V 6
Driver short-circuit current, VO = high or low IOSD1 -250 250 mA DE = VCC, -7V ≤ VO ≤ 12V, VCC ≤ 3.6V (Note 9) 6
Driver short-circuit current, VO = high or low IOSD1 -450 450 mA DE = VCC, 0V ≤ VO ≤ VCC, VCC > 3.6V (Note 13) 6
No-load supply current ICC 120 150 µA DI = 0V or VCC, DE = VCC 6
Shutdown supply current ISHDN 0.01 1 µA DE = 0V, DI = 0V or VCC 6
ESD, RS-485 pins (Y, Z) Human Body Model -16.5 16.5 kV From bus pins to GND, 25°C 6
ESD, RS-485 pins (Y, Z) IEC61000 contact -7 7 kV From bus pins to GND (contact method), 25°C 6
ESD, all pins HBM -8 8 kV Per MIL-STD-883 Method 3015, 25°C 6
ESD, machine model -400 400 V 25°C 6
Maximum data rate (20Mbps version) fMAX 20 Mbps VOD = ±1.5V, CD = 360pF (Figure 7) 7
Driver single-ended output delay tSD 15 42 ns RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC; typ printed as 29, 23 7
Part-to-part output delay skew tSKPP 25 ns RDIFF = 54Ω, CD = 50pF (Figure 5, Note 10) 7
Driver single-ended output skew tSSK 3 7 ns RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC 7
Driver differential output delay tDD 42 ns RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC; typ printed as 29, 22 7
Driver differential output skew tDSK 0.5 3 ns RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC ≤ 3.6V 7
Driver differential rise or fall time tR, tF 9 15 ns RDIFF = 54Ω, CD = 50pF (Figure 5); VL = VCC 7
Driver enable to output high tZH 250 ns RL = 500Ω, CL = 50pF, SW = GND (Figure 6) 7
Driver enable to output low tZL 250 ns RL = 500Ω, CL = 50pF, SW = VCC (Figure 6) 7
Driver disable from output high tHZ 60 ns RL = 500Ω, CL = 50pF, SW = GND (Figure 6) 7
Driver disable from output low tLZ 60 ns RL = 500Ω, CL = 50pF, SW = VCC (Figure 6) 7
Thermal resistance, junction to ambient, 6 Ld SOT-23 θJA 177 °C/W Typical; Note 5 test board, free air 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ISL3295EIHZ-T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: isl3295eihz-t-etched.step / isl3295eihz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl3295eihz-t.step / isl3295eihz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Intersil(Renesas Electronics) datasheet (17 pp, sha256 6293e8594b781ae5, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF